







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in El Monte, CA: What It Costs and How Fast It Goes
Replacing a bathroom vanity, re-tiling the floor and shower surround, and swapping fixtures in El Monte usually runs $9,000 – $28,000, with a typical vanity-and-tile bathroom landing in the $9,000 – $16,000 band. Plan on 5 – 10 working days once materials are on site. Call (888) 271-7872 for a free on-site estimate, a written line-item quote, and no-hassle upfront pricing.
How We Run a Tile, Vanity & Fixture Job, Day by Day

Every vanity, tile and fixture job follows the same sequence. Here’s what actually happens, and what you decide at each stage.
Stage 1: Measure and set the scope (day 1, 2 – 3 hours)
We measure the vanity alcove, check the drain and supply locations, and photograph the subfloor. You decide the vanity size (30″, 36″, 48″ or a custom width), the countertop material, and whether the floor tile stays or comes up. Rough-in problems get flagged here, not on day five.
Stage 2: Permit pull and material order (2 – 5 days)
Where the scope touches plumbing relocation, electrical, or a re-tiled shower pan, the City of El Monte plan-check process starts now. You get a written quote with the vanity, tile, and fixtures called out as separate line items, and you lock the finish selections before anything gets demolished.
Stage 3: Demo and prep (1 – 2 days)
Old vanity, toilet, and tile come out. We inspect the subfloor for rot and the walls for water damage behind the surround, and we check the shut-off valves and any aging plumbing before the new work closes it back in.
Stage 4: Rough-in and tile (2 – 4 days)
Any valve or drain relocation gets done and inspected, then the floor tile and shower tile go down, followed by grout and cure time. Waterproofing on the shower surround is the step you never see but the one that matters most.
Stage 5: Vanity, top, and fixtures (1 – 2 days)
Vanity gets set and leveled, the countertop is fit and the sink is set into it. Faucet, shower trim, mirror, toilet reset, and a full leak test close out the job. You get the final walkthrough with the fixtures working before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Move the Result
- Vanity build: stock cabinet from a big-box store (cheapest), semi-custom from a brand like KraftMaid with the right depth and drawer layout, or custom-built for a tight alcove. Semi-custom is the middle ground most El Monte bathrooms land on.
- Countertop: cultured marble is the budget default, quartz or a brand like Cambria handles moisture and wear better and holds its value, granite is the heavy-hitter if you want a statement piece.
- Floor tile: porcelain is durable and easy to clean, natural stone like travertine looks warmer but wants sealing, and large-format tiles cut grout lines and clean-up time.
- Shower tile: the trade-off is between grout-heavy layouts (small tiles, more cleaning) and large-format panels (fewer joints, more precise waterproofing). Both work; one suits a family, the other suits a low-maintenance owner.
- Fixtures: a named faucet and shower trim brand like Kohler or Moen gives you replacement parts down the line. Cheap fixtures leak first and fail quietly on the inside.
We carry a curated brand portfolio across every trade, so you’re choosing between quality options, not just what’s on the shelf. That’s how a bathroom job gets built to last, backed in writing.
What Vanities, Tile & Fixtures Costs in El Monte, CA

Most El Monte jobs land between $9,000 and $28,000. Here’s what drives a job to the low or high end:
| Scope | Typical $ Range |
|---|---|
| Bathroom Vanity Installation | $800 – $3,000 |
| Small Bathroom Remodel (vanity, tile, fixtures) | $5,000 – $12,000 |
| Bathroom Remodel (full scope) | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Shower Replacement | $3,000 – $8,500 |
Variables that push the number:
- Size: a half-bath with a single vanity is a different price than a full hall bath with a tub and shower.
- Condition: older El Monte homes with original plumbing or a soft subfloor add demo and repair cost.
- Relocation: moving a drain, supply line, or the toilet rough-in adds permit and labor scope.
- Material grade: stock vanity and cultured marble sit at the bottom, semi-custom and quartz or Cambria at the top.
- Permit scope: plumbing or electrical changes trigger plan-check; tile-only swaps often don’t.
Your written estimate lists the demo, rough-in, tile, fixtures, and permit line items separately. What typically isn’t included: structural repairs uncovered during demo, and any code upgrades that come up mid-job. If a change gets found, you get a written change order before we touch it. The number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat El Monte Homes Specifically Do to This Job
Most of the housing stock we walk into here is post-WWII, 1940s – 1960s single-story tract and stucco bungalows on compact lots. That means original galvanized or early copper plumbing behind the wall, and often 1980s-era remodel work layered on top of it. When we open a wall for a vanity swap, we find it before the tile goes on, not after. El Monte homes also sit on clay-heavy soils with real seismic exposure, so the subfloor and the wall behind the shower get checked, not assumed. Because the city is built out, almost every job is an infill remodel rather than new construction, and the City of El Monte plan-check process is thorough before the permit is issued. We handle that step, pass the inspections, and don’t hand you a pile of paperwork to file yourself. If a garage conversion or rear-unit rental is happening on the same property, jobs often get sequenced together – if you’re planning a full Bathroom Remodeling in El Monte, we fold the vanity, tile and fixture scope in as one build.
Serving El Monte, CA – Our Local Coverage Area
We serve El Monte and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in El Monte

Plan on 5 – 10 working days: 2 – 3 days for demo and prep, 2 – 4 for tile, 1 – 2 for the vanity and fixtures. A vanity-only swap can be a single visit. Call (888) 271-7872 for an exact quote for your bathroom.
If plumbing, electrical, or a shower pan is moving, yes – the City of El Monte plan-check applies, and we pull the permit and pass the inspection. Tile and vanity swaps without relocation often don’t require one. We’ll tell you in the estimate which side you’re on.
Yes, and that’s the cheaper path. Many El Monte jobs keep the drain and supply lines exactly where they are and just swap the vanity, tile, and fixtures. That’s often a $5,000 – $12,000 job instead of $9,000 – $28,000.
Vanities, tile & fixtures in El Monte runs $9,000 – $28,000 for a full bathroom scope, or $5,000 – $12,000 on a small bath. Call (888) 271-7872 for an exact quote – estimates are free.
Every job is covered by our 730-Day Done Right Promise. If a tile line, a fixture, or an installation issue isn’t right, we make it right. Our technicians have up to 12 years of experience and are background-checked and uniformed on every call.
Schedule a Free Estimate for Vanities, Tile & Fixtures
Call (888) 271-7872 and a live person answers, any time, any day. We’ll set a time to walk your bathroom, measure the actual space, and hand you a written line-item estimate with materials and labor split out – no surprises, no commitment to book. Financing at 0% for 18 months is available, plus $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of El Monte.












