







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in La Puente, CA: What the Job Actually Costs and Takes
A vanity, tile and fixtures package for a La Puente bathroom runs $9,000 – $28,000, with most jobs landing between $12,000 and $19,000, and takes 2 to 4 weeks of working time once materials are on site. A vanity swap alone is a 1-day job; floor and shower-wall tile with new fixtures is what stretches the schedule. Fixture and tile selections need to be locked roughly 10 days before demo, because special-order vanities and tile dye lots don’t move on your timeline. Call (888) 271-7872 for a free on-site estimate.
How we run a vanity, tile and fixture job from demo day to final walkthrough

Bathroom work on a compact La Puente lot lives or dies on sequencing. Here’s the order we actually work in, and what you’re deciding at each step.
Stage 1: Scope walk and selections (week 1, before any demo)
We measure the room, photograph the existing plumbing and electrical, and flag anything that looks like non-permitted prior work – converted garages and back-bedroom baths are where we find it most. You leave this visit with a written line-item estimate and a list of what you need to pick: vanity width and finish, tile for floor and walls, faucet, shower trim, and lighting. Upfront pricing means the number on the estimate is the number you pay, assuming the walls behind the tile match what we saw.
Stage 2: Demo and substrate prep (1 – 2 days)
We pull the old vanity, toilet, tile, and any drywall behind it, then inspect the framing and the subfloor. This is the stage where surprises surface: soft subfloor near the tub, galvanized stub-outs that won’t hold a new valve, an outlet that needs a dedicated circuit for a lighted mirror. Cement backer board goes down over the subfloor and behind the shower walls. Your only decision here is approving any hidden-condition change before we proceed.
Stage 3: Rough-in and inspection (2 – 3 days)
Relocating a drain, moving the vanity supply lines, or adding a GFCI circuit means a permit and an inspection. We handle the permit pull and meet the inspector. If nothing is moving, this stage compresses into a half day of valve and drain prep – which is a big chunk of the reason one job prices at $10,000 and the identical-looking room next door prices at $22,000.
Stage 4: Tile set and grout (3 – 5 days)
Floor tile first, then shower walls and niche, then the vanity backsplash. Large-format tile over a flat floor moves fast; a herringbone pattern, a mosaic shower pan, or a lot of cuts around a window slows it down. Grout cures 24 hours before we set the fixtures and seal.
Stage 5: Vanity, fixtures, and punch (2 – 3 days)
Vanity set and leveled, top and sink installed, faucet and drain connected, shower trim and toilet set, mirror and lighting hung, caulk and seal. We run water, check for leaks, and do a final walkthrough with you. Any punch item gets fixed before we call it done, and the whole job sits behind our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between on this job
- Vanity build: a stock big-box vanity is the cheapest route and fine for a hall bath. A semi-custom cabinet line like KraftMaid gives you the width and door style that fits an odd alcove, and it’s where most La Puente homeowners land. Full custom is worth it only when the room is genuinely irregular.
- Vanity top: cultured marble is the low-cost, low-maintenance pick; quartz (a Cambria or similar slab) resists staining better and looks the part; a stone remnant can beat a full slab price when the vanity is under 48 inches.
- Floor tile: porcelain is the default – dense, water-resistant, and priced well. Travertine and marble look richer but need sealing and show etching from hard water.
- Shower wall tile: large-format porcelain means fewer grout lines to keep clean. Small mosaic and penny tile cost more in labor, not material.
- Fixtures: Kohler and Moen trim sets hold up to daily use. The honest trade-off is finish: brushed nickel and chrome hide water spots, matte black and oil-rubbed bronze show them.
- Prefab vs. built-up shower base: a preformed pan is faster and cheaper; a tiled mud-set pan costs more but lets the floor and walls match.
- Accessories that change the budget: a lighted mirror or a heated floor mat each add real money once you account for the electrical circuit.
What vanities, tile and fixtures cost in La Puente, CA

Expect $9,000 – $28,000 for a full vanity, tile and fixture package here. A vanity-only installation runs $800 – $3,000, and a shower replacement sits around $3,000 – $8,500 – but this page is the combined job, so the $9,000 – $28,000 band is the number to plan around.
What pushes a job toward the low end: an existing layout you’re keeping, porcelain floor tile, a stock or semi-custom vanity, no permit needed. What pushes it to the top: moving the drain or supply lines, adding an electrical circuit, a tiled shower pan, natural stone, and a lot of cut work. The variables that move the number most are room size, the condition behind the old tile, whether plumbing or electrical relocates, material grade, and whether the job needs a permit and inspection.
A written estimate from us lists each line – demo, backer board, tile by square foot, vanity and top, each fixture, labor, permit – so you can see where the money goes. It typically does not include structural repairs if we open a wall and find rot or a cracked joist; that’s quoted separately before we touch it. No-hassle upfront pricing, and 0% financing for 18 months if it helps the budget.
See the difference
Before
After
Before
After
Before
AfterWhat La Puente homes specifically do to this job
Most of the bathrooms we open in La Puente are inside 1950s – 60s stucco tract houses on tight lots, and that build era drives the scope. Galvanized supply lines and older electrical panels are common, so a vanity relocation that looks simple on paper often means a partial re-pipe or a new circuit before the new fixture can go in. That’s a permit-and-inspection item, and we pull it – a legal remodel here has to pass inspection, or it becomes a problem at resale.
The non-permitted work is the other recurring story. Garages and back rooms converted to living space without permits turn up regularly, and we can’t legally remodel around it until it’s addressed. On the older streets toward the Puente Hills, we also find settling and soft subfloor tied to grading and drainage, so a floor tile job sometimes starts with a subfloor repair. We cover all of La Puente and the surrounding ZIPs (91744, 91746, 91749, 91747) – part of a Bathroom Remodeling in La Puente when you’re ready to go wider, or our Bathroom Remodeling service across the board. Homeowners often pair this with Tile Roofing in La Puente or Specialty Roofing in La Puente once the exterior is on the list. See everything we do in La Puente.
Serving La Puente, CA – Our Local Coverage Area
We serve La Puente and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – vanities, tile & fixtures in La Puente

Most run 2 to 4 weeks of working time once materials arrive, plus a 10-day lead window for special-order vanities and tile. A vanity swap alone is a day; the tile and fixture work is what stretches it. Call (888) 271-7872 and we’ll give you a schedule for your specific room.
You need a permit if plumbing, electrical, or the layout moves – relocating a drain, adding a GFCI circuit, moving supply lines. A straight swap in the same location usually doesn’t. We pull the permit and meet the inspector when it’s required. Call for a free estimate and we’ll tell you which side of that line your job falls on.
Yes – keeping the vanity, toilet, and shower in their existing locations is the single biggest cost saver and keeps you near the low end of the $9,000 – $28,000 range. New tile, a semi-custom vanity, and updated fixtures transform the room without touching a drain. Call (888) 271-7872 to talk through a keep-the-layout plan.
The full package runs $9,000 – $28,000, with most jobs between $12,000 and $19,000. Vanity installation alone is $800 – $3,000, and a shower replacement is $3,000 – $8,500. Call (888) 271-7872 for an exact written, line-item quote – the estimate is free.
Every job is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right, for two full years on workmanship. Calls are answered by a live person 24/7, and technicians are background-checked and arrive in uniform. Call (888) 271-7872 to schedule your free estimate.
Get a free estimate on vanities, tile and fixtures in La Puente
Call (888) 271-7872 and we’ll set a free on-site estimate for your vanity, tile and fixture work in La Puente. We measure the room, check what’s behind the existing tile, and hand you a written line-item quote with the materials spelled out and the price fixed. You’ll know what the job includes, what it doesn’t, and what it costs before anything gets demoed.
Written by the team at Groundwork Construction Co.












