







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Vincent, CA: What It Costs and What’s Involved
A wood fence in Vincent, CA generally runs $3,500 to $9,000 for a typical residential lot, with most mid-century 91722 properties landing between $4,200 and $6,800. That covers removal of the old fence, posts set in concrete, and a finished 6-foot board fence in cedar or pressure-treated pine. Most jobs take 2 to 4 working days once materials are on site. Call (888) 271-7872 for a free on-site estimate and a written line-item price.
From First Stake to Final Board: How a Wood Fence Gets Built Here

Building a fence on a small Vincent lot is less about the wood and more about what’s buried and where the property line actually falls. Here’s the order we work in.
Stage 1: Site walk and property line check (day 1, about an hour)
We walk the run with you, confirm the property line against your plat or a recent survey, and flag anything that will change the price: roots, a shared fence with a neighbor who needs to agree on the style, or a slope that needs stepping. You decide the height, the material, and the gate placement at this stage. If there’s any question about the line, we tell you before a shovel touches dirt.
Stage 2: Utility locate and demo (day 1 to day 2)
We call in the 811 locate before digging – non-negotiable on 1950s-era lots where irrigation, gas stub-outs, and old cable runs sit shallow and undocumented. Once locates clear, we pull the old fence and haul it off. On most Vincent lots the demo takes half a day. If the old posts are set in concrete, they come out whole rather than getting cut at grade, so the new post has clean soil to bear on.
Stage 3: Post setting and concrete cure (day 2 to day 3)
Posts go in at 8-foot spacing on most runs, 6-foot on taller or gate-adjacent sections. Holes get dug below the frost-irrelevant but still necessary 24-inch depth, set with gravel at the bottom for drainage, and filled with concrete that needs a full cure before we hang boards. That cure is the reason a fence job spans multiple days even when the run is short.
Stage 4: Framing and board installation (day 3 to day 4)
Rails, then boards, then a top cap if you chose one. We space boards per your privacy call – tight for full screening, a small gap if you want wind to pass through and reduce seasonal movement. Gates get their own reinforced frame and a hardware set you pick.
Stage 5: Walkthrough and touch-up (final day)
We walk the run with you, check every gate swing, touch up any fasteners or cuts, and leave the 730-Day Done Right Promise in writing. If something shifts or a gate sags in the first two years, we come back and fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Wood fence is a category, not a product. These are the real forks in the road, with the honest trade-off on each.
- Cedar vs. pressure-treated pine. Cedar costs more up front but resists rot and insects naturally and holds stain better in Vincent’s summer sun. Pressure-treated pine is cheaper and lasts well when it’s properly sealed, but it wants re-sealing every few years and can warp in the heat.
- Dog-ear vs. flat-top boards. Dog-ear is the classic look most 91722 homes were built with. Flat-top reads more modern and pairs well with newer infill construction.
- Board-on-board vs. side-by-side. Board-on-board overlaps for full privacy and hides the rails from the street; side-by-side shows the frame and costs less. Board-on-board uses more material, which shows up in the price.
- Height: 4, 5, or 6 feet. Six feet is standard for privacy. Anything over 6 feet in an unincorporated LA County pocket needs a closer look at what’s allowed and can require a permit – we sort that out before you commit.
- Stain vs. natural. A penetrating stain slows the sun damage and evens the color. Left raw, cedar greys out in two to three seasons; that’s a look some homeowners want and others don’t.
- Gate hardware. Self-closing hinges and a heavier latch for a driveway gate, lighter hardware for a side-yard walk gate. You pick the style; we spec the load rating to match.
What Wood Fence Costs in Vincent, CA

Plan on $3,500 to $9,000 for a wood fence in Vincent, with the middle of that band covering most standard residential runs. Five things push a job toward one end or the other:
- Linear feet. The single biggest driver. A short side-yard run sits near the low end; a full perimeter pushes toward the top.
- Demo and haul-away. Removing an old fence with concrete-set posts adds labor and disposal. A clean lot with no existing fence sits lower.
- Material grade. Cedar and board-on-board run higher than pressure-treated side-by-side. The gap can be a couple thousand dollars on a large run.
- Terrain and access. A slope that needs stepped panels, or a run that backs onto a tight alley, adds time and labor.
- Permit scope. A standard 6-foot residential fence usually doesn’t need a permit in this County pocket, but taller sections or work near a corner lot sightline can – and that’s a real line item.
Every written estimate breaks these out line by line: linear feet, material type, demo, gate count, stain if you want it. What’s typically not in the base number: stump or root grinding on the fence line, and neighbor cost-sharing arrangements on a shared fence. We flag both up front so there are no surprises. Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Vincent Homes Specifically Do to a Wood Fence Job
Vincent is an unincorporated pocket, and that changes the paperwork. Nearly all construction here runs through LA County’s permitting and inspection process rather than a city hall, so we build schedules around County Building & Safety plan checks and field inspectors. One town over in Azusa or Covina, those cities run their own building departments – and a project near the border can shift jurisdiction block by block. That detail regularly trips up out-of-area contractors bidding here, and it’s the first thing we confirm before we quote a job that needs any inspection at all.
The housing stock shapes the work too. The 91722 area is dominated by 1950s to 1970s single-story tract homes on small lots, many with attached garages and later room additions. That means short fence runs, tight side yards, and property lines that were never surveyed precisely when the tract went in – which is why we verify the line before digging. The local climate adds its own pressure: summer heat well above 90°F and intense sun bake stain and sealant off wood faster here than on the coast, and the Santa Ana wind season works at every post and rail. We set posts deeper and spec fasteners accordingly. Homeowners often pair this with Paver Driveways in Vincent or Concrete Driveways & Concrete Work in Vincent when the front yard is getting reworked at the same time, and if the fence is part of a full Fence Installation in Vincent plan, we scope it as one project. For a wider look at our Fence Installation work, or to see everything we cover across Vincent, start there.
Serving Vincent, CA – Our Local Coverage Area
We serve Vincent and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Wood Fence in Vincent

Most residential runs take 2 to 4 working days from demo to walkthrough, with the concrete cure time on the posts driving the schedule as much as the build itself. A short side-yard run can finish in two days; a full perimeter with multiple gates runs closer to four. Call (888) 271-7872 for an exact timeline on your property.
A standard 6-foot residential fence usually doesn’t require a permit in Vincent’s unincorporated County jurisdiction, but taller sections or work near a corner sightline can, and we confirm that before quoting. Because Vincent runs through LA County rather than a city building department, the process looks different than it would one town over. We handle the permit question in the estimate, not after the fact.
Almost always, yes. The one thing we won’t skip is the 811 utility locate before digging, because older 91722 lots can have shallow irrigation, gas stub-outs, or cable runs that aren’t on any map. If the locate turns up a conflict, we route a post around it rather than through it. Call (888) 271-7872 if you’ve had a locate issue on your lot before.
Expect $3,500 to $9,000, with most Vincent properties landing between $4,200 and $6,800 depending on linear feet, material, and whether there’s an old fence to remove. The variables that move it most are run length, cedar vs. pressure-treated, and board-on-board vs. side-by-side. Call (888) 271-7872 for a written line-item quote – estimates are free.
Every wood fence we build is backed by the 730-Day Done Right Promise: if it isn’t done right, we make it right, for two full years on workmanship. Material warranties come from the mill and vary by product. Nothing about that guarantee is conditional on fine print. Call (888) 271-7872 to schedule your free on-site estimate.
Get a Free Wood Fence Estimate in Vincent
Call (888) 271-7872 to schedule a free on-site estimate for your wood fence in Vincent. We’ll walk the run, confirm the property line and any County permitting question, and hand you a written line-item quote with the material, height, and gate count broken out – no vague lump sum. A live person answers the phone around the clock, and the number you see on the estimate is the number you pay. Estimates are free, and financing at 0% for 18 months is available if you need it.
Written by the team at Groundwork Construction Co.












