







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Vincent, CA: What the Job Actually Involves
Custom & geometric windows in Vincent, CA typically run $4,500 – $15,000 for a whole-house package of shaped units (arches, half-rounds, trapezoids, angled corner glass), and $8,000 – $25,000 when impact-rated glass and structural reframing are part of the scope. A single feature unit with a custom arch or angled bay usually lands between $1,200 and $4,000 installed, and most projects take two to four weeks from template to final trim. Call (888) 271-7872 for a free on-site estimate.
How custom and geometric window work runs, stage by stage

Shaped windows don’t come off a shelf, so the sequence matters more than it does for a standard replacement. Here’s what we actually do, in order.
Stage 1: Field measure and template (day 1, about 90 minutes)
We measure the existing opening, check the rough framing for square and level, and confirm the wall assembly behind the stucco. For true arches and angled bays we build a physical template on site. You decide the glass package and the frame material at this visit, because both affect the order.
Stage 2: Drawings and your approval (days 2 – 5)
We produce a shop drawing showing radius, rise, mullion layout, and sightlines. This is the step where you approve the geometry in writing. A half-round that looks graceful on paper can read different once the sun hits it, so we walk you through the sightline drawing before anything is ordered.
Stage 3: Permitting through LA County (days 5 – 25, varies)
Because Vincent is unincorporated, the plan check runs through LA County Building & Safety rather than a city building department. Custom geometry sometimes triggers a structural review for the header and framing, which adds time. We pull the permit and manage the inspections.
Stage 4: Fabrication (4 – 8 weeks, the long pole)
Custom arches and angled units are built to order. Andersen and Marvin both run 4 – 8 weeks on shaped products depending on the finish and glass. You’re not waiting on us here; you’re waiting on the factory, and we tell you the realistic date upfront.
Stage 5: Install and finish (2 – 4 days)
Demo, reframe, set the units, flash and seal, then trim and stucco patch. Geometric windows need careful flashing at the curve, and the angle of the head and sill has to shed water correctly. We finish with a final inspection and a walkthrough.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between for geometric window units
Three decisions drive both the look and the price of custom & geometric windows in Vincent. Here’s the honest trade-off on each.
- Frame material: Vinyl is the most economical and holds up well in Vincent’s heat, but it limits how tight a radius you can get and the frame is thicker. Wood-clad (Andersen, Marvin) allows crisper geometry and a slimmer profile; it costs more and needs some finish care on the interior. Aluminum is durable and great for large angled units but conducts heat.
- Glass package: Standard dual-pane is fine for most shaded elevations. On west- and south-facing shaped units, low-E with argon and a warm-edge spacer pays back in comfort, since Vincent summers push past 90°F and a big arch catches a lot of sun. Impact-rated laminated glass is a step up in cost but adds security and noise reduction.
- Geometry and configuration: A half-round transom is the least expensive shaped unit. True arches, trapezoids, and angled corner windows cost more because they require custom framing and, in some cases, structural header work. The more complex the shape, the more template and fabrication time.
What Custom & Geometric Windows cost in Vincent, CA

Expect $1,200 – $4,000 per shaped unit installed, or $4,500 – $15,000 for a whole-house package of several geometric windows. Impact-rated packages run $8,000 – $25,000. Five things push a job toward the low or high end:
- Number and complexity of shapes: one half-round on a gable versus six arched and angled units across a facade.
- Existing wall condition: rotted framing or cracked stucco around an old opening adds demo and repair.
- Structural work: widening an opening for an angled bay or a larger arch often needs a new header and possibly an engineer’s stamp.
- Glass and frame grade: standard dual-pane vinyl at the low end; wood-clad with low-E and impact glass at the top.
- Permit scope: a like-for-like swap is simpler than a scope that changes the opening size or adds structural framing through LA County.
Every written estimate is line-itemed: units, labor, flashing, trim, stucco patch, permit fees, and disposal. What typically isn’t included: interior painting, blinds or shutters, and any drywall repair beyond the immediate window opening. The number you see is the number you pay, and projects over $10,000 take $1,000 off with 0% financing for 18 months available.
See the difference
Before
After
Before
After
Before
AfterWhat Vincent homes specifically do to this job
The 91722 housing stock is mostly mid-century single-story tract homes from the 1950s through the 1970s, many with later room additions tacked on, and a growing share of newer two-story infill and ADU construction. That mix matters for geometric windows: on a 1960s tract home, an arched unit usually replaces an original rectangular opening, so we’re adding framing where the old wall was never designed for a curve. On newer infill, the openings are already sized for shaped glass and the work is cleaner. The bigger local wrinkle is jurisdiction. Because Vincent is unincorporated, a project near the Covina or Azusa border can shift from County to city review block by block, which regularly trips up out-of-area contractors bidding here. We plan the permit path before we order a single unit. And Vincent’s intense sun and Santa Ana wind season mean we spec the glass and flashing for heat and wind-driven rain, not just looks. If you’re pairing the windows with a larger project, our Windows & Doors in Vincent page covers the full scope, and homeowners often pair this with Concrete Driveways & Concrete Work in Vincent to match the curb line.
Serving Vincent, CA – Our Local Coverage Area
We serve Vincent and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Custom & Geometric Windows in Vincent

Plan on six to eleven weeks end to end: about a week for measuring and shop drawings, two to four weeks for LA County permit review if the scope requires it, four to eight weeks for factory fabrication, and two to four days to install. The fabrication lead time is the largest single factor. Call (888) 271-7872 and we’ll give you a realistic date based on the units you want.
Yes, if the scope changes the opening size, the framing, or adds structural support, which custom arches and angled bays usually do. Because Vincent is unincorporated, the permit runs through LA County Building & Safety. A strict like-for-like swap in the same opening may not need one, and we’ll tell you which situation you’re in.
Sometimes. A unit that fits the existing opening needs only the frame and sill reworked. A larger arch or angled bay that widens the opening usually requires a new header and framing changes, and that’s where a permit and possibly engineering come in. We assess this at the day-1 measurement.
Single shaped units run $1,200 – $4,000 installed, a whole-house package of several geometric units runs $4,500 – $15,000, and impact-rated packages run $8,000 – $25,000. Call (888) 271-7872 for an exact quote; estimates are free and line-itemed.
Our workmanship is covered by the 730-Day Done Right Promise, and the manufacturer’s product warranty on the units applies on top of that. If a shaped unit isn’t set, flashed, or sealed right, we make it right within that window. Ask for both the product and labor warranty in writing with your estimate.
Get a free estimate on custom & geometric windows in Vincent
We’ll come to your home, measure the openings, build templates where the shapes demand it, and hand you a line-itemed written estimate with a realistic lead time. Calls are answered by a live person around the clock, so you won’t hit voicemail. Reach us at (888) 271-7872 to schedule your free estimate, and our Windows & Doors service covers every shaped unit we install across Vincent.
Written by the team at Groundwork Construction Co.












