







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Monrovia: What It Costs and How Long It Takes
Walk-In Showers & Shower Remodeling in Monrovia typically runs $4,500 – $12,000 for a full walk-in shower installation and $3,000 – $8,500 for a straight shower replacement, with a complete bathroom remodel that includes one landing in the $9,000 – $28,000 range. Most shower-only jobs are finished in 5 to 10 working days once materials are on site. Call (888) 271-7872 for a free on-site estimate.
Key Takeaways
- Walk-in shower installation in Monrovia runs $4,500 – $12,000; a shower replacement runs $3,000 – $8,500.
- Plan on 5 – 10 working days for a shower-only job, longer if plumbing or framing moves.
- Old Town and the flat grid near Myrtle Avenue often need a permit and design review that a hillside job above the ‘L’ street line won’t trigger.
- Every job is backed by our 730-Day Done Right Promise, and pricing is upfront with no change orders.
How a walk-in shower goes from demo to final walkthrough

We run this job in a fixed sequence so you know what’s happening in your house on any given morning. Here’s the real order of operations.
Stage 1: Site protection and demolition (day 1, sometimes into day 2)
We seal off the doorway with plastic and zip walls, lay floor protection down the path from the front door, and shut off water to the bathroom. Then the old pan, tile, backer board, and any tub come out. On a Monrovia bungalow, this is where we find out what’s behind the wall: cast iron drains, galvanized supply lines, or a mud-set pan that’s been holding water for decades. You don’t decide anything here; we photograph what we find and send it to you the same day.
Stage 2: Framing and rough-in (days 2 – 3)
If the layout stays put, this is fast. If you’re moving the drain or valve to a new wall, the plumber sets the new drain line and valve body now, and an electrician runs the circuit if you want a heated floor or a lighted niche. This is your decision point on plumbing relocation: keep the drain where it is and save $800 – $2,000, or move it and get the layout you actually want.
Stage 3: Inspection (day 3 or 4)
A permitted job gets its rough plumbing and electrical inspection before anything closes up. We schedule it, meet the inspector, and don’t board over a wall until it’s signed off. This is the step that separates a job that appraises and sells later from one that doesn’t.
Stage 4: Waterproofing and tile (days 4 – 8)
Cement backer or a bonded waterproof membrane goes up, seams get taped and coated, and the pan gets a pre-slope so water moves toward the drain instead of sitting. Then tile. Large-format panels go up faster than small mosaic, which is part of why material choice moves the schedule. You’ll pick your niche placement and tile layout before this stage, not during it.
Stage 5: Glass, fixtures, and punch list (days 8 – 10)
Glass gets templated after tile is set, so add a few days if you’re going frameless. Trim, valve trim, showerhead, and any grab bars go in. We water-test, run the shower, check for leaks, and walk the job with you before we call it done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Most of the decisions on this job come down to five categories. Here’s the honest trade-off on each.
- Pan type: tile-and-mortar vs. acrylic or solid-surface base. A tiled pan with a proper pre-slope looks seamless and adds resale value, but it’s the most install-sensitive part of the job. A prefab acrylic or solid-surface pan costs less and installs faster, and it’s the smarter call in a rental or a secondary bath.
- Wall surface: large-format porcelain vs. mosaic vs. slab. Large-format panels (24×48 and up) mean fewer grout lines and easier cleaning; expect a modest material premium and less labor. Mosaic gives you a grippier floor but more grout to maintain. Slab walls look great and cost the most.
- Glass: frameless vs. framed vs. no door at all. Frameless glass is the upgrade most people picture, and it’s the priciest. A framed slider is a solid mid-range choice. A curbless, doorless walk-in works well in a larger footprint and needs a linear drain.
- Drainage and floor: curb vs. curbless. Curbless is the accessible choice and the harder install, since the floor has to slope to a linear drain and the subfloor gets recessed. Budget for it.
- Fixtures and finish. Kohler and Moen are the two lines we install most; the difference between a builder-grade and a mid-tier valve is real when it comes to temperature control and how long the cartridge lasts. Grab bars and a bench are worth planning for now, not retrofitting.
What Walk-In Showers & Shower Remodeling costs in Monrovia, CA

Here’s the line-item range we quote for Monrovia, based on the actual scope of the job.
| Scope | Typical range |
|---|---|
| Shower replacement (same footprint, new tile and fixtures) | $3,000 – $8,500 |
| Walk-in shower installation (new pan, curbless or curbed) | $4,500 – $12,000 |
| Full bathroom remodel including a walk-in shower | $9,000 – $28,000 |
Five things push a job from the low end to the high end. Size is the first: a 36×48 shower is a different number than a 60-inch double. Existing condition is second, because a century-old bungalow near Old Town can hide rotten framing, old galvanized lines, or a failed subfloor that a 1990s hillside home won’t. Plumbing relocation is third, at roughly $800 – $2,000 depending on how far the drain and valve move. Material grade is fourth, and it’s where you have the most control. Permit scope is fifth: a permit and inspection adds cost, but skipping it is a mistake you’ll pay for at resale. A written estimate covers demo, waterproofing, tile setting, fixtures, and cleanup. It typically excludes glass (templated separately) and any hidden rot we can’t see until the wall opens. We price upfront and the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Monrovia homes specifically do to this job
Monrovia’s housing stock splits sharply, and the split changes the shower job. On the flat grid near Old Town and along Myrtle Avenue (91016), we’re usually working in 1920s Craftsman and Spanish Colonial bungalows. Those homes sit on older clay and expansive soils, which shows up as out-of-level floors and settled pans, and the historic downtown core carries design-review constraints that most neighboring SGV cities don’t enforce as strictly. That means a same-size shower job in Monrovia can need a permit path a Duarte or Arcadia job wouldn’t. Up in the foothills above the ‘L’ street line, the homes are mid-century and later, and the issues are different: slope, retaining walls, and the debris-flow watch zones at the canyon mouths above town. We plan around the atmospheric-river storms that follow the long dry season, because that’s when water intrusion shows up in a shower pan or a hillside wall. If you’re also tightening the envelope while the wall is open, homeowners often pair this with Metal Roofing in Monrovia or a Roof Replacement & Installation in Monrovia. And if you’re ready to widen the scope, this is part of a full Bathroom Remodeling in Monrovia project, which sits under our Bathroom Remodeling service. We cover all of Monrovia, ZIP codes 91016 and 91017 included.
Serving Monrovia, CA – Our Local Coverage Area
We serve Monrovia and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Walk-In Showers & Shower Remodeling in Monrovia

A shower-only job takes 5 to 10 working days once materials are on site; a full bathroom remodel runs 2 to 4 weeks. Add a few days if you’re moving plumbing or going frameless with templated glass. Call (888) 271-7872 for a schedule tied to your specific job.
Yes, if you’re moving plumbing, adding a drain, or changing the layout. A straight tile-for-tile replacement sometimes doesn’t require one, but in the historic core near Myrtle Avenue the review process is stricter than in neighboring SGV cities. We pull the permit and pass the inspection for you.
Yes, and it’s the most common job we do. Keeping the drain and valve in place cuts cost and time, and you still get a new pan, new tile, and new fixtures. We’ll tell you honestly if a layout change is worth the extra money or not.
Walk-in shower installation runs $4,500 – $12,000, and a shower replacement runs $3,000 – $8,500, depending on size, drainage, glass, and material grade. Call (888) 271-7872 for an exact quote; estimates are free.
Every job is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right, and that applies to the waterproofing and tile work that matters most in a shower.
Get a free estimate for your Monrovia shower project
We offer a free on-site estimate for Walk-In Showers & Shower Remodeling in Monrovia. Call (888) 271-7872 and a live person answers, around the clock. We’ll walk your bathroom, talk through the layout and materials, and send a written line-item quote with a fixed price. 0% financing for 18 months and $1,000 off projects over $10,000 are available.
Written by the team at Groundwork Construction Co.












