







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Monrovia: What It Costs and How Long It Takes
Aluminum fence installation in Monrovia runs $3,500 to $9,000 for a typical residential yard, and most jobs are finished in one to three days of on-site work once materials arrive. You’re choosing aluminum because it won’t rot, won’t rust, won’t need staining, and holds a crisp line behind a tight lot. Call (888) 271-7872 for a free on-site estimate, and we’ll walk the property line, check setbacks, and give you a written line-item quote before anyone touches a shovel.
How We Build an Aluminum Fence in Monrovia, Start to Finish

Aluminum isn’t concrete, so the job moves quickly. The slow part is the front end, where we get the layout, the grade, and the approvals right. Here’s the real sequence.
Stage 1: Layout walk and utility check (day 1, half day)
We walk the property line with you and mark each post location with stakes and string. On Monrovia lots near Old Town, that line is often a few feet from a neighbor’s garage or a shared alley easement, so we confirm exactly where your boundary sits. At the same time, we call 811 so every buried utility gets located before an auger goes in the ground. You decide the fence height and where the gates land during this visit.
Stage 2: Permits and HOA coordination (3 to 10 business days, depending on scope)
Most aluminum fence runs under six feet don’t require a building permit in Monrovia, but anything taller, on a slope, or sitting on a retaining wall can trigger plan review. If your home falls under the historic design-review constraints around Myrtle Avenue, we build the submission around that path rather than assume a same-size job in Duarte would clear the same way. You approve the final layout drawing before we submit anything.
Stage 3: Demolition and site prep (half a day)
Old fencing comes out, posts get pulled, and we grade the line so the new fence doesn’t follow a wavy original. If there’s an old wooden fence with concrete footings, those get broken out and hauled away, which matters on the tight lots where there’s no room to leave debris in the side yard. You confirm where the spoil and old panels go if alley access is limited.
Stage 4: Post setting and panel install (1 to 2 days)
We set posts in concrete, plumb and aligned, then hang the panels and gates once the footings cure. Aluminum panels are light enough that a two-person crew sets a full run in a day on most Monrovia yards. Rail-mounted, rackable panels handle grade changes without stepping the top rail, which matters on the sloped lots climbing into the foothills. You pick the final gate swing direction and hardware location before we anchor anything.
Stage 5: Final walk and adjustment (same day)
We walk the finished fence with you, adjust gate latches, confirm post spacing and plumb, and hand over the warranty paperwork. Anything that needs a tweak gets handled before we leave. The 730-Day Done Right Promise covers workmanship for two full years, so if a latch slips or a post settles, you call and we fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Change Your Aluminum Fence
Aluminum isn’t one product. What you pick here decides how the fence looks in year ten and what it costs. A few of the real options:
- Residential vs. industrial grade: Residential panels run thinner walls and lighter rails and suit most Monrovia yards. Industrial grade uses heavier wall thickness and larger posts; worth it on a long perimeter or where kids and dogs lean on the fence.
- Rackable vs. stepped panels: Rackable panels follow grade smoothly, which is the right call on the sloped foothill lots above the ‘L’ street line. Stepped panels look more formal on a flat old-town grid yard.
- Powder-coat finish: Standard black or bronze powder coat holds color and resists chipping. Custom colors cost more and take longer to source, but match trim and railings cleanly.
- Picket spacing and height: Standard 4-foot pickets with 4-inch spacing meet most pool and code minimums. Tighter spacing and taller runs raise material cost and can trigger plan review.
- Gate hardware: Self-closing hinges, keyed latches, and heavier gate frames add cost but are the difference between a gate that swings true for a decade and one that sags by year three.
- Ornamental vs. flat-top rail: Spear-top and ornamental pickets cost more per linear foot and read more traditional. Flat-top reads clean and modern.
What Aluminum Fence Costs in Monrovia, CA

Most aluminum fence jobs in Monrovia land between $3,500 and $9,000. A short backyard run on a flat lot sits at the low end. A full perimeter with two gates, on a slope, with an old fence to remove, lands at the high end. Here’s what moves the number:
- Linear footage: The single biggest driver. Aluminum runs roughly $45 to $80 per linear foot installed, so a 60-foot run versus a 150-foot perimeter is the whole cost story.
- Grade and slope: Rackable panels and extra post depth on a hillside lot add labor. Flat old-town yards are the simplest and cheapest to build on.
- Old fence removal: Hauling off wooden panels and breaking out concrete footings adds cost. Leaving the old fence isn’t usually an option on tight lots.
- Gates: A basic walk gate adds $400 to $900. A wide drive gate with self-closing hardware adds more.
- Permit or design-review scope: Jobs inside the historic core or on a retaining wall can require plan review, which adds time and a fee.
A written estimate from us lists every line: linear footage, post count, gate count, removal, haul-off, permit fees if any, and the final installed price. The number you see is the number you pay, and if we missed something on the walk, that’s on us, not on you.
See the difference
Before
After
Before
After
Before
AfterWhat Monrovia Homes Specifically Do to This Job
Monrovia lots split in ways that change how an aluminum fence goes in. The flat grid near Old Town (91016) is packed with 1920s Craftsman and Spanish Colonial bungalows sitting close to the property line, on older expansive clay soils that shift with the wet-dry cycle. That means post holes and footing depth matter more than they do on a newer subdivision lot, and we set posts deeper and wider on those yards. Up the hill, homes climb into the foothills toward Monrovia Canyon, where the property line often runs along a slope or a retaining wall, and rackable panels are the only clean option. The design-review and historic-preservation constraints around Myrtle Avenue mean a fence inside the Old Town core can require a submission path that a same-size fence a few blocks away won’t. After a hard winter storm, we also see the wash and canyon-mouth lots (Sawpit, Monrovia Canyon) deal with slope movement and drainage that affects where fence posts can safely sit. If your property line runs along a driveway that’s already failing, homeowners often pair this with Driveway Repair & Replacement in Monrovia, and if the fence borders a patio or walkway project, Patios, Walkways & Pool Decks in Monrovia is a natural add. If you’re also thinking about the wider yard scope, our Fence Installation service covers it, and this aluminum work is part of a full Fence Installation in Monrovia when you want the whole perimeter done at once. We serve all of Monrovia and the surrounding area.
Serving Monrovia, CA – Our Local Coverage Area
We serve Monrovia and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Aluminum Fence in Monrovia

A typical Monrovia aluminum fence takes one to three days of on-site work once permits and materials are in hand. Plan on two to three weeks from signed estimate to finished fence if plan review is needed, and about a week if it isn’t. Call (888) 271-7872 for a firm timeline based on your property.
Most fences under six feet on a flat lot don’t require a building permit, but taller fences, fences on retaining walls, and fences inside the historic design-review area near Myrtle Avenue can. We confirm the exact requirement for your address before we submit anything and pull the permit if it’s needed. Call (888) 271-7872 to check your address.
No. Aluminum posts go into the ground along the property line, well clear of plumbing and electrical inside the house, and the work doesn’t touch your home’s structure. We call 811 before we dig to locate buried utilities, so nothing gets hit. Call (888) 271-7872 with questions about your specific layout.
Most Monrovia aluminum fence jobs run $3,500 to $9,000 installed, depending on linear footage, slope, gates, and whether an old fence needs removal. A short flat-lot run sits near $3,500; a full perimeter with two gates on a slope is closer to $9,000. Call (888) 271-7872 for an exact quote; estimates are free.
Every aluminum fence we install is covered by the 730-Day Done Right Promise, our two-year workmanship guarantee. If a post settles, a gate sags, or a latch fails within that window, we come back and make it right. Call (888) 271-7872 to schedule your estimate and review the warranty in writing.
Get Your Free Aluminum Fence Estimate in Monrovia
Call (888) 271-7872 for a free on-site estimate on your aluminum fence in Monrovia. We walk the property line, check setbacks and any design-review constraints, and hand you a written line-item price with no surprises. Calls are answered by a live person, day or night. Upfront pricing, background-checked uniformed technicians, and the 730-Day Done Right Promise on every job.
Written by the team at Groundwork Construction Co.












