







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Whittier, CA: What the Job Actually Costs
Updating a bathroom vanity, floor and wall tile, and the shower or tub fixtures in a Whittier home typically runs $9,000 to $28,000 when tile work, plumbing rough-in and fixtures are bundled together, and most single-bathroom fixture and tile jobs finish in two to four weeks. Call (888) 271-7872 for a free on-site estimate. The number that lands on paper depends far more on what’s behind the old tile than on the fixtures you pick.
How a Vanities, Tile & Fixtures Job Runs, Stage by Stage

We sequence this work so the vanity and fixtures arrive after the tile is finished, not before. A tile job that gets rushed the other way looks great for a month and cracks around the drain flange by summer.
Stage 1 – Site walk and measurements (1 to 2 days). We measure the vanity wall, check floor deflection, photograph the supply and drain locations, and open a small section of wall to confirm what the plumbing and wiring actually are. In older Whittier homes this is where we find out whether a 1950s vanity sits on old galvanized supply lines. You decide the rough budget and the fixture package by the end of this stage.
Stage 2 – Demo and substrate prep (2 to 3 days). We pull the vanity, toilet and old tile, then inspect the subfloor and wall board. If the floor is soft or the wall board is water-damaged, we replace it with cement board and a waterproofing membrane before anything new goes in. You approve any hidden damage in writing before we continue; the price does not move without your sign-off.
Stage 3 – Plumbing and electrical rough-in (1 to 2 days). New supply lines, drain relocation, the vanity light circuit and any outlet move happen now, and the rough-in is inspected if the scope requires it. You decide then whether the vanity stays on the same wall or moves, because relocating a drain is the single biggest cost swing in the job.
Stage 4 – Tile setting and grouting (3 to 5 days). Floor tile, shower walls, the niche and the trim go in over the membrane, then cure before grout. You pick the layout, grout color and whether the tile runs floor to ceiling. Grout needs 24 hours before the fixtures hang, so we don’t rush it.
Stage 5 – Vanity, fixtures and final walkthrough (2 to 3 days). The vanity sets, the faucet and shower trim go on, the toilet resets, and we caulk and seal. We walk the room with you and list anything to touch up. Most of our jobs are completed in a single visit per stage, so the room isn’t torn up for weeks.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Vanities, Tile and Fixtures Choices You’ll Weigh
The specs you choose move the price as much as the labor does. These are the real forks in the road.
- Vanity construction: MDF versus plywood versus solid wood. MDF is the budget pick and handles a dry bathroom fine, but it swells if the shower leaks. Plywood and solid-wood cabinets cost more and survive moisture better. We lean toward plywood boxes with a moisture-resistant finish in a bathroom that gets daily showers.
- Vanity top: quartz versus granite versus porcelain. Quartz is non-porous and needs no sealing; granite is durable but wants sealing every year or two; a porcelain slab is the toughest against stains and usually the least expensive of the three.
- Floor tile: porcelain versus ceramic versus natural stone. Porcelain is denser and holds up to the traffic a hall bath gets; ceramic is cheaper and fine in a guest bath; natural stone like travertine looks great but needs sealing and a stiffer subfloor.
- Shower wall: large-format tile versus mosaic versus a tile-and-glass panel. Large-format tile means fewer grout lines to clean. Mosaic gives grip underfoot. Talk to us about slip ratings before you fall for a polished floor tile.
- Fixtures: brand and finish. A Kohler or Delta faucet in brushed nickel costs more than an off-brand chrome set, but the cartridge is replaceable years later. Cheap fixtures are the most common thing homeowners regret within two years.
We stock and specify from brands we trust across every trade, from KraftMaid vanities to Kohler and Delta fixtures, so you’re choosing quality, not whatever the supply house has on the shelf.
What Vanities, Tile & Fixtures Cost in Whittier, CA

Fixtures-and-tile-only work in Whittier runs $9,000 to $28,000. A powder room or small hall bath with a new vanity, floor tile and fixtures usually lands near the bottom. A full primary bath with floor-to-ceiling tile, a large vanity and moved plumbing sits at the top.
| Line item | Typical range |
|---|---|
| Vanity installation | $800 – $3,000 |
| Shower replacement (tile and pan) | $3,000 – $8,500 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Full bathroom remodel (all trades) | $9,000 – $28,000 |
What pushes a job to the high end: relocating the drain or supply lines (adds plumbing labor and often a permit), hidden water damage behind old tile (new subfloor and wall board), large-format or natural stone tile (more cutting and a stiffer substrate), custom vanity sizing for an odd alcove, and electrical additions like a GFCI outlet or an added vanity light circuit.
Your written estimate lists labor, materials, fixtures, permit fees and disposal separately, so the number you see is the number you pay. What usually isn’t included: structural repairs found after demo, and fixture upgrades you request mid-job. We flag those before we proceed and get your approval in writing. If it’s part of a larger scope, see our bathroom remodeling service for the full project picture.
See the difference
Before
After
Before
After
Before
AfterWhat Whittier Homes Specifically Do to This Job
Whittier is a built-out first-ring LA suburb, and most of what we touch here is an aging single-family home, not a new build. That means the work is a remodel, not a fresh install, and the surprises are in the walls. In the 1950s and 1960s tract homes across the east and south, we regularly find original galvanized supply lines and early slab or pier-and-beam floors under the old tile. A vanity that’s been leaking slowly for a decade often means rotted subfloor and stud damage, and that changes the estimate.
In the older homes around Uptown Whittier, a vanity or tile change can also bump into the city’s historic review process. If a home sits in or near the historic core along Greenleaf Avenue or Philadelphia Street, an exterior change like a window or a porch alteration may trigger design review, and off-the-shelf modern replacements don’t always pass. We plan the tile and fixture work around that timeline rather than discovering it mid-job. The hot, dry San Gabriel Valley summers and Santa Ana wind days also shape scheduling: tile setting and grout curing prefer moderate temperatures, so we time the heavy tile days around the heat. We work across the 90601, 90604, 90606 and 90612 ZIP codes, and if your project grows into a wider scope, it may be part of a full Bathroom Remodeling in Whittier.
Homeowners in Whittier often pair this bathroom work with exterior projects, too – we also handle Tile Roofing in Whittier and Specialty Roofing in Whittier when a roof is due for attention around the same time.
Serving Whittier, CA – Our Local Coverage Area
We serve Whittier and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Whittier

Most single-bathroom vanities, tile and fixture jobs take two to four weeks from demo to final walkthrough. The tile setting and grout curing alone account for three to five days, so don’t plan on a weekend turnaround. Call (888) 271-7872 and we’ll put a real schedule on paper.
If the plumbing or electrical layout moves, a permit is usually required; a straight tile and vanity swap on existing locations often isn’t. Because Whittier has older housing stock and a historic-district review in the Uptown area, we check the scope against city requirements before we start. Call (888) 271-7872 for a free on-site assessment of what your job needs.
Yes – keeping the vanity, drain and supply lines in place is the most common and most affordable path. You get new tile, a new vanity top and fresh fixtures on the same layout. Moving a drain or wall adds cost and time, and we’ll tell you up front whether it’s worth it.
It runs $9,000 to $28,000, with small hall baths near the low end and full primary baths with moved plumbing near the top. Vanity installation alone is $800 to $3,000. Call (888) 271-7872 for an exact written estimate – the on-site estimate is free.
Every job is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s stated in writing before work starts. Call (888) 271-7872 to schedule your free estimate.
Get a Free On-Site Estimate for Vanities, Tile & Fixtures in Whittier
Call (888) 271-7872 to schedule a free estimate for vanities, tile & fixtures in Whittier. We’ll walk the bathroom, measure the walls and floor, confirm what’s behind the old tile, and hand you a written line-item quote with fixed pricing. Calls are answered by a live person 24/7, and any project over $10,000 gets $1,000 off, with 0% financing for 18 months available to spread the cost.
Written by the team at Groundwork Construction Co.












