







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Hacienda Heights: What the Job Actually Involves
Vanities, tile & fixtures in Hacienda Heights runs $9,000 – $28,000 for most homes, with the vanity alone landing at $800 – $3,000 and the tile and fixture work carrying the rest. The job covers removal of the old vanity and finishes, plumbing rough-in adjustments, substrate and waterproofing, tile setting on floor and walls, and setting the new vanity top, faucet, mirror, and lighting. Timeline is usually two to three weeks of working days. Call (888) 271-7872 to schedule a free estimate.
How We Run a Vanities, Tile & Fixtures Job in Hacienda Heights

The sequence matters more than most homeowners expect. A vanity that arrives before the tile is set and the wall is patched costs you a wasted week.
Stage 1: Demo and shutoff, one to two days
We shut off water at the angle stops, drop the vanity, pull the mirror and light bar, and strip the floor and wall tile back to the studs and subfloor where the new layout needs it. This is when we discover what’s under there: rotten subfloor at the toilet flange, old galvanized supply lines, or a wall that was never properly waterproofed behind a shower surround. Any of those changes the plan, so we tell you the same day.
Stage 2: Rough-in and inspection, two to four days
If the new vanity moves or the layout changes, we relocate the drain and supplies, add a dedicated GFK circuit for the vanity lighting, and set the cement board or foam backer board. In unincorporated Hacienda Heights, plumbing and electrical rough-in gets inspected before tile goes down. That inspection call is on us, and we schedule it so you’re not waiting on a callback for two weeks.
Stage 3: Waterproofing, one day
Roll-on membrane on the floor, banded seams at every corner and penetration, and a flood test where the scope calls for it. This stage is invisible, and it’s the one that determines whether the tile job holds up in ten years. We don’t skip it to save a day.
Stage 4: Tile and vanity setting, four to six days
Floor tile goes in first, then wall tile, then the vanity cabinet, then the top, then the faucet, drain, mirror, and lights. Grout and sealant finish the job. Your decision point here is grout color, which is small but visible – pick it before we set the first tile so the batch matches.
Stage 5: Fixtures and punch, one to two days
Faucet, towel bars, mirror, exhaust fan, caulk lines, and a full walkthrough with you. We test every fixture under pressure and check for drips at each connection. You sign off when it’s right, and the work is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
The scope of the decision list is where budgets actually live. Here’s what’s on it, with the honest trade-off for each.
- Vanity cabinet: stock vs. semi-custom. A big-box stock vanity in the 30- to 48-inch range runs $300 – $900 and installs in an afternoon. Semi-custom, like the KraftMaid line we work with, runs $1,200 – $2,400 and lets you hit an odd wall dimension with a filler panel instead of a gap. Custom is $2,500+ and only worth it if the alcove is non-standard or you want a specific drawer stack.
- Vanity top: quartz vs. marble vs. porcelain slab. Quartz is the practical pick for a family bathroom – it doesn’t etch from toothpaste or hair dye and holds its factory finish. Marble looks better and stains easier; it needs sealing and a gentle cleaner. Porcelain slab is the newest option and sits between them on price.
- Floor tile: porcelain vs. ceramic vs. natural stone. Porcelain is denser, handles moisture better, and is the standard choice. Ceramic is cheaper and fine on a slab but chips more easily. Travertine and slate look great and require sealing every year or two.
- Wall tile size. Larger format (12×24 and up) reads cleaner with less grout, but the subfloor has to be dead flat or the lippage shows. Smaller tile forgives an imperfect wall and costs more in labor per square foot.
- Fixtures: finish and brand. A chrome Kohler widespread faucet is a solid workhorse; brushed nickel and matte black cost $40 – $150 more and show water spots differently. Cheap builder-grade faucets are the number one callback item we replace.
What Vanities, Tile & Fixtures Costs in Hacienda Heights, CA

The full job in Hacienda Heights runs $9,000 – $28,000. Here’s how that breaks down:
- Vanity cabinet and top: $800 – $3,000
- Floor and wall tile, including setting materials: $3,000 – $9,000 depending on square footage and tile grade
- Waterproofing and substrate prep: $800 – $2,000
- Plumbing rough-in changes: $500 – $1,800
- Electrical for vanity lighting and exhaust: $400 – $1,200
- Fixtures, mirror, and accessories: $600 – $2,500
- Permits and inspections: $300 – $800
What pushes a job to the top of the range: moving the vanity to a different wall, adding a second sink, replacing a rotten subfloor, or upgrading to natural stone. A straightforward replacement of the vanity and floor tile on the existing layout sits closer to $9,000 – $14,000.
Your written estimate includes labor, materials, permits, and haul-away. What it does not include unless you ask: upgraded tile above the allowance, a new mirror or lighting, and drywall repair outside the bathroom. We itemize those separately so there’s no surprise invoice. Ask about our 0% financing for 18 months and $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Hacienda Heights Homes Specifically Do to This Job
Most of the housing stock we work in here is single-story and split-level ranch construction from the late 1950s through the 1970s, and that build era shows up in the walls. Along the hillside streets off Turnbull Canyon Road and the streets feeding into Colima, we regularly find original galvanized supply lines that restrict flow and shutoff valves that won’t fully close – so the first thing we check is whether the angle stops can be isolated without shutting down the whole house. In the 91745 ZIP’s tract stock, we also see old aluminum branch wiring feeding vanity outlets, which usually means an electrician has to bring that circuit up to code before we tile.
Because Hacienda Heights is unincorporated, permits run through LA County rather than a city building department, and the inspection timeline reflects that. We pull the permits, schedule the rough-in inspection, and pass it before tile goes down – so the inspection doesn’t sit between you and a finished bathroom for weeks. Santa Ana winds and the dry summer heat we get in the Puente Hills aren’t the main threat to a bathroom, but the hillside moisture in winter matters if a window or vent is leaking into the framing. Framed properly, this job lasts decades. Homeowners often pair this with Bathroom Remodeling in Hacienda Heights when the scope grows beyond the vanity and tile, or with Specialty Roofing in Hacienda Heights when they want the vent stack checked from above. If the scope reaches a full gut, Bathroom Remodeling is where the wider project gets planned, and we cover the whole of Hacienda Heights and its surrounding communities like La Puente, Valinda, Avocado Heights, and West Puente Valley.
Serving Hacienda Heights, CA – Our Local Coverage Area
We serve Hacienda Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Hacienda Heights

Two to three weeks of working days for a standard job, from demo through final walkthrough. The inspection step alone can add a few days, which is why we don’t schedule the tile until the rough-in gets signed off.
Yes, when plumbing or electrical moves or when floor tile is replaced over the subfloor in most cases. Cosmetic tile replacement on an existing surface may not require one. In Hacienda Heights, the permit comes from LA County, and we handle the application and inspection scheduling for you.
Yes, and many jobs stay right where the old vanity sat. A same-footprint replacement is faster, cheaper, and avoids the rough-in inspection, though it limits you to a vanity that fits the existing alcove dimensions.
A vanity and floor tile replacement without layout changes typically lands at $9,000 – $14,000. Full jobs with wall tile, lighting, and plumbing relocations run up to $28,000. Call (888) 271-7872 for a written line-item estimate – it’s free and itemized.
Every job is covered by our 730-Day Done Right Promise – if something isn’t right, we come back and make it right. We also pull permits and pass inspections, so the work is on record. Call for the full written terms before work starts.
Get a Free Vanities, Tile & Fixtures Estimate in Hacienda Heights
We’ll come out, measure the bathroom, look at what’s behind the existing vanity, and give you a line-item estimate with materials and labor broken out. Upfront pricing, no surprises. Call (888) 271-7872 for a free on-site estimate and design consult for vanities, tile & fixtures in Hacienda Heights – a live person answers, day or night. Whether you’re ready to schedule or just pricing the job, that call costs you nothing.
Written by the team at Groundwork Construction Co.












