







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in La Puente: What It Actually Involves
A tub-to-shower conversion in La Puente usually runs $3,500 to $10,000 and takes about 5 to 10 working days from demo to final inspection. The job means pulling the tub, capping or rerouting the drain, waterproofing the wet wall, setting a new pan and tile or a factory shower system, and getting it inspected if the scope is structural or plumbing-heavy. Call (888) 271-7872 for a free on-site estimate. Most homes on these compact mid-century lots sit inside that range comfortably.
How We Run a Conversion from First Cut to Final Walkthrough

The sequence matters more than the sales pitch, so here’s the actual order of work and what you decide at each step.
Stage 1: Walkthrough and written line-item scope (day 0)
We measure the existing alcove, check the drain location and valve height, and look at what’s behind the tub surround. This is where you decide shower-only versus a shower with a built-in bench, which affects the pan size and the tile count. You get a written quote with the number you’ll actually pay, not a range that drifts.
Stage 2: Demo and substrate inspection (day 1)
The tub comes out, along with the old surround and any drywall that’s failed. On La Puente’s 1950s-60s stock, this is where we most often find water damage behind the valve wall or a galvanized stub that’s near the end of its life. You approve any add before we keep going. If the drain needs relocating, that happens here, not later.
Stage 3: Rough plumbing and waterproofing (days 2-3)
We set the new drain, valve trim rough-in, and cement board or a bonded waterproof membrane depending on the system you picked. If a permit applies, this is the rough-in inspection point. You decide tile layout, niche placement, and whether you want a bench or a curbless entry. Curbless costs more because the floor framing and pan have to be built to slope correctly.
Stage 4: Tile, pan, and finish (days 3-6)
Tile set, grout, glass or curtain rod, fixtures, and caulk lines. This is the longest single stretch and the one you’ll want to walk at the end of each day. Grout color and sealer choice get locked here, and once the tile’s on the wall that decision’s done.
Stage 5: Final inspection and punch list (days 6-10)
If a permit was pulled, the final inspection closes it out. We walk the shower with you, test the drain flow, check the pan for ponding, and confirm the valve stops where you expect. Anything on the punch list gets fixed before final payment. That work is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right.
If the conversion is part of a full Bathroom Remodeling in La Puente, we sequence it so the shower finish happens after the vanity and flooring are set, not before.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
These aren’t upsells. They’re the real forks in a conversion, and each one moves the price and the maintenance load.
- Tile-in shower with a mud-set or foam pan: the most flexible look and the best fit for La Puente’s older alcoves, since the pan can be built to whatever odd dimension the existing tub left you. Runs $6,500-$10,000 depending on tile grade. Slower, but the finish holds up in a hot, dry climate.
- Factory shower system (acrylic or fiberglass pan and wall panels): the low end at $3,500-$5,500. Fast install, easy to clean, fewer grout lines to fail. The trade-off is fewer size options and a look that reads builder-grade, which matters if you’re planning to sell.
- Frameless glass vs. framed: frameless looks cleaner and costs more; framed holds up to more abuse. Your shower size and the glass panel width decide whether frameless is even practical.
- Curbed vs. curbless entry: curbless is the safety pick for aging-in-place, but it requires reworking the floor framing and pan slope, which pushes the job up. Worth the spend if someone in the home needs step-free access.
- Drain location: keeping the existing drain saves money. Moving it to center the shower means cutting the subfloor and re-running the trap, which adds labor and a permit line.
- Valve and trim: swapping the valve while the wall is open costs little; doing it later means opening the tile. Kohler and similar pressure-balance valves are the common choice here.
What Tub-to-Shower Conversion Costs in La Puente, CA

Plan on $3,500 to $10,000 for the conversion itself. A modest alcove swap with a factory pan and basic tile lands near $4,000. A full tile-in shower with a relocated drain, frameless glass, and quality fixtures can reach the top of that range.
The variables that push a job up or down:
- Size and layout: a standard 5-foot alcove is cheapest; a wider shower that requires moving the drain adds several hundred dollars.
- Existing condition: rotted framing, failed galvanized stubs, or a wall that isn’t plumb all add time and materials once the wall opens.
- Relocating plumbing or electrical: new drain location, moved valve wall, or added lighting means more rough-in and inspection time.
- Material grade: porcelain versus natural stone, and the tile pattern you choose, swing the material line by thousands.
- Permit scope: a cosmetic swap may not need one; a plumbing or structural change likely does, and that adds a fee and an inspection stop.
A written estimate here includes demo, waterproofing, the pan, tile or panel system, fixtures, and cleanup. It does not usually include a new valve if you didn’t ask for one, glass upgrade beyond the base, or hidden rot we couldn’t see until demo. Those are quoted as written add-ons before we continue, with no change-order surprises. Upfront pricing, no surprises is the whole point of putting it in writing.
See the difference
Before
After
Before
After
Before
AfterWhat La Puente Homes Specifically Do to This Job
La Puente is a densely built, mostly Latino working-class suburb, and nearly all the bathroom work we see is homeowner-driven remodel on small lots, not tract development. That means we’re working inside a built-out city with mature trees, mid-century tract homes, and a permitting culture where homeowner referrals and clear Spanish-language communication carry as much weight as the build. The housing stock is dominated by post-WWII tract homes and small stucco houses on compact lots, and many of those homes still have older electrical panels and galvanized plumbing.
That combination shows up in a shower conversion: the valve wall is often the first place a failing galvanized stub announces itself, and the original electrical panel may not support a new exhaust fan without a subpanel conversation. On the older streets near the Puente Hills, we also routinely uncover informal garage conversions and unpermitted prior work, so before we can pull a legal remodel on the bath, we sometimes have to resolve what’s already there.
We cover the full La Puente area including the 91744 and 91746 ZIP codes, and we’re set up for the whole-house scope too – our Bathroom Remodeling service covers the wider project when a shower swap turns into a full bath redo. Homeowners often pair this with exterior work while we’re on site, and we also handle Metal Roofing in La Puente and Tile Roofing in La Puente if the roof is due.
Serving La Puente, CA – Our Local Coverage Area
We serve La Puente and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in La Puente

Most conversions take 5 to 10 working days, with the tile-in version at the longer end and a factory panel system closer to 5. The permit inspection stop, if one applies, can add a few days depending on scheduling. Call (888) 271-7872 and we’ll give you a realistic timeline for your address.
If the job moves the drain, relocates the valve wall, or changes the floor structure, it likely needs a permit – a straight fixture swap with no plumbing change usually doesn’t. We confirm the exact scope with the city before we start and pull the permit if it’s required. Call us to talk through your specific layout.
Yes, in most cases. Keeping the existing drain location and valve wall is the standard, lower-cost path, and it’s what we do on the majority of La Puente alcove swaps. Moving either one is what drives the job up. Call (888) 271-7872 for a free estimate and we’ll tell you which path your bath allows.
The range is $3,500 to $10,000, with a typical alcove job landing in the middle. Drain location, trim package, glass, and hidden damage are what move it. Call (888) 271-7872 for a free on-site estimate – the number you see is the number you pay.
Every conversion is covered by our 730-Day Done Right Promise – if it isn’t done right within that window, we make it right. That’s on top of the manufacturer warranty on fixtures and the tile system. Call (888) 271-7872 to schedule your free estimate and see the written terms.
Schedule Your Free Tub-to-Shower Conversion Estimate
We’ll come out to your La Puente home, measure the alcove, check the drain and valve, and hand you a written line-item estimate before you commit to anything. A live person answers the phone 24/7, so call (888) 271-7872 whenever it’s convenient. Estimates are free, there’s no pressure, and 0% financing for 18 months plus $1,000 off projects over $10,000 is available if the project grows.
Written by the team at Groundwork Construction Co.












