







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Monrovia: What It Takes and What It Costs
A wrought iron fence in Monrovia usually runs $3,500 to $9,000 installed, depending on linear footage, height, and whether you need gates. Most residential runs go in over two to four days once the panels are fabricated, and a driveway gate adds another week to the schedule. Call (888) 271-7872 and we’ll walk your property line, measure the actual footage, and put a written line-item estimate in your hands. Iron fence work here means tight lots and foothill property lines more than wide-open subdivisions, so the measurement stage matters.
How We Build an Iron Fence Here, Start to Finish

Iron fence installation isn’t a single visit in most of Monrovia’s older neighborhoods, because access, soil, and existing walls all shape the sequence. Here’s the real order of operations.
1. Site walk and property-line confirmation (day 1, about an hour)
We meet you on site, confirm the run, and check where the fence meets your neighbor’s line, your house wall, and any existing retaining wall or concrete. In the flat grid near Old Town, lots are narrow and the side-yard clearances are tight, so we measure against the lot line rather than guessing. You’ll decide the run length and gate placement at this stage.
2. Layout, permits, and material selection (day 2 to 2 weeks, depending)
We stake the layout and pull the permit if your run or height triggers one. A fence under six feet of finished height set back from the property line often skips the permit; a taller privacy run, a fence at the line, or a corner lot can require review. You’ll choose the iron grade, picket spacing, and finish here. This is the stage where the job either stays simple or grows, so it’s worth the two-week lead on a permit if you’re on a corner lot.
3. Removal and concrete prep (day 1 of build)
Old wood, chain link, or a failing iron run comes out first, along with footings that no longer hold. We haul debris the same day. On hillside lots above the ‘L’ street line, prep often includes checking the slope where posts will bear, because a post set into loose fill won’t stay plumb through a wet winter.
4. Panel and gate fabrication, then install (2 to 3 days)
Fabricated iron panels arrive and set into cured footings. Posts go in first and cure, then panels hang, then hinges and latches go on. A gate adds a day because the leaf has to swing true and latch cleanly. You approve picket spacing and gate swing direction before this stage, because changing it after fabrication means a new leaf.
5. Final walk and warranty handoff (same day as completion)
We walk the run with you, check every post for plumb, test the gate, and hand over your written warranty. Touch-up on any weld or finish mar happens on this visit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Shape an Iron Fence in Monrovia
Iron fence isn’t one product. What you pick drives both the price and how it ages in the foothill air. Here are the real options.
- Genuine wrought iron vs. tubular steel: Wrought iron is heavier, thicker, and resists bending; it suits a long run you plan to keep decades. Tubular steel is lighter on cost and works well for a shorter run that only needs the look and the security.
- Finish: A powder coat holds color and fights rust better in Monrovia’s dry-then-wet foothill cycles than a plain painted finish. A hand-applied acrylic or enamel costs less up front but needs touch-ups after a few hard winters. Powder coat usually wins for longevity.
- Picket spacing: Tighter spacing (under 4 inches) closes the visual gap and reads more secure; wider spacing keeps the yard open and less imposing. Spacing tighter than 4 inches also matters if a child or pet can slip between pickets.
- Height: A 4-foot run at the front yard is common and often skips permitting. Six feet is the practical max for a residential privacy run before review kicks in, and a corner lot at six feet is where the permit conversation starts.
- Gates: A pedestrian gate with a self-closing hinge and a driveway gate are separate decisions. A drive gate with automation costs meaningfully more than a fixed leaf, and if you want it tied to a rolling-code remote, that’s a spec decision to make before fabrication.
- Mounting: In-ground post footings are the norm. A wall-mount where the fence meets your house wall keeps the run tight on narrow lots, and that matters on the old bungalow side yards.
What an Iron Fence Costs in Monrovia, CA

For a typical residential run in Monrovia, expect $3,500 to $9,000 installed. Most jobs land in the middle. What pushes a job toward the top of that range:
- Linear footage: A 60-foot front run versus a 150-foot perimeter around three sides is the single biggest driver. Footage times per-foot material and labor is the base number.
- A gate: A pedestrian gate adds a modest amount; a full driveway gate with automation can add several thousand on its own.
- Grade and finish: Tubular steel with a basic finish versus heavy wrought iron with powder coat is a material swing of a few thousand over a long run.
- Site prep and access: Removing an old fence, cutting into a concrete slab, or hauling debris off a tight lot adds labor. On hillside lots with slope, post engineering adds time.
- Permits: A permit and inspection adds a line item and a delay, but it protects you at resale.
A written estimate from us lists footage, per-foot rate, gates, finish, removal, and permit line items separately, so you can see where the money goes. What it won’t include: landscaping restoration if the fence line cuts through plantings, and any retaining wall work, which is its own scope. Upfront pricing, no surprises is the standard we hold to. Call (888) 271-7872 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Monrovia Homes Specifically Do to This Job
Monrovia’s housing stock splits sharply, and that split shapes iron fence work here. The flat grid near Old Town (91016 and 91017) is full of 1920s Craftsman and Spanish Colonial bungalows on narrow lots, where a fence has to thread between the house wall and the property line with a few feet to spare. Side-yard clearances there are tight enough that a wider picket spacing or a wall-mounted run often makes more sense than an in-ground post line. Up in the foothills above the ‘L’ street line, lots climb into the San Gabriel Mountains, and a fence that runs along a slope needs posts engineered for that slope, not a flat-lot layout copied over. The Old Town and Myrtle Avenue core also carries design-review and historic-preservation constraints that most neighboring SGV cities don’t enforce as strictly, so a fence visible from the street there can require a different review path than the same fence in Duarte or Baldwin Park. And with the long dry season followed by intense atmospheric-river storms, iron posts and footings see real movement, which is why we check slope and soil before setting footings rather than after. That’s how we cover Monrovia on fence work.
The Fence in the Wider Project
An iron fence rarely lives alone in Monrovia. If it’s part of a full Fence Installation in Monrovia project, we plan the run together with the rest so the lines match. Homeowners often pair a new fence with Patios, Walkways & Pool Decks in Monrovia, or with ADU Design & Permitting in Monrovia when a new unit changes where the gate needs to land. Where a new structure or prefab option like a Boxabl or Mighty Buildings unit is planned, the fence run and gate placement get mapped on the same drawing. You can see how our Fence Installation service fits together before you commit.
Serving Monrovia, CA – Our Local Coverage Area
We serve Monrovia and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Iron Fence in Monrovia
Most residential iron fence runs take two to four days of on-site build time, plus fabrication lead time of about one to two weeks. If a permit is required, add two weeks or more for review. A gate adds a day. Call (888) 271-7872 and we’ll give you a real timeline for your property.
Often not, if the run stays under six feet of finished height and sits back from the property line. A taller privacy run, a fence at the line, or a corner lot can require review. We confirm the requirement for your address during the site walk. Call (888) 271-7872 for a free estimate.
Yes. An iron fence is a surface and footing job, not a structural one. We set posts in the ground or mount to your house wall and existing hardscape, so no plumbing or structural work is involved. The exception is if the fence line runs over a buried line, which we check on site. Call (888) 271-7872 to schedule your walk-through.
Plan on roughly $60 to $100 per linear foot installed, which lands a typical residential run in the $3,500 to $9,000 range. Tighter picket spacing, powder coat, and a gate push the per-foot number up. Call (888) 271-7872 for an exact quote, with the line items written out.
Every iron fence we install is covered by the 730-Day Done Right Promise. If a weld fails or the work isn’t right, we make it right. The finish carries its manufacturer’s warranty on top of that. Call (888) 271-7872 to get the warranty terms in writing before you sign.
Get a Free Iron Fence Estimate in Monrovia

We’ll come out to your property, measure the run, and hand you a written estimate with every line item spelled out. You’ll know the footage, the per-foot rate, the gate cost, and the permit status before you commit. Call (888) 271-7872 to schedule your free estimate for an iron fence in Monrovia. Most estimates are scheduled within a few days.
Written by the team at Groundwork Construction Co.












