







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Citrus, CA: What the Job Really Involves
Custom and geometric windows in Citrus usually mean shaped or non-standard units – arches, half-rounds, trapezoids, triangles, angled corner glazing – made to fit an existing opening or a new one, and a typical single-opening project runs two to four weeks from measure to final trim. Budget for the job itself and you’re looking at roughly $4,500 to $15,000 for a practical multi-window package, or $8,000 to $25,000 when you’re ordering true custom geometry with impact-rated glass and finished interiors. Call (888) 271-7872 for a free on-site estimate and a written line-item quote.
How We Build a Geometric Window Project, Stage by Stage

Every shaped window lives or dies on the template. That’s the part people don’t see, and it’s the part that costs the most when it goes wrong.
Day 1 – site measure and templating. We open up the wall or take precise measurements of the rough opening, check the framing for square and plumb, and confirm the shape will actually read the way you pictured it from inside the room. On older Citrus homes this is also where we find the surprises: a header that was never sized for a wide arch, or stucco over original 1950s framing that has moved. You decide the shape and the sill height here. This step takes two to three hours on site.
Days 2-5 – order and shop drawings. The manufacturer produces shop drawings for your approval. You sign off on radius, muntin layout, glass package and finish color. Nothing gets built until that signature. Expect three to five business days for the drawing set, longer for complex multi-unit assemblies.
Weeks 2-3 – fabrication. Lead time for true custom geometry runs four to eight weeks depending on shape complexity, glass type and finish. Standard arches inside a stock series move faster. We give you the confirmed date in writing before you commit.
Install day – demo, frame, set, seal. We pull the old unit, repair any rot or damaged framing, set the new window, shim and level it, flash and seal the exterior, then insulate the gap. A single opening is a one-day job; a full room of shaped units runs two to three days. You decide how much interior trim work you want us to finish versus leave for your painter.
Final walkthrough and inspection sign-off. We check operation, water-tightness at the flashing, and finish quality, then close out any permit inspection. County building review governs most of the work here, and we handle that paperwork so you’re not chasing it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
- Frame material – vinyl vs. wood vs. aluminum-clad. Vinyl is the value play and holds up fine in dry heat, but geometric shapes in vinyl are more limited and the profiles are bulkier. Wood gives you any radius you can draw and the cleanest sightlines, and it needs repainting every few years. Aluminum-clad wood is the middle path: wood interior, weather-resistant exterior, and the widest shape range. It costs more upfront and it’s the choice most Citrus homeowners make for a focal-point window.
- Glass package. Dual-pane low-E with argon is the baseline and matches the fire-safe, heat-rejecting needs of a foothill home. Tempered glass is required for any unit near a door or close to the floor. Impact-rated laminated glass costs more but earns its keep against Santa Ana debris.
- Shape complexity. A half-round transom costs far less than a trapezoid or a multi-panel eyebrow. Every additional radius or angle adds fabrication time. Honest trade-off: pick one hero shape per room and keep the rest rectangular – you’ll spend less and the room reads better.
- Finish and trim. Factory finish is durable and touch-up-friendly. Site-painted trim lets you match existing interior molding but needs a re-coat down the road. You decide.
- Brand. We work with proven manufacturers on this side of the business, and while our window portfolio leans on Andersen and Marvin, a shaped-window order is quoted by series and glass build, not by name on a brochure.
What Custom & Geometric Windows Cost in Citrus, CA

Start with the number: $4,500 to $15,000 is the realistic band for a geometric window package on a typical Citrus home, moving toward $25,000 when you add impact glass, multiple shaped units, and finished interiors. Here’s what pushes a job high or low.
| Line item | Typical range |
|---|---|
| Single geometric unit, installed | $1,800 – $5,500 |
| Room group (3-5 shaped + rectangular) | $4,500 – $15,000 |
| Impact-rated custom package | $8,000 – $25,000 |
| Framing / header repair | $400 – $2,000 |
| Interior trim and finish | $300 – $1,500 |
The variables that move the number: shape complexity (every radius adds fabrication time); opening condition (damaged framing, rot, or out-of-square walls from an original 1950s build add labor); glass package (impact and tempered cost more); structural changes (enlarging the opening to fit a bigger arch means a new header and a structural review); and permit scope (a like-for-like replacement is simpler than a structural enlargement).
A written estimate from us lists the window unit, glass spec, install labor, flashing and sealing, trim scope, permit cost, and debris removal – line by line. What it doesn’t include: painting or staining after install, exterior stucco patching beyond the immediate opening, and any landscaping repair. We tell you that upfront so there’s no surprise invoice.
See the difference
Before
After
Before
After
Before
AfterWhat Citrus Homes Specifically Do to This Job
Citrus is a small, unincorporated community wedged against the San Gabriel Mountains in the 91702 ZIP, and that shows up in the work. There’s no city building department here – county building review governs, and that means slope and drainage requirements along with defensible-space standards that differ from what a contractor handles in Azusa proper or Glendora. Many of these homes sit on sloped or terraced lots, so a shaped window opening often means checking how the wall was framed against the grade before we cut.
The housing stock is a mix of post-war 1950s-60s ranch and stucco tract homes with scattered custom foothill residences. Single-pane original windows are common, and the aging electrical and plumbing that come with that era are the usual reasons a window project turns into a bigger scope. Hot, dry summers and Santa Ana wind events make this a high fire-risk edge, so glazing that resists debris and ember exposure matters more here than in the flat valley. If the window work is part of a larger exterior plan, homeowners often pair this with Concrete Driveways & Concrete Work in Citrus or Asphalt Driveways & Resurfacing in Citrus. It’s a window project, but it’s a window project on a foothill lot.
Serving Citrus, CA – Our Local Coverage Area
We serve Citrus and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Citrus

Count on two to four weeks for a single opening from measure to final trim, driven mostly by the four-to-eight-week fabrication lead on shaped units, which overlaps the install schedule. Call (888) 271-7872 and we’ll give you a written timeline against your specific window.
A like-for-like replacement usually doesn’t require a permit, but a structural enlargement or a new opening does, and county building review governs most of the work here. We pull the permit and handle inspection so it’s not on your plate.
Often yes – many geometric windows fit an existing opening with minimal framing work. When the shape requires a new header or a wider cut, we tell you before the work starts and price it in writing, not after.
Most packages land between $4,500 and $15,000, moving toward $25,000 on impact-rated multi-unit jobs. Call (888) 271-7872 for an exact quote – estimates are free and line-item.
Every project is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right – on top of the manufacturer’s warranty on the window unit itself. Ask about it on the call.
Get a Free Estimate for Custom & Geometric Windows in Citrus
Call (888) 271-7872 to schedule a free on-site estimate for custom & geometric windows in Citrus. A live person answers, day or night, and we’ll walk your opening, talk through shape, glass and finish, and leave you with a written line-item quote and a real timeline. No deposit to get a number. This is part of our Windows & Doors service, and if it grows into a full exterior scope, see Windows & Doors in Citrus. We serve the whole Citrus area.
Written by the team at Groundwork Construction Co.












