







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in South San Jose Hills, CA: What the Job Actually Involves
Replacing a bathroom vanity, floor and wall tile, and the fixtures that go with them usually runs $10,620 – $33,040 in South San Jose Hills, and most of that range is decided by tile grade and whether plumbing or electrical has to move. A straight swap of a 36-inch vanity, new floor tile over sound substrate, and a fresh faucet, mirror and light typically takes 4 to 7 working days once materials are on site. Call (888) 271-7872 to book a free estimate; we’ll walk the room, measure, and put a line-item number in writing.
How We Run a Vanities, Tile & Fixtures Job, Stage by Stage

This isn’t a fog-of-war process. You’ll know what happens each day and what we need from you before we start.
Stage 1: Walkthrough, Measurements, and Material Decisions (Day 0, about 90 minutes)
We measure the vanity alcove, check that the existing shutoff valves actually hold, and look at the subfloor and wall substrate. This is where you pick tile format and grout, vanity width and depth, and whether the mirror gets replaced. Decisions made here keep the rest of the schedule from stalling. If you’re weighing this against a larger scope, it’s often part of a full Bathroom Remodeling in South San Jose Hills project rather than a standalone swap.
Stage 2: Protection and Demo (Days 1 – 2)
Floors and adjacent rooms get covered, the water gets shut off and tagged, and out comes the old vanity, toilet if it’s moving, tile and backer. On a 1960s-era South San Jose Hills ranch house this is also where we find out whether the wall behind the tile is drywall or mud-set mortar bed. Mortar-bed walls add a day of demo and hauling; they’re common in homes built before about 1975.
Stage 3: Rough-In and Substrate (Days 3 – 4)
If the vanity is relocating, the drain and supply lines move now, and so does the vanity light circuit if the mirror changes size. Then comes backer board or a waterproofing membrane, taped and sealed at every seam and corner. Nothing gets tiled until that membrane passes our own inspection. Skipping that step is how showers and wet walls fail in three years instead of twenty.
Stage 4: Tile Setting and Grouting (Days 4 – 6)
Floor tile goes down first, then walls, then grout and caulk at every change of plane. Large-format tile (24×48 and up) needs a flatter substrate and more careful layout, which is why we ask about tile size at the walkthrough. Grout gets 24 hours before any water touches it.
Stage 5: Vanity Set, Fixtures, and Final Walkthrough (Days 6 – 7)
The vanity cabinet goes in level and shimmed, the top is set, then the faucet, drain, mirror, light, towel bars and any accessories. We run the water, check for leaks under the cabinet, and walk the room with you. Punch items get written down and scheduled. Every job is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make on a Vanities, Tile & Fixtures Job
Most of the budget swings happen here, not in labor. These are the real forks in the road:
- Vanity type: A freestanding stock vanity in the $945 – $1,800 installed range suits a standard 30 – 48 inch alcove and installs in a day. A built-in or furniture-style vanity with a furniture-grade cabinet line like KraftMaid costs more and needs a scribed fit to the wall, which matters in older South San Jose Hills homes where walls are rarely plumb.
- Countertop material: Quartz is the default now and holds up to daily use without sealing. Natural stone looks richer but needs periodic sealing. Laminate is the budget option and shows wear at the front edge first.
- Tile format and grade: Porcelain is denser and more chip-resistant than ceramic. Large-format porcelain costs more in labor because the substrate has to be flatter. Mosaic on the floor means more grout lines to keep clean but more grip underfoot.
- Fixtures: A standard ceramic-cartridge faucet from a brand like Kohler is the sensible middle. Cheap big-box faucets fail at the cartridge in a few years. A quality faucet and drain set adds maybe a few hundred dollars and saves a callback.
- Grout: Cementitious grout is cheaper and needs sealing. Epoxy grout costs more but resists staining and doesn’t need sealing, which is worth the upgrade in a house with kids or hard water.
What Vanities, Tile & Fixtures Cost in South San Jose Hills, CA

For a single bathroom, expect $10,620 – $33,040 all-in for vanity, tile and fixtures. Here’s how that breaks down:
- Vanity installation: $945 – $3,540, depending on cabinet size, type and whether plumbing moves.
- Tile work: Floor and wall tile pricing scales with square footage and format; large-format and mosaic both cost more in labor than standard 12×24.
- Fixtures: Faucet, drain, mirror, light and accessories, priced by grade.
Five things push a job toward the high end: relocating the drain or supply lines, moving the vanity light circuit, discovering a failed subfloor or water damage under old tile, choosing large-format or natural stone, and a permit that covers plumbing or electrical changes. A written estimate from us lists materials, labor, permit fees and what’s excluded. It doesn’t include hidden change orders; the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat South San Jose Hills Homes Specifically Do to This Job
South San Jose Hills (ZIP 91792) is one of the last unincorporated pockets of LA County, and that shapes this work. Hillside lots of a half-acre to two-plus acres, many still zoned for horses, mean long private driveways and multi-level terrain, so material delivery and haul-away take longer than on a flat suburban street. The housing stock is dominated by 1960s – 1980s ranch-style and custom homes on sloped parcels, and many still have original galvanized plumbing and older electrical panels. That matters directly: a 1960s galvanized supply line feeding a vanity often won’t survive being disturbed, so we check pressure and flow before we promise a simple swap. Recent large additions and ADU conversions on graded hillsides also mean we sometimes walk into a bathroom where the framing and grading were done to a different standard than the original house. Permits go through LA County rather than a city building department here, and inspection scheduling runs on county timelines, not next-day. It’s why we build the permit window into the schedule instead of discovering it mid-job.
Serving South San Jose Hills, CA – Our Local Coverage Area
We serve South San Jose Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in South San Jose Hills

Most single-bathroom jobs take 4 to 7 working days once materials are on site, with larger or plumbing-relocation jobs running 8 to 10. Add time if we’re waiting on a county permit for plumbing or electrical changes, and add a day if we find mortar-bed walls or a failed subfloor at demo.
You don’t need a permit for a straight swap of a vanity, tile or fixtures in the same location. You do need one when plumbing or electrical lines are relocated, or when the scope crosses into structural work, and here that means an LA County permit rather than a city one. We pull the permit and handle the inspection; you don’t have to chase it.
Yes, and that’s how most of these jobs go. If the vanity stays in the same footprint and the toilet doesn’t move, we skip the rough-in stage entirely, which saves both time and money. If you want a wider vanity or a different layout, that’s when plumbing relocation enters the picture.
It runs $10,620 – $33,040 for a full single-bathroom job covering vanity, floor and wall tile, and fixtures, with the spread coming from material grade and how much plumbing or electrical moves. A smaller scope, like a vanity and floor tile only, lands well under that. Call (888) 271-7872 for an exact quote; estimates are free.
Every job carries our 730-Day Done Right Promise, which covers workmanship for two full years. If something we installed isn’t right, we come back and make it right. Material warranties from brands like Kohler pass through to you separately.
Get a Free Estimate for Vanities, Tile & Fixtures in South San Jose Hills
Call (888) 271-7872 and a live person answers, day or night. We’ll set a time to walk your bathroom, measure, and talk through tile and vanity options that fit your budget. You get a written, line-item estimate with no surprises, and if you’re weighing a bigger scope, our Bathroom Remodeling service covers it. We serve homeowners across South San Jose Hills, and many pair this work with Tile Roofing in South San Jose Hills or Specialty Roofing in South San Jose Hills while crews are already on site.
Written by the team at Groundwork Construction Co.












