







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Citrus, CA: What the Job Actually Costs and How Long It Takes
Paver driveway installation in Citrus runs $7,000 to $18,000 for a typical two-car apron, and most jobs are finished in 4 to 7 working days once materials land on site. The work means tearing out the old surface, rebuilding a compacted base sized for your soil and slope, then setting pavers on that base with edge restraint and joint sand. Call (888) 271-7872 for a free on-site estimate before anything is ordered.
How we build a paver driveway, stage by stage

Paver driveways live or die on the base. The pavers are the visible part, but what sits under them decides whether the surface stays flat through ten winters of runoff or starts heaving in year three. Here’s the real sequence, with the decisions you’ll be making along the way.
Day 1: site walk, layout, and demo
We mark the edges, confirm the slope away from the garage, and cut out the old concrete, asphalt, or dirt. On a Citrus lot with any grade, this is also where drainage gets settled: where water leaves the driveway, whether a channel drain or a slight crown does the work. Demo on a typical 400-square-foot apron takes a day. You decide the edge line and the drainage exit point before we cut.
Days 2 – 3: excavation and base
We excavate 8 to 12 inches depending on your soil and the loads the driveway will carry, then lay geotextile fabric and compact the aggregate base in 2-inch lifts with a plate compactor. Each lift gets watered and re-compacted. This stage runs a day and a half to two days and is where most of the labor lives. Skimping here is the number one reason paver driveways fail, so we don’t.
Day 3 – 4: bedding sand and paver setting
A 1-inch bedding layer of coarse sand goes down, screeded flat, then pavers are laid in your chosen pattern. Herringbone holds up best on a driveway because interlocking distributes tire loads; running bond looks cleaner but shifts more under turning wheels. A crew sets 300 to 500 square feet a day, so a two-car driveway takes one to two days. You confirm the pattern and the color blend before the first pallet opens.
Day 5: edge restraint, cuts, and joint sand
We set edge restraint on the sides that don’t butt against a wall or curb, make the cuts around the garage apron and any curve, then sweep polymeric joint sand into the gaps and compact the whole field. Polymeric sand sets firm and resists washout and weeds better than plain sand. This stage is a day and is where the driveway starts looking finished.
Day 6 – 7: cure, cleanup, and walkthrough
The joint sand needs to cure, and we do a final pass on the surface, wash down, and walk the job with you. You get the written scope and the 730-Day Done Right Promise in hand at the walkthrough. If anything settles or a paver rocks, we come back and fix it. That’s the point of a two-year guarantee on a job that should last decades.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Most of the decisions on a paver driveway come down to four things. Here’s the honest trade-off on each.
- Paver material: Concrete pavers are the workhorse, running $3 to $8 per square foot installed, and hold color well in the San Gabriel Valley sun. Clay brick pavers cost more and wear beautifully but crack if the base shifts. Natural stone is the premium option and looks the part, at the highest price.
- Pattern: Herringbone is the strongest choice for a driveway and handles turning tires best. Running bond and basketweave look cleaner and cost similar but shift more over time under vehicle loads.
- Color and blend: A single solid color reads sharp and modern. Multi-color blends hide tire marks and staining better. Belgard and other quality manufacturers offer tumbled, chamfered, and smooth finishes, and the finish affects how much dirt the surface traps.
- Edge and drainage details: Concrete edge restraint, a channel drain, or a permeable joint system with open-graded base. On a sloped Citrus lot, drainage is not optional; it’s the difference between a driveway and a swimming pool.
Permeable paver systems cost 10 to 20 percent more than a standard base and are worth it where water pools or where the slope pushes runoff toward a neighbor.
What Paver Driveways cost in Citrus, CA

Plan for $7,000 to $18,000 on a standard residential paver driveway in Citrus. Here’s what moves the number:
- Square footage: A single-car apron at 250 square feet sits near the bottom of the range; a wide two-car driveway with a turnaround pushes toward the top.
- Existing surface and demo: Breaking out old concrete adds cost over an existing dirt or gravel surface. Thick, reinforced slabs take longer to remove.
- Base depth and soil: Foothill lots with clay or graded fill need a deeper base and more compaction, adding to the total. Flat, stable ground keeps it low.
- Paver grade and pattern: Premium stone and complex patterns cost more in both materials and labor.
- Drainage and grading: A channel drain, slope correction, or retaining edge on a hillside lot adds line items.
Your written estimate itemizes demo, base, pavers, edge restraint, joint sand, and drainage, with the total on the page. No-hassle upfront pricing means the number you see is the number you pay. Work that isn’t in the written scope isn’t work you’ll be billed for later without a conversation first.
See the difference
Before
After
Before
After
Before
AfterWhat Citrus homes specifically do to this job
Citrus sits in the 91702 ZIP, wedged against the San Gabriel Mountains, and that foothill position changes the permitting and the build. Most of the community is unincorporated, so county building review governs your project rather than a city counter. If your driveway touches a slope, drainage, or the fire interface, that review looks at defensible space and erosion control, not just the paver surface. The 1950s and 1960s ranch and stucco tract homes here often have old flatwork and settled slabs, so demo runs into surprises, and sloped or terraced lots mean the base and drainage plan gets more attention than on flat-valley driveways in Azusa proper. Santa Ana wind events and winter rains on graded slopes make proper drainage and edge restraint essential; a driveway that pools or erodes isn’t done. We’ve seen paver driveways on Citrus foothill streets fail early because the base wasn’t compacted in lifts or the water had nowhere to go.
Serving Citrus, CA – Our Local Coverage Area
We serve Citrus and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked questions about Paver Driveways in Citrus

Most paver driveways in Citrus take 4 to 7 working days from demo to walkthrough. A small single-car apron can finish in 4; a large driveway with slope work, drainage, or a complex pattern runs closer to 7. Weather and county review timing are the two things that can stretch it.
Often yes, especially when the work involves slope, drainage alteration, or the fire interface, because Citrus is unincorporated and county review applies. We handle the permitting and inspections as part of the job, and the written estimate lists the permit scope so there are no surprises. A flat, like-for-like surface swap may not trigger review; we’ll tell you which situation you’re in.
Sometimes, but usually not well. A paver driveway needs a properly compacted base, and layering over old concrete or cracked asphalt traps moisture and leads to settling. We’ll assess your existing surface honestly; if it can serve as a stable base, we’ll say so, and if it can’t, we’ll explain why removal is part of a good job.
No. Our written estimate is fixed for the scope on the page. If we open the ground and find something genuinely different (buried utilities, unstable fill, a failed sub-base), we stop and talk to you before any change, with a written revision. You won’t get a surprise invoice.
Every paver driveway we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right for two full years. If a paver settles, rocks, or the drainage fails, we come back. Paver driveways are also often part of a larger project; if you’re reworking the whole front approach, that’s part of a full Driveway & Pavers in Citrus scope, and many homeowners pair this with ADU Design & Permitting in Citrus or a Garage Conversion ADU in Citrus when the frontage is being reworked at the same time.
Get a free on-site estimate for paver driveways in Citrus
Call (888) 271-7872 to schedule a free on-site estimate for paver driveways in Citrus. A live person answers around the clock. We’ll walk the driveway, check the base and drainage, and hand you a written line-item quote on the spot. That’s our Driveway & Pavers service done the way it should be: transparent pricing, quality materials, and a guarantee that actually means something. Estimates are free; financing and current offers are explained on the call.
Written by the team at Groundwork Construction Co.












