







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Duarte: What to Expect
Concrete Driveways & Concrete Work in Duarte runs $4,500 – $12,000 for a standard residential driveway pour, and a full tear-out and replacement lands at $5,000 – $14,000. Most jobs take 3 to 5 working days from demo to drive-on, plus a 7-day cure before you park on it. The range is wide because Duarte’s hillside parcels and older valley-floor lots fail in different ways. Call (888) 271-7872 for a free on-site estimate with a written line-item quote.
What a Duarte Concrete Pour Actually Looks Like, Stage by Stage

Concrete is not a single-day trade, and anybody who tells you otherwise is cutting corners. Here’s the real sequence we follow on a Duarte driveway, with honest durations at each step.
Stage 1: Site Walk and Layout (Day 1, about an hour)
We measure the existing slab, check the slope away from the garage, and confirm where the driveway meets the apron and the street. You decide the finish and the width here, because a 2-foot bump in width or a switch from broom to exposed aggregate changes the number. We flag any root intrusion, utility stub, or drain line running under the slab before anything gets torn out.
Stage 2: Demo and Haul-Off (Day 1 into Day 2)
Jackhammer and skid-steer work breaks up the old slab and pulls the base material out. On a 20-by-20 driveway that’s 6 to 8 tons of debris heading to a licensed facility. If you have an old redwood or ash tree with roots heaving the slab, this is when we cut and grind the roots back and treat the subgrade. Hillside lots in the 91008 area often take an extra half-day because hauling out of a slope is slower.
Stage 3: Subgrade Prep and Forming (Day 2 into Day 3)
We compact the subgrade to the required density, then set forms to your chosen width and grade so water runs to the street or a proper drain, never toward the garage. This is the stage the inspector cares about most. We lay a compacted base, set the reinforcement, and confirm depth at the edges where a slab is most likely to crack. You’ll see the finished form and grade before any concrete shows up.
Stage 4: Pour, Finish, and Control Joints (Day 3)
The truck arrives, we place the mix at the agreed depth with the agreed psi, and finish to the texture you picked. We cut control joints on a grid (typically every 8 to 10 feet) so the slab cracks where we want it to, not where it wants to. In Duarte’s summer heat we often pour earlier in the morning to keep the mix from setting too fast in the sun.
Stage 5: Cure and Walk-Through (Days 3 through 10)
Concrete reaches usable strength over about 7 days and full design strength at 28. We keep traffic off for 7 days, then walk the finished job with you, check the joints and edges, and hand over the written warranty. The 730-Day Done Right Promise covers the workmanship: if a joint pops or a finish fails, we make it right. That’s the end of the sequence, and every stage has a decision point you sign off on.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Concrete Choices That Actually Change the Job
Concrete is not one product. What you pick here drives both the look and the price, so it pays to know the trade-offs before you sign.
- Standard broom finish – the most common choice and the most affordable. Great grip in wet weather, hides minor surface marks, easy to maintain. Suits active driveways where function beats flair.
- Exposed aggregate – a textured, speckled surface with better traction than broom. Costs more and can feel rougher underfoot, but it hides stains well and looks custom. Popular on the foothill lots where the driveway is a first impression.
- Concrete mix strength (psi) – a 3,000-psi mix is standard for a residential driveway; a heavier mix costs more but holds up better to heat cycling and heavier vehicles. On Duarte’s hot summer pavement we lean toward the stronger spec.
- Reinforcement choice – wire mesh versus rebar. Rebar adds cost and labor but resists cracking better, especially on slabs over 4 inches thick or with heavy loads. For a driveway you plan to keep, it’s usually worth it.
- Slab thickness – a 4-inch slab handles cars; a 5- or 6-inch slab handles trucks, RVs, and heavier loads. Thicker costs more in both material and haul-off but won’t rut under heavy use.
- Color and stamping – integral color and a stamped pattern cost more and need sealing, but give a custom look. Integrally colored concrete holds up better than a surface stain.
Whichever you choose, the subgrade and joints matter more than the finish. A beautiful top on a bad base cracks anyway.
What Concrete Driveways & Concrete Work Costs in Duarte, CA

Most Duarte driveways land in the $4,500 – $12,000 range, with full replacement at $5,000 – $14,000 when the old slab has to come out. Here’s the line-item view so you can see where the money goes.
| Item | Typical Duarte range |
|---|---|
| New concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement (demo + pour) | $5,000 – $14,000 |
| Finishing upgrades (exposed aggregate, color) | adds to base pour |
| Reinforcement upgrade (rebar over mesh) | adds to base pour |
Five things push a Duarte job toward the low or high end:
- Square footage and shape – a straight 400-square-foot driveway is far simpler than a curved, 900-square-foot one with an apron.
- Existing condition – a poured-over slab with roots and soft spots means more demo, more haul-off, more base work.
- Access and slope – a hillside 91008 lot with tight equipment access takes longer to haul out of and form around.
- Material grade – psi, thickness, reinforcement, and finish all move the number.
- Permit scope – a structural or grading-related pour triggers more review than a flat slab on grade.
Your written estimate lists what’s included: base prep, reinforcement, pour, control joints, haul-off. It also states what isn’t: drainage tie-ins to a sewer line, retaining walls, or landscaping work. No change orders unless you ask for one. Financing is 0% for 18 months, and projects over $10,000 get $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Duarte Homes Specifically Do to a Concrete Pour
Duarte’s housing stock splits into two jobs. On the valley floor in 91010, we’re pouring next to 1950s and 60s tract ranches where original concrete, root heaved slabs, and shallow utility lines are routine. Up in the Bradbury-adjacent 91008 foothills, we’re dealing with custom hillside parcels where slope, drainage, and brush-clearance drive the whole design. That second category is where Duarte differs from flatland neighbors like Monrovia or Baldwin Park: a hillside pour has to account for runoff off the San Gabriels and defensible-space rules that a flat lot never triggers. Hot, dry summers and Santa Ana wind off the mountains mean we pour in the morning and account for faster cure. The parent page for Driveway & Pavers in Duarte covers the broader scope if you’re widening the project to landscaping or a patio, and our Driveway & Pavers service handles the full range.
Concrete isn’t the only project Duarte homeowners pair with exterior work. Folks converting a detached garage often pair this with Garage Conversion ADU in Duarte, which needs a new approach and apron poured to the right grade. Others adding a backyard unit pair it with New Detached ADU in Duarte and want the driveway extended at the same time. We cover all of Duarte, from the valley floor up into the foothills.
Serving Duarte, CA – Our Local Coverage Area
We serve Duarte and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Duarte

A standard driveway takes 3 to 5 working days from demo to drive-on, then 7 days of no traffic to cure. Hillside lots and larger pours can stretch the demo stage by a day. Call (888) 271-7872 and we’ll give you a real timeline for your specific address.
In most cases a standard residential driveway on grade does not need a building permit, but a hillside pour with grading, a retaining wall, or a structural change may trigger review. We confirm what applies to your lot before we start, and we pull and pass anything that needs inspecting. Call us to sort out your specific address.
Almost always, yes. A driveway pour sits above the utilities in most cases, so we form around drains and stubs rather than moving them. When a utility line or tree root forces a change, we tell you before any concrete shows up. Call for a free on-site look.
New installation runs $4,500 – $12,000, and a full replacement runs $5,000 – $14,000 depending on size, condition, and finish. The written estimate breaks out demo, base, pour, and finishing line by line. Call (888) 271-7872 for an exact quote, free.
Every concrete job is backed by our 730-Day Done Right Promise. If a joint fails, a finish cracks, or a slab settles, we make it right within that window. Work is done by background-checked, uniformed technicians. Call for the written warranty details.
Get a Free Concrete Estimate in Duarte
A new driveway is a big pour, and you should see the plan and the number before you commit. Call (888) 271-7872 for a free on-site estimate on Concrete Driveways & Concrete Work in Duarte. We’ll walk the site, check the grade and base, and hand you a written line-item quote with no surprises. A live person answers, 24/7.
Written by the team at Groundwork Construction Co..












