







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterTub-to-Shower Conversion in El Monte, CA
A tub-to-shower conversion in El Monte typically costs between $4,500 and $12,000 when you remove an old tub and build a walk-in shower in its footprint, and most projects wrap in 3 to 7 working days. We handle the whole scope: demo, waterproofing, tile, glass, valve, and drain. If you’re stepping over a 14-inch tub wall every morning and thinking about the day you can’t, this is the project that changes your daily routine without gutting the whole room.
The housing stock in El Monte makes this conversion more common than you’d guess. A lot of the homes around downtown and along the Valley Boulevard corridor went up between the 1940s and 1960s, and the original 5-foot alcove tubs in those bathrooms are now 60 to 80 years old. Porcelain is chipped and stained. The cast iron underneath is heavy and rusting at the drain. Tile surrounds are cracked and the grout has been patched more times than anyone remembers. Replacing the tub with a walk-in shower uses the same rough opening, keeps your existing plumbing wall, and gives you a bathroom that works for how people actually live now. That’s the sweet spot for this work: you get a full shower remodel inside the footprint you already have, without the cost and mess of a full layout change.
Groundwork Construction Co. of El Monte does this work as part of our broader bathroom remodeling service, and a tub-to-shower conversion is one of the most requested jobs we run here. You’ll get a live person when you call (888) 271-7872, upfront pricing before a single tile comes off the wall, and our 730-Day Done Right Promise covering the workmanship for two full years. If it’s not done right, we make it right. That’s the whole deal.
We also bring a curated set of material partners to the table so you’re choosing from names you recognize instead of whatever the supply house had in stock. Kohler valves and showerheads. Cambria quartz for a bench seat or a niche surround where the budget allows. Tile and glass from brands we’ve installed hundreds of times across the San Gabriel Valley. You pick from real options; we tell you straight what each one costs and how long it lasts.

Key Takeaways
- A tub-to-shower conversion in El Monte runs $4,500 to $12,000 for most homes, and most jobs finish in 3 to 7 working days.
- The job reuses your existing alcove footprint and plumbing wall, so it costs far less than a full bathroom gut. See our Bathroom Remodeling in El Monte page for the full-remodel scope.
- Older El Monte homes built before 1970 often have cast iron drains and shutoff valves that need replacement once the wall is open. We price that upfront, not as a surprise change order.
- Every project is covered by our 730-Day Done Right Promise, and estimates are free.
When You Need Tub-to-Shower Conversion
Tub-to-shower work is usually triggered by one of a handful of situations. If any of these sound familiar, it’s worth a conversation.
- Someone in the house can’t safely step over the tub wall anymore. A 14 to 17-inch tub apron is a real trip and fall hazard for aging parents, anyone recovering from knee or hip surgery, or a family member using a walker. Converting to a curbless or low-threshold walk-in shower means the bathroom stays usable and independent.
- The tub is failing underneath you. Cast iron tubs from the 1950s and 60s are common in the bungalows and post-war tract homes off Elliott Avenue and around El Monte Park. Once the enamel wears through at the drain, the iron rusts, and the tub starts flexing when you stand in it. That’s a structural failure, not a cosmetic one, and no amount of tub refinishing fixes it.
- The tile surround is cracked and the grout keeps crumbling. In El Monte’s dry summer heat and cooler winter nights, tile and grout expand and contract. Old walls without a modern waterproofing membrane let moisture behind the tile, and that shows up as loose tile, dark grout lines, and eventually mold at the base of the wall. A conversion lets us rebuild the wet wall correctly on the way in.
- Nobody in the house takes baths. A tub you never use is 15 square feet of floor space doing nothing. A walk-in shower with a glass panel and a bench gives that space back. It reads bigger, brighter, and cleaner.
- You’re planning ahead for resale. A walk-in shower is one of the features buyers ask about in El Monte bathrooms, especially in the single-story homes that attract older buyers and multigenerational households. A clean, modern shower with a low threshold is a selling point. Ask us and we’ll tell you exactly what we’d fix first if you’re listing within two years.
- The old tub sits in a cramped hall bath. Converting the hall bath tub to a shower often makes the room feel larger because you lose the tub apron and gain floor space at the entry. That matters more in El Monte’s smaller mid-century bathrooms than it does in a newer, larger house.

Our Tub-to-Shower Conversion Process
Here’s how a job runs from first call to final walkthrough. Every step is yours to see – you’ll know what’s happening and what’s next.
- Free estimate and design consult. We measure the alcove, check the drain location, look at the shutoff valves and the subfloor, and photograph everything. You choose tile, shower valve, glass, and any bench or niche. We give you a written, upfront price for the whole scope. No vague “plus materials” line, no hourly surprises. That’s the free estimate and design consult we run for every job.
- Demo and inspection. We protect the rest of the house, shut off water, and pull the tub. This is where we find out what’s actually behind the wall. In El Monte homes this often means old cast iron drain lines, a failing valve, or framing that needs a little repair. If something needs to be added, we tell you before touching it and the price changes only if you approve it.
- Rough-in and waterproofing. New valve, new drain and pan, new subfloor where needed. Then we build the shower base, slope it to the drain, and apply a bonded waterproofing membrane over the entire wet area. This is the step most failed showers skip, and it’s why we don’t cut corners on it. Tile is only as good as what’s behind it.
- Tile, glass, and trim. We set the tile, grout it, seal it, and install the showerhead, valve trim, and glass enclosure. You’ll get a curbless or low-threshold entry if the framing allows, or a low 2 to 4-inch curb if it doesn’t. We’ll tell you which before you commit.
- Final walkthrough. We test the valve for temperature and pressure, check the drain for a proper slope, clean up, and walk you through the finished shower and the care instructions. Then the 730-Day Done Right Promise kicks in for the workmanship. If something’s wrong in the next two years, we come back and make it right.
One safety note worth stating plainly: this is a wet-wall and water-line job, not a weekend DIY project. The old tub is heavy (a 60-year-old cast iron tub can weigh 300 to 400 pounds) and pulling it wrong can damage the framing or the floor beneath it. Shutoff valves and supply lines behind the wall are pressurized and often seized on older homes. Get a trained, insured crew to handle demo and plumbing. We’re happy to tell you what to look for so you can ask good questions of whoever you hire, even if it’s not us.
Tub-to-Shower Conversion Pricing in El Monte
Tub-to-shower conversion in El Monte runs $4,500 to $12,000 for most single-bathroom projects, with the typical job landing around $7,000 to $9,000. The range is wide because the tile, glass, and what we find behind the wall move the number more than the shower itself. Everything below is a real range you can budget against.
| Line Item | Typical Range | What It Covers |
|---|---|---|
| Demo & tub removal | $400 – $800 | Protection, tub pull, haul-away, wall prep |
| Valve & drain rough-in | $600 – $1,400 | New shower valve, drain, pan, supply lines |
| Shower base & waterproofing | $800 – $1,800 | Sloped pan, bonded membrane, flood test |
| Tile & installation | $1,500 – $4,500 | Wall and floor tile, grout, seal, niche/bench |
| Glass enclosure | $900 – $2,500 | Frameless or semi-frameless door and panel |
| Plumbing fixtures | $300 – $900 | Showerhead, valve trim, controls |
| Disposal & cleanup | $150 – $400 | Debris haul-away, final clean |
What moves the price up or down in El Monte specifically:
- What’s behind the wall. Replacing a corroded galvanized or cast iron drain adds $400 to $1,200 on many older homes. A seized shutoff valve is a small add. A rotted subfloor from years of slow leakage is a bigger one. We check this in the estimate, so you’re not guessing.
- Curbless vs. curbed. A curbless roll-in shower costs more because it means recessing the floor and reworking the drain, sometimes adding $1,000 to $2,500. If someone in the house uses a walker or wheelchair, it’s worth every dollar.
- Tile selection. Porcelain from a mid-grade line keeps you closer to the low end. Large-format tile, natural stone, or a mosaic feature wall pushes toward the high end. We’ll show you the difference in person.
- Glass. A framed semi-frameless door is the budget choice. Frameless 3/8-inch glass with a custom cut is the premium end. Both are in the table above.
- Bench, niche, and fixtures. A built-in bench, a recessed niche for shampoo, and a nicer showerhead all add cost, and all of them add function. We’ll price each one so you can pick what matters.
Every estimate we give is upfront and written. The number you see is the number you pay unless you approve a change, and you’ll approve it in writing before we touch anything. We also offer 0% financing for 18 months, and $1,000 off projects over $10,000, which can put a premium conversion within reach without stretching the monthly budget. For a broader set of numbers on full bathroom work, our Bathroom Remodeling page lays out the full-remodel cost picture.
Why Homeowners in El Monte Choose Groundwork Construction Co.
We’ve been in business since 2014 and proudly serve local communities across our markets. Our technicians have up to 12 years of experience, and they arrive background-checked and in uniform on every project. Calls are answered by a live person 24 hours a day, 7 days a week, so you’re never stuck in a voicemail until Monday morning when a leak is running through a ceiling.
What tends to win the job here: transparent pricing, a real person on the phone, and a two-year workmanship promise in writing. The 730-Day Done Right Promise is one of the longest workmanship guarantees in the residential construction space, and it covers every conversion we run. If something fails because of how we built it, we come back and fix it at our cost.
We also treat your home like it has to stay livable during the work. That means floor protection, containment where dust can travel, daily cleanup, and a crew that shows up when we said they would. Most of the tub-to-shower conversions we run in El Monte finish in 3 to 7 working days, and you’ll know the schedule before we start.
Scheduling Your Conversion
If you’re ready to move forward, we start with a free estimate and design consult. We’ll measure your alcove, look at what’s behind the wall, and give you a real price. That first appointment is the whole point of a good contractor relationship – you learn what you’re actually getting, and we learn what the job really needs.
We run conversions all over the area and schedule around what’s in the house. Call (888) 271-7872 when you’re ready, and a live person will get you on the calendar.
FAQs – Tub-to-Shower Conversion
How much does a tub-to-shower conversion cost in El Monte?
Most tub-to-shower conversions in El Monte cost between $4,500 and $12,000, with the typical project landing around $7,000 to $9,000. What moves the number most is what’s behind the wall (old cast iron drains and seized valves are common in El Monte homes), whether you go curbless, and the tile and glass you choose. We give a written, upfront price in the estimate, and the number you see is the number you pay unless you approve a change. Call (888) 271-7872 for an exact quote – estimates are free.
Can you convert my tub to a shower in the same footprint without moving the plumbing?
Yes. In most homes we build the new shower inside the original tub alcove, which means the existing plumbing wall and drain location stay put. That’s a big part of why a conversion costs far less than a full bathroom gut. On older El Monte homes we always check the drain, the shutoff valves, and the subfloor during the estimate, because those are the parts most likely to need replacement once the wall is open. Call us and we’ll tell you what we expect to find in your house before the price is final.
How long does a tub-to-shower conversion take?
Most of our tub-to-shower conversions take 3 to 7 working days from demo to final walkthrough. The day count depends on the size of the shower, tile selection, and whether anything behind the wall needs repair. Waterproofing gets the time it needs regardless, because a shower that’s rushed on the wet wall will fail. We give you a schedule up front and we tell you the day the shower is usable.
Is a tub-to-shower conversion worth it for resale in El Monte?
A well-built walk-in shower is a strong selling point in El Monte, especially in single-story homes that attract older buyers and multigenerational families. It removes a step-over hazard, opens up a small bathroom, and reads as modern in listing photos. It doesn’t automatically add more dollars than it costs to every house, but a clean, correctly waterproofed shower with a low threshold is one of the features buyers ask about. Ask us during the estimate and we’ll tell you what to fix first if you’re planning to sell within a couple of years.
One last thing on the safety front: if the old tub is cast iron or the plumbing behind the wall is original to a 1950s or 60s home, leave the demo and the water-line work to a licensed, insured crew. We’ve seen homeowners hurt by a cast iron tub shift and water damage from a seized valve that broke during a DIY pull. If you’re unsure, call us and we’ll walk you through what to check before anything is touched.
Across every market we work in, from Bathroom Remodeling to roofing and windows and doors, the standard is the same: a real person on the phone, a written price, background-checked uniformed technicians, and a 730-Day Done Right Promise covering the work. That’s what a home construction partner should look like. For your El Monte bathroom, call (888) 271-7872 for a free estimate and design consult today.
Written by the team at Groundwork Construction Co. of El Monte, serving El Monte.


