







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in La Puente, CA
Walk-in showers & shower remodeling in La Puente typically run $9,000 – $28,000, with a curbless walk-in installation alone landing around $4,500 – $12,000 depending on size, tile, glass, and whether plumbing has to move. Most jobs take two to three weeks of working days once the permit is pulled and materials are on site. Call (888) 271-7872 for a free on-site estimate and a written, line-item price you can compare against any other bid.
What a walk-in shower project actually looks like, start to finish

This is a build, not a swap. Even a “simple” shower replacement opens a wall and a floor, and what’s behind them decides the schedule. Here’s the real sequence so you know what to expect on day one versus day ten.
Stage 1: Walkthrough, measurements, and the plan
We measure the existing stall or tub alcove, note where the drain sits, check the valve and supply lines, and confirm whether the wall framing can take a bench or niche. This is where you decide the footprint and glass layout, because moving the drain or adding a curbless entry is a plumbing-and-framing decision, not a tile choice. Expect this visit to run 60 to 90 minutes. You leave with a written scope and price.
Stage 2: Permits, demolition, and rough-in (days 1 – 3)
For a typical La Puente job we pull the permit before the first hammer swing, then demo the old surround, valve, and pan down to studs and subfloor. We inspect for rot, old galvanized lines, and past water damage. Days two and three are the rough-in: new drain and pan liner or a prefab waterproof system, valve replacement, blocking for grab bars, and pressure testing. The rough inspection is what slows things down here, because scheduled inspections set the calendar, not us. You’ll confirm fixture locations and waterproofing method before the walls close.
Stage 3: Waterproofing and tile (days 4 – 9)
This is the stage homeowners underestimate. We build the sloped mortar bed or set the foam pan, coat the walls with a bonded waterproof membrane, and let it cure fully before any tile goes up. Setting large-format tile on a shower wall takes longer than a backsplash does. You’ll pick grout color and tile layout during this window.
Stage 4: Glass and fixtures (days 10 – 13)
Frameless glass is templated after tile is finished, not before, which adds a lead time of roughly five to ten business days on custom panels. A stocked semi-frameless kit moves faster. Faucet, showerhead, drain cover, and any bench or shelving go in here.
Stage 5: Final inspection and walkthrough
The inspector signs off on the waterproofing and plumbing, we water-test everything, clean up, and walk the job with you. You’ll get the written 730-Day Done Right Promise at the end of every project.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Most of the decision fatigue on a La Puente shower remodel comes from three questions: how watertight, how big, and how much glass. Here’s what each choice costs you in dollars and in upkeep.
- Tile versus acrylic or solid-surface panels. Tile gives you design freedom and lasts far longer, but grout needs sealing and large-format tile adds labor. Acrylic is cheaper up front and wipes clean fast, though it can flex or yellow on an older floor with any movement.
- Curbless versus low curb versus standard curb. A curbless entry means recessing the floor or adding a linear drain, which usually adds $2,000 – $4,000 and is where a permit really matters. A low curb is the compromise that keeps most of the safety benefit.
- Frameless glass versus semi-frameless. Frameless looks better and is easier to clean, but a custom panel adds $1,500 – $3,000 and a lead time over a framed kit.
- Ready-made pan versus mortar bed. A prefab pan (Kohler and similar brands make solid ones) installs faster and is predictable. A custom mortar bed fits odd dimensions on old La Puente tract bathrooms, at the cost of a day of labor.
- Bench, niche, and grab bars. Bench and storage niche each add labor and waterproofing detail. Grab bars cost little, and we recommend blocking for them now even if you aren’t installing them yet.
What walk-in showers & shower remodeling costs in La Puente, CA
Full shower remodeling in La Puente lands in the $9,000 – $28,000 range. A focused walk-in shower install sits at $4,500 – $12,000, and a straightforward shower replacement runs $3,000 – $8,500. The five things that push a job toward the high end are size, existing condition, whether plumbing moves, tile and glass grade, and permit scope. Moving the drain or relocating the valve, opening up a load-bearing wall, or discovering galvanized pipe or termite damage behind the old surround all push the number up. So does large-format tile with a framed pattern, or a custom glass order. A written estimate from us lists demo, rough-in, waterproofing, tile, glass, fixture, permit, and cleanup line by line. What it won’t include is anything we find buried behind a wall after demo; on a mid-century La Puente house that’s a real possibility, and we flag the range before we start rather than surprising you mid-job. No-hassle upfront pricing: the number you see is the number you pay, and any change gets approved in writing first.
See the difference
Before
After
Before
After
Before
AfterWhat La Puente homes specifically do to this job
The La Puente housing stock is mostly post-WWII mid-century tract homes and small stucco single-family houses on compact lots, and that shapes the work in ways a new-construction shower never sees. Behind the shower wall in these homes, we routinely find old galvanized supply lines that need replacing while the wall is open, undersized electrical panels, and drain lines that weren’t sized for a modern pressure-balanced valve. On streets cut into the Puente Hills, we also uncover unpermitted work from earlier remodels, because garages and additions have sometimes been converted informally here; that has to be sorted before a legal shower remodel can be permitted. The city’s permitting culture is tight and built-out, and homeowner referrals and Spanish-language communication move the process as much as the drawings do. We handle plan submittals and inspections so you don’t have to chase the building department. The San Gabriel Valley’s hot, dry summers mean the shower runs hard and the moisture load is real, which is why we don’t shortcut waterproofing. If that scope grows into a full bath overhaul, it fits under our Bathroom Remodeling in La Puente work, and if the exterior needs attention while we’re at it, homeowners often pair this with Roof Replacement & Installation in La Puente or durable Metal Roofing in La Puente.
Serving La Puente, CA – Our Local Coverage Area
We serve La Puente and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Walk-In Showers & Shower Remodeling in La Puente

Two to three working weeks from demo to final inspection on a typical job; a simple shower replacement can go faster, and a full custom walk-in with a curbless entry and large-format tile can stretch to four. The two biggest schedule variables are the inspection calendar and custom glass lead time. Call (888) 271-7872 for a schedule matched to your job.
Yes, if plumbing or waterproofing changes, which nearly every shower remodel involves. Any time a drain moves, a valve is replaced, or a pan liner or membrane is installed, that’s permitted work. We pull the permit and manage the inspections as part of the job. For an exact scope on your La Puente home, call (888) 271-7872.
Often yes, especially if the new shower occupies the same footprint as the old tub or stall. Keeping the drain and valve where they are is the cheapest path and stays at the low end of the $4,500 – $12,000 walk-in range. Changing to a curbless layout or shifting the drain is where cost climbs. Call us and we’ll tell you which yours is before you commit.
A walk-in shower install runs $4,500 – $12,000, and a full shower remodel runs $9,000 – $28,000. Position in that range depends mostly on tile and glass, curbless versus curbed, and what’s found behind the wall. Call (888) 271-7872 for a free estimate and a written quote.
Every project is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing. Call (888) 271-7872 with any warranty question before you book.
Get a free estimate on your La Puente shower
Groundwork Construction Co. of El Monte handles walk-in showers & shower remodeling across La Puente and nearby Valinda, Avocado Heights, West Puente Valley, and Hacienda Heights, along with our wider Bathroom Remodeling work. Call (888) 271-7872 for a free on-site estimate. A live person answers 24/7, and we’ll walk your shower, note what’s behind the wall, and hand you a written, line-item price before any work is scheduled. Eligible projects over $10,000 get $1,000 off, and 0% financing for 18 months keeps the budget comfortable.
Written by the team at Groundwork Construction Co.












