







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWalk-In Shower Installation in El Monte, CA
A walk-in shower installation in El Monte typically runs $3,800 to $11,500 for a full tear-out and rebuild, and most jobs finish in one to two weeks. A walk-in shower swaps the tub or curb for a low-threshold or step-free entry, which makes daily use safer and easier, especially in the older single-story homes common around El Monte. We handle the whole job: demolition, waterproofing, tile, glass, fixtures, and the plumbing that has to move to make it work.
Groundwork Construction Co. of El Monte does this work as part of a larger Bathroom Remodeling scope, so the shower gets integrated with the floor, the drain, and the venting rather than treated as a standalone swap. Too many walk-in showers leak at the curb or the wall joint within two or three years because someone skipped a proper waterproofing membrane. We don’t skip it. Call (888) 271-7872 to schedule a free estimate and design consult, and a live person picks up any hour of the day.
Our technicians have up to 12 years of experience, and every one of them is background-checked and arrives in uniform. Every walk-in shower we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it applies to the waterproofing too, not just the tile on top.
Key Takeaways
- Walk-in shower installation in El Monte runs about $3,800 to $11,500 depending on size, tile, glass, and whether the drain and plumbing have to move.
- Most jobs take one to two weeks; complex layouts with a relocated drain can run longer.
- Waterproofing is the whole ballgame. A shower that isn’t properly sealed will fail inside the walls where you can’t see it.
- We offer no-hassle upfront pricing, 0% financing for 18 months, and $1,000 off projects over $10,000.
- We choose from a curated set of top-tier material brands, so you’re picking quality, not just whatever’s in stock.

When You Need Walk-In Shower Installation
Walk-in showers solve specific problems. If you recognize your situation in this list, it’s probably time to talk about the project rather than patch the old one again.
- Someone in the house can’t step over a tub. Stepping over a high tub wall gets risky for aging parents or anyone recovering from surgery. A low-threshold or zero-threshold entry removes that hazard. In the single-story ranch homes off Peck Road and around Lambert Park, the tub-to-shower conversion is one of the most common requests we get, since the bathrooms were often built tight.
- The existing shower leaks or the tile is failing. Crumbling grout, a soft spot near the curb, or water staining on the ceiling below the bathroom are all signs the waterproofing has given out. Repairs rarely last once water has gotten behind the wall, and a rebuild is usually the cheaper long-term answer.
- The old shower is dated and cramped. If you’re looking at 1970s or 1980s tile, a prefab pan, and a showerhead at chin height, a rebuild modernizes the space and often opens it up. Glass panels instead of a curtain wall make a small El Monte bathroom feel noticeably larger.
- You want a curbless design. A zero-threshold shower that runs flush with the floor is a cleaner look and the safest option for anyone with mobility concerns. It requires the floor to be recessed or ramped, which is real plumbing and framing work, so it needs a pro.
- You’re planning to stay in the home long term. If this is your forever house, it’s worth upgrading to a shower that’s built to last decades, with material brands we stand behind. If you want to learn more about how a shower fits into a larger plan, see our guide on Bathroom Remodeling in El Monte.
- The bathroom is part of a bigger project. If you’re reworking the whole room or adding a bathroom to a new addition, a walk-in shower is easiest to design in from the start rather than retrofit later.
Our Walk-In Shower Installation Process
We run the job in a set order so nothing gets rushed and nothing gets covered up before it’s right. Here’s how it goes, start to finish.
- Free estimate and design consult. We visit, measure the space, look at the plumbing and drain, and talk through layout, tile, and glass. You get a written, upfront price before any work begins, so you know what you’re paying before we start. No surprises later. If you want to weigh this against an addition or a full rework, our page on Home Additions covers the bigger-scope options.
- Demo and inspection. We pull out the old tub or shower, open the wall where we need to, and check for hidden water damage or rot. If we find a problem, we show you before we fix it. Drywall, framing, and subfloor issues that have to be corrected are documented and priced so you decide with full information.
- Plumbing and rough-in. Drain location, valve placement, and framing for a bench or niche all get set now. Curbless designs need the floor recessed or a proper ramp, which is exactly the kind of structural detail that separates a shower that lasts from one that fails. This is the phase where a pro’s experience actually pays off, and our technicians bring up to 12 years of it.
- Waterproofing. We install a bonded waterproofing membrane over the walls and pan, sealed at every corner and penetration. This is the step most leaky showers skipped. We don’t cover it up until it’s done right, and it’s backed by our 730-Day Done Right Promise.
- Tile and finish work. We set the tile on floor and walls, cut and fit the niche, and grout and seal. We pick from a curated set of quality material brands, so the tile, the pan, and the fixtures are chosen for durability, not just whatever’s cheapest to order.
- Glass, fixtures, and final walkthrough. Frameless or framed glass goes in, the showerhead and valve trim get installed, and we test the whole thing for drainage and seal. You walk through with us, we answer questions, and we make sure you’re happy before we call it done.
We take the same disciplined approach on every trade. You can see how it carries into other projects on our Kitchen Remodeling page and our Roofing page.

Walk-In Shower Installation Pricing in El Monte
Walk-in shower installation in El Monte generally falls between $3,800 and $11,500. The wide range comes down to three things: the size of the shower, the materials you choose, and how much plumbing has to move. Below is a line-item look at how the cost breaks down.
| Item | Typical Range |
|---|---|
| Basic tub-to-shower conversion (prefab pan, standard tile) | $3,800 – $6,000 |
| Custom tile shower (tiled floor and walls, built-in niche) | $6,000 – $9,000 |
| Curbless / zero-threshold with floor recessing or ramp | $8,000 – $11,500 |
| Frameless glass enclosure (per panel) | $900 – $2,500 |
| Relocated drain or plumbing rough-in | $600 – $1,800 |
| Water damage or framing repair (if found) | $400 – $2,000 |
| Built-in bench or niche | $350 – $1,200 |
What pushes a job toward the high end is almost always labor, not materials. Moving the drain, going curbless, or discovering rot behind the old tile adds time and structural work. Choosing a frameless glass enclosure or a larger-format tile raises material cost. Picking a standard layout and keeping the plumbing where it is keeps you in the lower range.
We give you a written, upfront price before work starts: the number you see is the number you pay, unless you approve a change in writing. To make a bigger rework easier on the budget, we offer 0% financing for 18 months and $1,000 off projects over $10,000. Call (888) 271-7872 for a free estimate and design consult; estimates don’t cost you anything.
FAQs – Walk-In Shower Installation
How much does walk-in shower installation cost in El Monte?
Walk-in shower installation in El Monte generally costs between $3,800 and $11,500 for a full tear-out and rebuild. A straightforward tub-to-shower conversion with a prefab pan sits at the low end, while a custom curbless tile shower with frameless glass lands near the upper end. Call (888) 271-7872 for an exact quote, and your estimate is free.
Can you install a walk-in shower in one day?
No, not for a real tile shower. A proper walk-in shower takes roughly one to two weeks because waterproofing, tile curing, and grout all need time, and rushing those steps is how showers fail. Prefab one-day conversions exist, but they’re a different product with a shorter lifespan. We’ll tell you honestly which fits your goal and what the realistic timeline is. Call us to talk through your project.
Do I need a permit for a walk-in shower in El Monte?
In most cases, yes. Changing plumbing or the shower’s footprint typically requires a permit through the City of El Monte, and inspections happen at specific stages, including the waterproofing. We handle permits and schedule inspections as part of the job, so you aren’t left chasing the city. Call (888) 271-7872 and we’ll walk you through what your specific project needs.
Is a walk-in shower better than a tub?
It depends on how you use the bathroom. A walk-in shower is safer to step into, easier to clean, and uses less water than filling a tub. It’s the better choice for aging-in-place goals or anyone with mobility concerns. A tub still makes sense if you have young kids or genuinely take baths. If it’s a toss-up, we’ll walk you through the trade-offs during your free consult.
What brands do you use for shower materials?
We work from a curated set of top-tier material brands rather than whatever’s in stock, so tile, glass, and fixtures get chosen for durability. That matters because a shower is a wet environment that takes a beating. We won’t recommend a product we don’t trust to hold up behind our 730-Day Done Right Promise. Ask us about specific brands when you call.
Will you protect the rest of my home during the work?
Yes. We use floor protection and dust containment so the rest of your home stays livable during the project, and we remove debris daily. Background-checked, uniformed technicians work on your job, so you know who’s in your home. It’s a small thing that makes a big difference over a two-week project.
If your shower has been leaking, your tub has become a step you dread, or you’re ready to modernize a dated bathroom, we’re one call away. Groundwork Construction Co. of El Monte brings full-scope capability, from the plumbing rough-in to the final pane of glass, with upfront pricing and a 730-Day Done Right Promise on the work. Call (888) 271-7872 for a free estimate and design consult, and a live person will answer any time of day.
Written by the team at Groundwork Construction Co. of El Monte, serving El Monte.


