A Groundwork company - serving El Monte, CA
A home with a brand-new roof and gutters at golden hour
Metal Roofing · Hacienda Heights, CA

Metal Roofing in Hacienda Heights - Written Price, Workmanship Warranty

Free roof inspection with photos, then an itemized written price before anything is ordered. Installed by a licensed local professional and backed by a workmanship warranty.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in El Monte
A new clay tile roof
A newly finished roof with a ridge vent and step flashing
A second-story addition that matches the existing roofline
A new front entry door with glass sidelights
A new black aluminum pool fence with a gate
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Metal Roofing in Hacienda Heights: What It Costs and How Long It Takes

A full metal roof on a Hacienda Heights home typically runs $15,000 to $40,000 and takes three to six days on the roof once the order lands, depending on roof pitch, square footage, and whether the panels are exposed fastener or standing seam. That number covers tear-off of the old roof, new underlayment, panels, trim, and flashing. Older homes on the hillside often add fascia repair before panels go up. Call (888) 271-7872 for a free on-site estimate on your specific roofline.

Call (888) 271-7872

How a Metal Roof Goes On: Stage by Stage

A standing-seam metal roof over a covered porch

Metal roofing isn’t a single visit. Here’s the real sequence we run, and what you as the homeowner decide at each step.

Day 1: Inspection and layout

We walk the roof, measure every plane, check the sheathing under the shingles, and look at the fascia and rafters. On a 1960s ranch in Hacienda Heights, that inspection often turns up soft decking or fascia rot from years of sun damage. You’ll decide here whether to replace sheathing at $60 – $120 per sheet or patch what’s solid. This stage takes two to three hours.

Day 1 – 2: Tear-off and decking prep

Crews strip the old shingles, inspect the sheathing, and repair what the inspection flagged. For a 2,000-square-foot roof, tear-off runs four to six hours. We dump the old material and prep the deck for underlayment the same day when weather allows. You’ll want a dumpster staged on the driveway, which on a steep Hacienda Heights slope often means coordinating with the neighbors about street access.

Day 2: Underlayment and flashing

Synthetic underlayment goes down first, followed by drip edge, valley flashing, and pipe boots. This is the layer that actually keeps water out, and it’s where cut corners show up years later. Expect half a day for a typical ranch roof. No decision required from you here unless the inspection found a chimney or skylight that needs reflashing.

Day 3 – 5: Panel installation

Panels are cut, hemmed, and screwed down in sequence, starting at the eave and working up. Exposed-fastener panels go faster (two to three days). Standing seam takes three to four days because each seam is crimped or snapped with precise alignment. Length of panel and roof pitch both slow the work. This is where the look of the roof is locked in.

Day 5 – 6: Trim, ridge, and final walkthrough

Ridge caps, gable trim, and closures finish the edges. Then we do the water test, walk the whole roof with you, and hand over the written warranty. Final inspection by LA County happens after this, usually within a week or two of the walkthrough.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Choose Between

Panel type and finish drive both the cost and the look. Here’s how the trade-off plays out.

  • Exposed-fastener panels (through-screwed corrugated or ribbed): the budget option, usually $2.50 – $4 per square foot for material. Fasteners sit exposed and need re-sealing every 10 – 15 years, but they hold up in the Puente Hills wind and cost the least.
  • Standing seam panels: the premium choice, $5 – $9 per square foot material. Concealed fasteners, cleaner lines, and a lifespan that often outlasts the home. Better choice for hillside view properties where curb appeal matters.
  • Stone-coated steel: mimics tile or shake at roughly $4 – $6 per square foot. Popular on Hacienda Heights ranch homes that want the metal durability without the modern look.
  • Finish and color: standard Kynar 500 or PVDF finishes add $0.50 – $1.50 per square foot over bare galvanized. Worth it here; the summer sun and Santa Ana winds strip cheaper paints.
  • Panel gauge: 26-gauge is the residential standard. 24-gauge runs roughly 15% more in material but resists hail and wind better on exposed hillside lots.

Brand-wise, GAF and CertainTeed both make residential metal systems that pair with their underlayment and flashing components, which simplifies the warranty picture. Owens Corning’s metal options are worth a look too if you want the same brand across the roof and gutters.

What Metal Roofing Costs in Hacienda Heights, CA

Roofers installing a new roof with safety harnesses

Expect $15,000 to $40,000 for the full job on most Hacienda Heights homes. Typical line items:

  • Tear-off and disposal: $1,500 – $3,500
  • Sheathing repair: $60 – $120 per sheet if needed
  • Underlayment and flashing: $1,200 – $2,500
  • Panel material and installation: $10,000 – $28,000
  • Fascia and trim repair: $800 – $2,500
  • Permit and inspection fees: $400 – $900

What pushes a job to the high end: steep hillside pitch that needs scaffolding, more than 30 squares of roof, standing seam over exposed fastener, full fascia replacement, or a second-story section that needs fall protection. What keeps it low: a simple single-story footprint, exposed fastener, no sheathing damage, and shingles that come off clean.

A written estimate from us lists every line. It also names what’s not covered – typically painting the fascia, gutter replacement, and any structural repair that only shows up after tear-off. If the price is going to move, you hear it before we touch the roof.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Hacienda Heights Homes Specifically Do to This Job

Hacienda Heights is unincorporated, so metal roofing permits and inspections run through LA County rather than a city building department. That’s a real difference. County inspectors look hard at ice-and-water barrier on valleys, panel attachment specs in high-wind zones, and whether the sheathing meets the current nailing schedule. Getting this wrong means a re-inspection and a delay, so we pull the permit before day one.

The housing stock keeps it interesting. Most of what we roof in the 91745 ZIP is single-story and split-level ranch homes built from the late 1950s through the 1970s. Many still have shallow roof overhangs and original fascia boards that have soaked up forty-plus years of sun and winter rain. On hillside streets above the Puente Hills, that fascia is often the first thing to fail, so we budget for it. Hillside lots also mean steep driveways and retaining walls that make staging the dumpster a genuine planning task. If a roof job rolls into a broader structural repair, that’s a conversation for our Roofing in Hacienda Heights team.

The climate does most of the damage. Intense summer sun bakes the south and west-facing planes, and periodic Santa Ana winds drive grit and heat into every seam. Brush-adjacent properties want Class A fire-rated panels, which most modern metal systems already carry. Winter rains saturate the hillside soil, so proper flashing and drainage matter more than on a flat-lot house.

One more quirk worth naming: many Hacienda Heights homes have original 1960s aluminum wiring running through the attic to light fixtures and fans. If the roof work exposes that wiring, we flag it and recommend an electrician evaluate it before we close up. We’re not the electrician, but we know to look. Homeowners often pair roof work with exterior upgrades; our Window Replacement in Hacienda Heights and Impact Windows & Doors in Hacienda Heights jobs go in smoothly once the roof is finished.

For the full picture of what our Roofing division covers, or to see everything we do across Hacienda Heights, those pages lay it out.

Serving Hacienda Heights, CA – Our Local Coverage Area

We serve Hacienda Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions: Metal Roofing in Hacienda Heights

New painted shaker cabinets with an organized deep drawer

Get a Free Metal Roofing Estimate in Hacienda Heights

Call (888) 271-7872 and a live person answers any hour. We’ll set a free on-site estimate, measure the roof, inspect the fascia and sheathing, and hand you a written line-item quote for metal roofing in Hacienda Heights with a fixed price and permit fees spelled out. No change orders mid-job. Our technicians bring up to 12 years of experience, arrive in uniform, and back the work with the 730-Day Done Right Promise.

Written by the team at Groundwork Construction Co.

Why Hacienda Heights Chooses Groundwork Construction Co. of El Monte

We set the standard for metal roofing in Hacienda Heights.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Hacienda Heights

Getting your metal roofing project started is simple.

1

Call or Request a Free Estimate

Tell us about your metal roofing project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local metal roofing pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Hacienda Heights Customers Say

Trusted by homeowners across Hacienda Heights and surrounding areas.

★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan
★★★★★

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

Marco Castillo
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
An open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroomA remodeled family room with new windows and a window seatA new bay window with a cushioned seatA new wood side gate with black hardwareA new concrete driveway with a paver border

More services in Hacienda Heights

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Groundwork in El Monte

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your El Monte team

A local vetted partner works across El Monte and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise

Ready for Metal Roofing in Hacienda Heights?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Hacienda Heights.

(888) 271-7872

Request a Free Estimate in Hacienda Heights

Tell us about your metal roofing needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - 24/7 Dispatch