A Groundwork company - serving El Monte, CA
A backyard with a new horizontal privacy fence
Iron Fence · Whittier, CA

Iron Fence in Whittier - Free On-Site Quote, HOA Approval Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in El Monte
A new wood side gate with black hardware
A new white vinyl privacy fence with a double gate
A freestanding soaking tub in a remodeled primary bathroom
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
A new front entry door with glass sidelights
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Iron Fence in Whittier, CA: What It Takes and What It Costs

An iron fence in Whittier runs $3,500 to $9,000 for most residential lots, and a typical side-yard or front-yard run is measured, fabricated, and set in three to five working days. Wrought iron and welded steel are built off-site to your post spacing, then anchored to footings on install day. The number that moves most is height times total linear footage, not the finish. Call (888) 271-7872 and we’ll walk your property line with you before anything gets quoted.

Call (888) 271-7872

How a Groundwork Iron Fence Goes In, Stage by Stage

A new stained cedar privacy fence

Every iron fence job we run follows the same five beats. Here’s what actually happens and when.

Stage 1: Site walk and line marking (day 1, about an hour). We measure the run post to post, mark where each footing lands, and confirm the gate swing with you on the spot. This is where you decide the panel spacing and whether the gate hangs at the driveway or a walkway. We also check for underground lines before anything is dug.

Stage 2: Written quote with a line-item drawing (two to three days after the walk). You get footage, height, panel count, finish, gate hardware, and footing spec spelled out. Pricing is upfront, and the number you see is the number you pay. No allowance games.

Stage 3: Fabrication (roughly one to two weeks, off-site). Panels, pickets, and posts are cut and welded to your dimensions, then the finish is applied. You review the rail pattern and final color before it goes out the door. Nothing gets built twice.

Stage 4: Footings and set (days 3 to 5 of the install window). Posts are set in concrete footings and checked for plumb and height. On Whittier’s older lots this is where we find the surprises: a buried old fence footing, a tree root running the exact line the fence wants, or a grade that steps three inches across a single yard. We work around them without asking for a change order.

Stage 5: Panels, gate, and walkthrough. Panels hang, the gate gets its hardware and hinge set, and we walk the whole run with you. Your only remaining decision is touch-up on the finish and how you want the gate to latch.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Options You’ll Actually Choose Between

Iron fence isn’t one product. Three families of material and a handful of config choices make up the real decision:

  • Wrought iron: Traditional forged look, the heaviest of the three, and the finish most homeowners picture in front of a Craftsman home. It costs more per foot than steel tube and holds up for decades with a recoat every several years.
  • Welded steel with a powder coat: The middle ground for most Whittier lots. Cleaner lines, less ornamentation, and a factory finish that handles the sun better than a field-applied paint. This is what most buyers of a straightforward residential run select.
  • Aluminum that reads as iron: Lighter, cheaper, and rust-free, but it doesn’t have the weight or the sound of real iron at the gate. Worth considering if you want the look without the load on a pier-and-beam-adjacent footing.
  • Height and picket spacing: Four-foot for a front-yard border, five to six-foot for security along a side yard. Tighter picket spacing costs more per foot but closes the gap a small dog can get through.
  • Gate type: A single swing, a double drive gate, or a pedestrian gate at the walk. Hardware and hinge grade are where gate cost lives.
  • Finish and color: Standard black, a bronze or dark green, or a custom RAL match. Custom color adds both material and lead time.

Where the iron fence is part of a full Fence Installation in Whittier project across the whole property line, we plan the iron run alongside the other materials so the heights and gates line up instead of fighting each other. Our Fence Installation service covers the wider scope when you need it.

What an Iron Fence Costs in Whittier, CA

A remodeled family room with new windows and a window seat

For a residential iron fence in Whittier, expect $3,500 to $9,000. That’s the working range for a typical side-yard and front-yard run with one gate. Five factors push a job toward the top or bottom of it:

  • Linear footage: The single biggest lever. Short front-yard runs land near $3,500; a full-perimeter run with a drive gate climbs toward $9,000.
  • Height and picket density: A 4-foot border costs less per foot than a 6-foot security run, and tighter picket spacing adds labor.
  • Gate count and hardware: Each gate is its own assembly. A double drive gate with a heavy hinge set adds real money over a pedestrian gate.
  • Finish: Standard powder-coat black is the base; a custom color or a hand-applied wrought finish is extra.
  • Site conditions: Stepped grade, old buried footings, tree roots in the line, or a concrete border to demo all add time and labor.

A written estimate includes material, fabrication, footing concrete, gate hardware, and cleanup. It typically doesn’t include replacing a concrete curb the fence meets, moving irrigation or low-voltage lighting in the line, or demolition of a heavy existing fence. We call those out separately so nothing sneaks in mid-job. Homeowners often pair this work with Patios, Walkways & Pool Decks in Whittier when the same yard is getting a hardscape refresh at once.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Whittier Homes Specifically Do to an Iron Fence Job

Whittier is a largely built-out, older first-ring suburb, so an iron fence here is almost always a retrofit on an existing lot, not part of new construction. The housing stock tells the story: 1900s to 1930s Craftsman and period-revival homes around Uptown Whittier, then 1950s to 1960s tract homes across the east and south (90603, 90604, 90605). Near Uptown, and around Greenleaf and Philadelphia, exterior changes can trigger design review through the Whittier Historic Resources process, and a fence that suits a 1920s bungalow may need a specific look rather than an off-the-shelf modern panel. We plan for that review instead of being surprised by it. On the postwar tract lots, the line is usually squeezed between a detached garage and a small side yard, so footing access and equipment are tight. The eastern San Gabriel Valley sun and Santa Ana wind days also mean a powder-coat finish earns its keep better than a field-painted one. We cover Whittier and the surrounding neighborhoods, and each run gets laid out to the lot in front of it. If you’re also adding an outbuilding or living space, homeowners often pair this with ADU Design & Permitting in Whittier.

Serving Whittier, CA – Our Local Coverage Area

We serve Whittier and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked – Iron Fence in Whittier

A standing-seam metal roof over a covered porch

Get a Free Iron Fence Estimate in Whittier

Call (888) 271-7872 for a free on-site estimate on your iron fence in Whittier. A live person answers, day or night; no voicemail, no waiting until Monday. We’ll walk the line with you, measure, and hand you a written line-item quote with the price locked in and no change orders waiting in the wings. Financing and current promotions are yours to ask about on the call.

Written by the team at Groundwork Construction Co.

Why Whittier Chooses Groundwork Construction Co. of El Monte

We set the standard for iron fence in Whittier.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Whittier

Getting your iron fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your iron fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local iron fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Whittier Customers Say

Trusted by homeowners across Whittier and surrounding areas.

★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan
★★★★★

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

Marco Castillo
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new casement window over a kitchen sinkNew painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted wallsA remodeled primary bathroom with a soaking tub and walk-in showerA single-story rear room addition with tall windows and a new patioA new clay tile roof

More services in Whittier

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Groundwork in El Monte

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your El Monte team

A local vetted partner works across El Monte and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise

Ready for Iron Fence in Whittier?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Whittier.

(888) 271-7872

Request a Free Estimate in Whittier

Tell us about your iron fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - 24/7 Dispatch