







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Duarte: What the Job Actually Involves
Custom and geometric windows in Duarte run roughly $6,800 to $22,000 for a typical residential project, with most single-room feature sets landing between $9,500 and $14,000. The work takes 4 to 8 weeks start to finish: about 2 weeks for templating and fabrication, 3 to 5 days on site for installation, then stucco and finish. The price depends on shapes, glazing, and whether framing has to change. Call (888) 271-7872 for a free on-site estimate.
How We Build a Custom Window Package, Stage by Stage

The order of operations on a geometric window job matters more than it does on a standard replacement. A wrong angle at template stage costs a full refabrication. Here’s how we sequence it.
Stage 1 – Site measure and design consult (day 1, 2 to 3 hours). We measure every opening to the sixteenth, photograph existing framing, and check the wall assembly. For a trapezoid, arch, or angled bay, we take a digital template or have a field tech build a physical one. You decide the shape language here: half-round, eyebrow, quarter-arch, radius corner. Decisions you make: window style and which openings are in scope.
Stage 2 – Fabrication and permitting (weeks 1 to 2). Geometric units are made to order. Most fabricators run 10 to 15 business days. If the project changes structural framing or egress, we pull permits with the City of Duarte during this window rather than after. You decide the glazing package and the interior trim profile before the order locks.
Stage 3 – Demo and prep (days 3 to 4 on site). We protect floors and furniture, remove the old units, and inspect the rough opening for rot, cracked stucco, or water intrusion. Anything hidden gets photographed and priced before we proceed. You approve any change order before work continues.
Stage 4 – Setting and flashing (days 4 to 6). Geometric units are heavier and less forgiving than rectangles. We shim, level, and set each one, then flash and seal the perimeter. This is where 90% of long-term leaks are prevented or caused.
Stage 5 – Stucco, trim, and final inspection (days 6 to 8). Exterior patching, interior casing, and touch-up paint. If a permit was pulled, we schedule the inspection and don’t close the job until it passes.
On a tight Duarte lot, we also plan for access before day one: where the units stage, where the truck parks, and how we get a 5-foot half-round through a side yard without a crane.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Geometric Window Job
Most of the decision-making falls in three buckets: frame material, glazing, and shape method. Each choice has a real trade-off, not just a price tag.
- Vinyl frames – The most cost-effective option and a good fit for standard arches and rectangles. Limited color selection and it doesn’t hold sharp angles as cleanly as wood or aluminum-clad. Suits 1950s and 60s tract homes on the valley floor.
- Aluminum-clad wood – Our default recommendation for geometric work. Wood interior takes stain or paint; the aluminum exterior holds up in Duarte’s sun without the upkeep. Costs 25 to 40% more than vinyl and worth it if the shape is the point.
- Fiberglass – Excellent thermal stability for arched and radius units because it doesn’t expand and contract like vinyl. Good for high-exposure openings facing the Santa Ana wind corridor.
- Glazing package – Double-pane low-E is standard. Tempered glass is required for any unit within 18 inches of a floor or near a door. Laminated glass is a smart add on the fire-facing side of the house for radiant heat protection.
- Shape method – True radius and segmented arches can be built as one unit or as a radius transom over a rectangular window. Single-unit runs cleaner; a transom over a standard unit saves money and simplifies future repair.
- Trim and finish – Interior casing in wood, MDF, or PVC. Exterior trim must be noncombustible near the wildland interface, so fiber-cement or metal over wood.
What Custom & Geometric Windows Cost in Duarte, CA

The full range for this job in Duarte is $6,800 to $22,000. Below that is usually a single accent unit or a standard rectangle with an arch top. Above that means multiple geometric units, structural framing changes, or premium wood-and-clad assemblies across a whole façade.
| Scope | Typical price |
|---|---|
| Single accent unit (arch, half-round, or radius) | $1,800 – $4,200 |
| Three to five geometric units, same room | $6,800 – $12,500 |
| Full front-façade feature set with transoms | $12,000 – $22,000 |
| All custom & geometric windows, whole house | $22,000+ |
What moves a job from the low end to the high end: the number and complexity of shapes (a true radius costs more than a segmented arch), size and weight of each unit, whether framing or headers have to change, glazing upgrades, and – in Duarte’s hillside zones – whether fire-rated assemblies or ember-resistant detailing are required.
A written estimate from us is line-itemed: units, labor, flashing, trim, stucco patch, and permit fee if applicable. What it typically doesn’t include: interior painting beyond touch-up, and any structural repair found after opening the wall – that’s quoted separately and only with your approval. Upfront pricing, no surprises – the number you see is the number you pay on the scope you signed.
See the difference
Before
After
Before
After
Before
AfterHow Duarte’s Terrain and Housing Stock Shape Custom Window Work
Duarte sits where the Angeles National Forest meets suburbia, and that geography changes the window spec on hillside properties. In the 91008 foothill parcels, we work under wildland-urban interface fire standards: ember-resistant vents, noncombustible exterior trim, and glazing chosen for radiant heat exposure. Flatland contractors coming from Monrovia or Arcadia often don’t plan for these, and the inspection reflects it. The 91008 hillside lots also carry slope and drainage review that flatland jobs never trigger, so a simple window swap can require stamped plans.
On the valley floor in 91010, we’re usually retrofitting 1950s and 60s ranch and tract homes. Those walls are often older than the studs suggest: we find aluminum wiring, thin stucco, and framing that shifted in the 1971 San Fernando and 1994 Northridge quakes. Geometric windows demand a plumb, square rough opening, so we correct the framing before the unit goes in – not after. Multifamily near the City of Hope campus brings its own set of egress and fire-separation rules on shared walls. Either way, we’re covering Duarte and the surrounding foothill communities, and we can walk the site before you commit to anything. Homeowners often pair this with our Concrete Driveways & Concrete Work in Duarte when the same project also replaces a cracked walk or slab.
If the custom window work is one piece of a bigger exterior plan, it fits into a full Windows & Doors in Duarte scope – and our Windows & Doors service covers the standard openings alongside the geometry. That’s the path most of our Duarte homeowners take when they’re replacing the whole envelope at once.
Serving Duarte, CA – Our Local Coverage Area
We serve Duarte and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Duarte

Most projects run 4 to 8 weeks from signed contract to final inspection. Fabrication of geometric units drives the timeline at 10 to 15 business days, with install and finish adding another week. Winter rains and hillside access can push it a week or two – call (888) 271-7872 for a schedule estimate on your openings.
If the window is a direct replacement in the same size opening, no permit is typically required. If the project changes the opening size, adds a new opening, or alters egress, a permit through the City of Duarte is required, and we pull it. In 91008, any structural change on a hillside parcel may also trigger slope review. We handle permits as part of the written estimate.
In most cases yes. Arch-top and radius units fit into a standard rectangular opening with a filler panel at the corners, so the header stays put. The exception is a full radius bay or a window wider than the existing header can carry – those need framing changes and a structural plan. We confirm this on day one.
A single accent unit is $1,800 – $4,200; a three-to-five-unit set is $6,800 – $12,500; a full façade feature set runs $12,000 – $22,000. The number depends on shapes, glazing, and any structural or fire-code detailing required. Call (888) 271-7872 for an exact quote – estimates are free.
Every install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right – one of the longest workmanship guarantees in residential construction. Manufacturer coverage on the units themselves runs separately and varies by brand; we document it in your signed estimate. Calls are answered by a live person 24/7, so a question after install never goes to voicemail.
Get a Free On-Site Estimate for Custom & Geometric Windows in Duarte
Call (888) 271-7872 to schedule a free on-site estimate for custom and geometric windows in Duarte. We measure the openings, walk the wall assembly, and talk through shape, glazing, and fire-code considerations on your property. You get a written line-item estimate, not a verbal ballpark, plus our 730-Day Done Right Promise in writing. For qualifying projects over $10,000, we also apply $1,000 off and 0% financing for 18 months. A live person answers around the clock.
Written by the team at Groundwork Construction Co.












