







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in West Puente Valley: What It Takes and What It Costs
Concrete driveways & concrete work in West Puente Valley typically run $4,500 – $12,000 for a new driveway pour and $5,000 – $14,000 for a full replacement, with most jobs finished in 3 to 5 days once weather and cure time are counted. The work itself is fast. What slows projects down here is the permit path: West Puente Valley sits on unincorporated county land, so the paperwork goes through LA County Building & Safety, not a city hall. Got questions before you commit? Call (888) 271-7872.
How We Pour a Driveway in West Puente Valley, Stage by Stage

Concrete is unforgiving. You get one shot at the pour, and the prep work decides everything that happens in the next 30 years. Here’s the actual sequence we follow.
Stage 1: Site visit and layout (day 1)
We walk the site with you, confirm the driveway width you want, and check where water currently drains. In West Puente Valley, a lot of driveways slope toward the house instead of the street, and that’s usually the reason the old slab cracked. This visit is also where you decide the finish and whether you’re widening the approach or keeping the existing footprint. Plan on 45 to 60 minutes.
Stage 2: Demolition and haul-off (day 2)
We break out the old concrete, load it, and haul it off. A standard two-car driveway takes most of a day. If the existing slab is 6 inches thick with rebar (which we find on some of the older 1950s-era homes here), expect a longer day and a higher debris bill. You’ll see the bare subgrade by the afternoon.
Stage 3: Base prep and grading (day 3)
This is the stage that separates a driveway that lasts from one that cracks in year three. We excavate to depth, compact the subgrade, and bring in class II base rock compacted in lifts. Then we set forms and establish the fall toward the street or a drainage swale. This takes one to two days depending on how much dirt has to move. You decide nothing here except, sometimes, whether to add a channel drain.
Stage 4: Rebar, inspection, and pour (day 4)
We tie #3 or #4 rebar on a grid, then call for inspection where the county requires it. The pour itself is a half day for a typical driveway. You’ll want to be home or reachable that morning to confirm finish color and joint layout before the truck backs in. After that, nobody walks on it.
Stage 5: Cure and cut (days 5 to 8)
We cut control joints within 12 to 24 hours so the concrete cracks where we want it to, not across the middle of a panel. You can walk on it in about 24 hours, drive on it in 7 days, and put a heavy truck on it at 28 days. We come back to seal it if that’s part of your scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Concrete Options You’ll Actually Choose Between
Most of the decisions on a concrete driveway come down to four things. Here’s the honest trade-off on each.
- Standard gray broom finish ($4,500 – $12,000 for a new driveway): The workhorse. Good grip, hides tire marks, and it’s the cheapest finish per square foot. If you’re not trying to impress anyone, this is the right call.
- Exposed aggregate: More texture and a warmer look. It holds up well under the intense inland sun, though it’s harder to shovel and it collects a little more grit. Suits homeowners who want something nicer than plain gray without paying for pavers. If the wider project scope includes hardscape around the house, that’s part of a full Driveway & Pavers in West Puente Valley plan.
- Colored or integral-stained concrete: Adds a modest upcharge and gives you a uniform color that won’t fade like a surface stain. Worth it if the driveway faces the street and you care how it reads from the curb.
- Thickness and reinforcement: 4 inches with mesh is the minimum for a passenger car. 5 to 6 inches with rebar is the right spec for an RV, a work truck, or anything heavier. That thickness upgrade is usually a few hundred dollars and it’s the cheapest insurance you’ll buy on this job. If you are planning a backyard build at the same time, a driveway around the new structure is often paired with a Garage Conversion ADU in West Puente Valley, and the pour spec changes when heavier vehicles will be running over it.
If your project also includes a patio or walkway, that falls under our Driveway & Pavers service and we can quote the whole hardscape in one written estimate.
What Concrete Driveways & Concrete Work Costs in West Puente Valley, CA

Plan on $4,500 – $12,000 for a new concrete driveway and $5,000 – $14,000 for a replacement that includes demolition and haul-off. Here’s what moves a job toward the low or high end.
- Square footage: A standard two-car driveway runs about 400 to 600 square feet. Doubling width or extending to the back of the lot pushes you toward the top of the range.
- Condition of the existing slab: Thick, rebar-reinforced concrete from the 1950s and 60s is harder to break and costs more to haul. Thin, already-cracked slabs come out faster.
- Grade and drainage: A flat driveway is cheap. One that needs significant regrading, a retaining edge, or a channel drain to redirect winter runoff adds real money.
- Thickness and reinforcement: Going from 4-inch mesh to 6-inch rebar adds a few hundred dollars and is almost always worth it for a truck or RV.
- Permit scope: A straight replacement on an existing footprint is often the simplest approval. New curb cuts or a wider approach trigger more county review and more cost.
A written estimate from us includes demolition, haul-off, base prep, reinforcement, the pour, joint cutting, and cleanup. It does not include decorative overlays, sealing (which is a separate, inexpensive line item done after cure), or moving any utility lines, and we’ll flag those separately before you sign anything. The number you see is the number you pay, backed by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat West Puente Valley Homes Specifically Do to This Job
West Puente Valley is an unincorporated pocket of the San Gabriel Valley in ZIP 91746, wedged between the 60 Freeway and the Puente Hills. There’s no city hall here, so concrete work over a certain scope goes through LA County Building & Safety, not a municipal permit desk. That detail alone saves weeks, because crews used to a city counter often file in the wrong jurisdiction and lose a month waiting for a rejection. The county path is the right one, and we know it.
The housing stock shapes the work too. Most of these are 1940s to 1960s single-story stucco homes on modest lots, and many have had rooms added on over the years. When we demo a driveway, we sometimes uncover unpermitted patios, old footings, or plumbing running where a new slab would sit. Better to find that on day one than after the pour. Heat and hillside drainage matter as well. West Puente Valley summers bake a slab, and Santa Ana winds drive rain runoff down from the Puente Hills, so we grade the drive to shed water away from the foundation instead of toward it. If you’re adding a detached structure at the back of the lot, that’s often paired with a New Detached ADU in West Puente Valley, and the driveway gets sized for the access that build will need. We cover the full West Puente Valley area, from the streets off Valley Boulevard up toward the hills.
Serving West Puente Valley, CA – Our Local Coverage Area
We serve West Puente Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in West Puente Valley

Most concrete driveways & concrete work in West Puente Valley takes 3 to 5 working days from demo to final cure, plus about 7 days before you drive on it and 28 days before it reaches full strength. Weather and county inspection scheduling are the two things that can stretch that. Call (888) 271-7872 for a firm schedule on your property.
Yes, in most cases. Because West Puente Valley is unincorporated county land, the permit comes from LA County Building & Safety rather than a city, and we handle that filing for you. A simple replacement on an existing footprint is a lighter review than a new approach or widened curb cut. Ask us on the call and we’ll tell you exactly what your job needs.
Not properly. Pouring over an existing slab is called an overlay, and it fails fast when the old concrete is already cracked or settling, which is common on these older homes. The right approach is to break out the old slab, prep the base, and pour fresh. It costs more up front and far less over the long run. Call (888) 271-7872 to talk through what your slab can handle.
New concrete driveways here run $4,500 – $12,000, and full replacements run $5,000 – $14,000. Thickness, reinforcement, drainage, and permit scope are what move the number within that range. You’ll get a written line-item estimate so you can see exactly where every dollar goes. Call (888) 271-7872 and estimates are free.
Every concrete driveways & concrete work project we complete carries the 730-Day Done Right Promise, which means if it isn’t done right, we make it right for two full years. That’s one of the longest workmanship guarantees in residential construction. Our technicians bring up to 12 years of experience to the pour. Call (888) 271-7872 to schedule your free on-site estimate.
Schedule Your Free Concrete Estimate in West Puente Valley
Call (888) 271-7872 for a free on-site estimate on concrete driveways & concrete work in West Puente Valley. A live person answers around the clock, and we’ll set a time to walk your property, measure the footprint, and talk through finish and thickness before you commit to anything. You’ll get a written, line-item estimate with no surprises, and if you’re planning a bigger build we can quote related work in the same visit.
Written by the team at Groundwork Construction Co.












