







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Whittier, CA: What It Costs and How Long It Takes
A chain link fence in Whittier typically runs $3,500 to $9,000 for a standard residential yard, and most jobs are finished in one to three days once the layout is marked and utility lines are cleared. The number that matters most is linear footage: small city lots in the 90601 and 90606 ZIP codes usually land near the bottom of that range, while corner lots or standard lots that need a full perimeter push toward the top. Call (888) 271-7872 to schedule a free on-site estimate.
How We Build a Chain Link Fence in Whittier, Start to Finish

The job doesn’t take long, but the order matters. Here’s the real sequence we work through:
- Layout and utility marking (day of estimate through day 1). We walk the property line with you, confirm corners, gate locations, and which side of the fence faces your neighbor, then call for utility locating. This is where you decide height (4 ft, 5 ft, or 6 ft) and where the gates land. Whittier’s older lots often have ambiguous or unmarked property lines, so it’s worth pulling your plat map before this visit.
- Demo and clearing (day 1). We pull the old fence and posts, clear roots and debris, and haul it away. Small lots near Uptown can squeeze equipment access, which is why we ask about alley and side-yard clearance during the estimate.
- Setting posts (day 1 to day 2). Line posts get set in concrete at 8 to 10 ft spacing, terminal posts at corners and gate openings get deeper footings, and the concrete needs roughly 24 hours to cure before tensioning. This is the one step that can’t be rushed.
- Framework and mesh (day 2 to day 3). Top rail, tension bands, and mesh get installed and stretched to tension. We hang the gates last, then check swing and latch alignment. You’ll want to walk the fence line with us at the end to confirm gates open smoothly and there are no gaps at the bottom.
- Final walkthrough and cleanup. We inspect post plumb, tension, and gate function together, clean up the site, and hand over everything in writing under the 730-Day Done Right Promise.
Decisions that land on you: fence height, gauge and coating, gate style and swing direction, and whether you want a top rail both ways. Each of those changes the price, so we settle them at the estimate, not mid-job.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Chain link is simple, but “simple” still means real choices. Here’s what actually moves the spec:
- Wire gauge. Residential mesh runs from light 11.5-gauge (budget, fine for a dog-and-privacy role, less bite if a tree limb drops on it) to heavier 9-gauge (noticeably more rigid, worth the upcharge on any fence facing a park, alley, or windy boundary). We’ll point out which grade your site actually needs.
- Coating and finish. Galvanized is the value option and holds up fine on a dry Whittier lot; vinyl-coated (green or black) costs a bit more and reads less industrial against landscaping. Both stay rust-resistant, but coated mesh handles the Santa Ana wind and winter rain cycles with less streaking.
- Height. 4 ft for boundary marking, 5 ft for a typical pet yard, 6 ft for privacy and security. Whittier’s residential zones generally allow up to 6 ft in the rear and side yards; anything front-facing gets more scrutiny, especially near Uptown.
- Gates and framework. Walk gates, double drive gates, and cantilever or self-closing hardware all change the post and footing schedule. A drive gate needs deeper concrete and a heavier frame than a single walk gate.
- Top rail vs. no top rail. A full top rail adds rigidity and costs more; tie-back-only installs are cheaper but flex more over time.
If the fence is part of a full Fence Installation in Whittier plan that includes a wood or vinyl section, we’ll spec materials so the sections meet cleanly at the posts rather than leaving awkward transitions.
What Chain Link Fence Costs in Whittier, CA

Most residential chain link fence jobs in Whittier land between $3,500 and $9,000. Here’s how that range breaks down and what pushes a job to either end:
- Linear footage. The single biggest driver. A small rear-yard run runs near $3,500; a full perimeter of a standard lot pushes toward $9,000.
- Site conditions. Hard or rocky soil slows post-setting, and stubborn old posts or dense roots add demo time. Older Whittier lots with mature trees show up here often.
- Material grade. Heavier 9-gauge mesh, vinyl coating, and full top rail add cost; standard 11.5-gauge galvanized is the value end.
- Gates. Each gate adds concrete, hardware, and a heavier frame, so a drive gate plus two walk gates can add real money.
- Permit scope. Most standard rear-yard fences don’t need a permit, but a fence that’s front-facing, tall, or in a special review area can require a city submittal, and that adds both time and cost.
A written estimate from us includes material, labor, concrete, gate hardware, old fence removal, and disposal. It usually doesn’t include survey work if property lines are in dispute, retaining wall changes, or landscaping restoration.
See the difference
Before
After
Before
After
Before
AfterWhat Whittier Homes Specifically Do to This Job
Whittier is a built-out, older first-ring LA suburb, so chain link work here mostly means replacing aging fencing on long-established lots rather than fencing fresh ground. In and around Uptown Whittier, properties date back to the 1900s through the 1930s, and a fence near the historic district may need to match the surrounding character rather than a standard industrial look, so plan for design review if the fence is front-facing. East and south Whittier, especially ZIPs like 90604, run toward 1950s – 1960s tract homes where the original chain link has often survived decades and is starting to lean or rust at the posts. The San Gabriel Valley climate plays a role too: hot dry summers and Santa Ana winds stress posts and coating, and winter rains find any footing that wasn’t set deep enough.
If the fence project is part of a larger yard redraw, homeowners often pair this with Concrete Driveways & Concrete Work in Whittier to redo the approach and gate apron in one shot, or with Asphalt Driveways & Resurfacing in Whittier when the driveway surface needs attention alongside the new fence line.
Serving Whittier, CA – Our Local Coverage Area
We serve Whittier and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Whittier

Most residential chain link fences in Whittier take one to three days from layout to gate hang. Demo, post-setting, and concrete cure drive the timeline more than the mesh itself, and a larger project with multiple gates can stretch toward three days. Call (888) 271-7872 for a firm timeline based on your lot.
Standard rear and side-yard fences up to 6 ft usually don’t need a permit in Whittier, but front-facing fences, taller sections, or work near Uptown or a historic overlay can require city review. We’ll confirm the requirement for your lot before work starts – call (888) 271-7872 and we’ll walk through it with you.
Yes, in almost every case a chain link fence is set entirely in the yard and never touches plumbing, gas, or the house structure. The one thing we always clear first is underground utilities, which is why we call for locates before any post goes in. Call (888) 271-7872 to schedule your estimate.
Expect $3,500 to $9,000 for a typical residential job in Whittier, with height, gauge, gates, and lot size being the main variables. Call (888) 271-7872 for an exact written quote – estimates are free.
Our workmanship is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right – and manufacturer warranties cover the mesh, hardware, and coatings. Call (888) 271-7872 to review coverage for your specific spec.
Schedule Your Chain Link Fence Estimate in Whittier
Call (888) 271-7872 for a free on-site estimate on chain link fence in Whittier. A live person answers any hour, and if we need to call you back, you won’t land in a voicemail black hole. During the visit we measure the run, clear any permit questions, and hand you a written line-item quote with no surprise add-ons. From foundation to finish line, Groundwork Construction Co. is your fence contractor across Whittier, including the 90601, 90604, 90606, and 90612 ZIPs, and our Fence Installation service starts with that estimate.
Written by the team at Groundwork Construction Co.












