







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Duarte, CA: What It Costs and How Fast It Goes In
A chain link fence in Duarte typically runs $3,500 to $9,000 for a standard residential lot, and most jobs are finished in two to four days once the fence line is laid out and marked. You’re pricing a galvanized or vinyl-coated system on posts set in concrete, with a tension wire, top rail, and a gate or two. Call (888) 271-7872 for a free on-site estimate with a written line-item quote. We’ll walk the property line before we price a single foot.
How a Chain Link Fence Goes Up Here, Start to Finish

Every job runs on the same sequence. The durations below are what we see on typical Duarte lots, and they hold whether you’re on a flat 91010 parcel or a sloped 91008 hillside lot.
- Day 1, morning: line-out and utility check. We walk the property boundary with you and confirm corners against your plat or a prior survey. Before anyone digs, we call for utility locating so the posts don’t land on a gas or irrigation line. You decide the final line and gate placement here; moving a gate after posts are set adds cost.
- Day 1, afternoon: demo and post holes. Old fence comes out, brush and roots get cleared along the line, and post holes are dug to depth. On hillside lots the holes step down the grade, which means more posts and more concrete than a flat run. Expect this stage to run half a day on flat ground, most of a day on a slope.
- Day 2: posts set in concrete. Posts go in, plumb and on line, with concrete footings. The concrete needs to cure before the fence carries tension, so this is where the schedule pauses overnight. You’ll see the fence line take shape even though nothing’s stretched yet.
- Day 3: rails, mesh, and tension. Top rail and tension wire go up, then the chain link mesh is stretched and tied off. Gates get hung and adjusted. This is the day the job starts looking finished, and it’s also where we check every tie and tension bar.
- Day 3 or 4: walkthrough. We walk the fence with you, check gate swing and latch, confirm nothing’s loose, and hand over the workmanship warranty in writing. Any touch-up or adjustment happens on that visit, not a week later.
What you decide along the way: the fence height, the gauge of the mesh, whether you want a top rail, the gate style, and whether the fence ties into an existing structure or stands alone. We settle those at the estimate so the install days run without a pause.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Chain link isn’t one product. The choices below are the ones that actually change how the fence looks, how long it lasts, and what it costs.
- Height: 4 ft vs. 6 ft. A 4 ft fence suits a front-yard boundary or a dog run. A 6 ft fence is what most Duarte homeowners pick for a backyard, and it’s the height HOAs and many local codes expect for a rear property line. Going taller adds material and more wind load.
- Mesh gauge: 11.5 vs. 9 vs. 6. Standard residential mesh is 11.5 gauge. It’s fine for a boundary line but dents easily. A 9 gauge mesh costs more and holds up better against dogs and kids; 6 gauge is heavy commercial-grade and rarely needed on a house lot.
- Coating: galvanized vs. vinyl-coated. Bare galvanized is the least expensive and stands up well in dry heat. Vinyl-coated (typically in black or green) costs more but blends into landscaping and adds a layer against rust. In Duarte’s dry summers the galvanized core does most of the work either way.
- Framework: top rail or tension wire only. A top rail gives the fence a firmer, straighter top edge and helps it hold shape. Tension-wire-only is cheaper and common on taller fences, but the top of the mesh can sag over time.
- Gates: walk gate vs. drive gate. A standard 3 to 4 ft walk gate is straightforward. A drive gate wide enough for a vehicle needs heavier posts, a bracing frame, and often a drop rod, and it’s the single biggest line item that pushes a job toward the top of the range.
You don’t need to know mesh gauge off the top of your head. Tell us how the fence gets used (dogs, kids, privacy, just a boundary) and we’ll point you to the spec that fits instead of the one that just runs up the ticket.
What a Chain Link Fence Costs in Duarte, CA

For a typical residential property line in Duarte, plan on $3,500 to $9,000. That’s an installed price, not a materials estimate. Here’s what moves a job toward the low or high end:
- Linear footage. The biggest driver. A short back-line fence sits near the bottom of the range; a full perimeter around a larger lot pushes it up.
- Terrain. Flat valley-floor lots in 91010 are the fastest and least expensive to fence. Sloped 91008 foothill parcels need stepped post holes, more concrete, and sometimes a retaining element at the low corner.
- Gates. One walk gate is minor. Multiple gates, or a wide drive gate with heavy posts and bracing, adds real cost.
- Mesh and coating grade. Upgrading from 11.5 gauge galvanized to 9 gauge vinyl-coated is a modest per-foot bump that adds up over a long run.
- Demo and clearing. Removing an old fence, cutting roots, or clearing brush adds labor hours before a single new post goes in.
A written estimate from us spells out linear footage, post spacing, mesh gauge, coating, gate count and style, concrete, demo, and haul-away. It does not include a survey if one turns out to be needed, utility relocation, or repairs to landscaping and irrigation we have to work around, and we tell you that upfront rather than after the fact. No-hassle upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Duarte Homes Specifically Do to This Job
Duarte sits right where the Angeles National Forest meets suburbia, and that shapes fence work here more than most people expect. On the valley floor in 91010, mid-century ranches and 1950s-60s tract homes usually have a straight, flat property line that goes in fast. Up in the 91008 foothills, the picture changes: sloped parcels, brush-clearance requirements tied to wildland-urban interface standards, and posts that have to step down a grade rather than run level. Winter rains coming off the burned San Gabriels also mean drainage matters, and a fence line that channels runoff toward a neighbor’s lot is a problem we plan around before digging. If the fence work is part of a larger yard project, homeowners often pair this with Concrete Driveways & Concrete Work in Duarte or Asphalt Driveways & Resurfacing in Duarte so the gate approaches get finished in the same push. For the wider project, see our Fence Installation in Duarte page, and for other areas we cover, our Duarte service page lays out the full picture.
Serving Duarte, CA – Our Local Coverage Area
We serve Duarte and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions: Chain Link Fence in Duarte

Most residential chain link fences in Duarte take two to four days from line-out to walkthrough, with the concrete footings curing overnight in the middle. A small flat-lot job can wrap in two days; a sloped 91008 parcel with several gates runs closer to four. Call (888) 271-7872 for a schedule estimate.
Duarte generally requires a permit for fences above a certain height, and hillside properties can trigger additional review. Rather than guess at your lot, we check the current requirements for your address during the estimate and tell you exactly what’s needed before work starts. Our fences are installed to code, and we handle the permit process for you.
Yes, in most cases. A standard chain link install only disturbs the ground at each post hole, so your lawn and plantings stay largely intact. We work around sprinkler lines, trees, and existing structures; if a line or root sits directly on the fence path, we flag it at the estimate so you decide how to handle it.
Expect $3,500 to $9,000 for a typical residential fence in Duarte, depending on footage, terrain, gates, and mesh grade. A short flat run sits near the bottom; a long hillside perimeter with a drive gate sits near the top. Call (888) 271-7872 for an exact quote, and estimates are free.
Every chain link fence we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on posts, framework, tension, and gates for two full years. The mesh and coating carry their own manufacturer warranty on top of that. Call (888) 271-7872 and we’ll walk you through the coverage before you sign anything.
Get a Free Chain Link Fence Estimate in Duarte
If you’re pricing a chain link fence in Duarte, the fastest path is a free on-site estimate. Call (888) 271-7872 and a live person answers, day or night. We’ll ask about your property line, gate needs, and timeline, then set a time to walk the lot and put a written, line-item quote in your hands. No surprises, no pressure, just a real number you can plan on.
Written by the team at Groundwork Construction Co..












