







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Hacienda Heights: What the Job Actually Involves
Cabinets & countertops in Hacienda Heights typically run $14,000 – $45,000 and take two to four weeks from demo to final caulk, with countertop fabrication adding a separate 7 – 10 day lead time once templates are taken. The job covers removing the old boxes and slab, correcting the wall and floor, setting new cabinetry, templating stone, and finishing the sink, appliance and lighting connections. Call (888) 271-7872 and we’ll walk your kitchen and give you a line-item number on site, free.
How We Run a Cabinet and Countertop Job, Stage by Stage

Most homeowners picture a single install day. It’s closer to a five-stage sequence, and knowing the order is what keeps you from buying a sink that won’t fit the new cabinet run.
Stage 1: Site measure and layout (day 1, about 2 hours)
We measure every wall, check for out-of-square corners, and note where the floor dips. In hillside homes the floor is rarely level, and that matters because base cabinets sit on it. You leave this visit with a layout drawing and a decision to make: keep the current footprint or shift the sink, range or refrigerator. Moving them is a plumbing and electrical conversation, covered below.
Stage 2: Demo and rough-in correction (days 2 – 3)
Old cabinets come out, along with the countertop and any failing drywall behind them. This is where surprises live: water damage under a 1970s sink, a receptacle box buried behind a cabinet back, a floor that needs a patch before anything sits flat. We photograph everything and send it to you the same day we find it. If the electrical needs to move, a licensed electrician handles the rough-in before the boxes go back.
Stage 3: Cabinet set (days 4 – 6)
Base and wall cabinets go in level and shimmed, crown and filler pieces get scribed to the ceiling and walls, and drawers and doors get adjusted so they close with one finger. This is the stage where the quality of the box shows: full-extension soft-close drawers and solid shelving hold alignment for years, stapled particleboard doesn’t. You’ll want to have your cabinet hardware on site by now.
Stage 4: Template, fabricate, install the slab (days 7 – 16, mostly waiting)
A fabricator comes out with a digital template after the cabinets are set. Stone is cut off site, so expect 7 – 10 days between template and install. The slab arrives, gets set, seamed and polished, then the sink and faucet are dropped in and hooked up. This gap is the single biggest schedule variable in the whole project. If your timeline is tight, order the slab before demo starts so it’s in the fabricator’s queue.
Stage 5: Finish work and punch list (days 17 – 21)
Toe kick, end panels, appliance trim kits, and the final walkthrough where we open every drawer and check every seam together. Written punch list, then we come back and close it out. Our work is covered by the 730-Day Done Right Promise, so if a door sags in month eight, that’s our call to make, not yours.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
Three decisions drive most of the cost and nearly all of the satisfaction on this job: the cabinet box, the door style, and the countertop material. Here’s the honest version of each.
- Stock vs. semi-custom cabinets. Stock arrives in fixed sizes and is fastest and least expensive. Semi-custom lets you hit the ceiling, wrap a corner cleanly, and fit an odd wall, which matters in ranch homes with irregular rooms. KraftMaid sits in that semi-custom space and is one of the lines we install most.
- Door style and finish. Painted MDF doors give you a crisp, smooth face and lower cost; stained wood shows grain and hides wear better on a busy family kitchen. Flat slab doors clean up fast. Raised panels collect grease in the grooves and take more work to keep looking new.
- Countertop material. Quartz and natural stone (Cambria is the brand we specify most) cost more up front and hold up to heat, knives and daily traffic with almost no maintenance. Laminate is the budget option and will show a scorch ring if a hot pan lands on it. Butcher block is warm and repairable but needs oiling; it’s a poor fit next to a sink where water sits.
- Edge profile and thickness. A standard eased edge is included in most quotes. A mitered 2-inch edge, a waterfall end, or a full-height backsplash adds material and labor and changes the look more than most people expect.
- Undermount vs. drop-in sink. Undermount looks cleaner and is easier to wipe down, but it has to be chosen before the slab is cut. A farmhouse apron sink needs a cabinet built for it; you can’t retrofit one into a standard box later.
What Cabinets & Countertops Cost in Hacienda Heights, CA

Expect $14,000 – $45,000 for a full cabinet and countertop replacement here, with that lead range covering the whole job and the line items below showing where it breaks down.
| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
Four things push a Hacienda Heights job toward the high end. The first is size: a 10-foot galley lands near $14,000, while a 20-foot run with an island is a different project. The second is existing condition, specifically water damage and out-of-level floors, which add drywall and prep days. The third is moving plumbing or electrical, which requires a licensed trade and inspection. The fourth is material grade; quartz over semi-custom boxes with a full-height backsplash will sit near the top of the range.
A written estimate from us itemizes cabinets, slab, fabrication, labor, disposal, and permits as separate lines. What it won’t include is appliance cost, sales tax on materials you source yourself, or structural changes we haven’t seen at the walkthrough. We don’t do change orders on numbers we quoted. The price you sign is the price you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Hacienda Heights Homes Specifically Do to This Job
Hacienda Heights is unincorporated LA County, so your permits go through the County, not a city building department, and that changes the inspection calendar and the paperwork you’ll be handling. Much of the housing stock in the 91745 ZIP is single-story or split-level ranch built from the late 1950s through the 1970s, and a lot of it still has original aluminum wiring and shallow roof overhangs. On cabinet work that shows up as a panel upgrade once we open a wall and find a circuit that can’t carry a modern range hood and dishwasher, which is a cost we budget for on nearly every job on these streets. Hillside lots off the ridge roads mean floors out of level and steep driveways that limit how a slab gets delivered, so we plan the truck route and staging before demo day. Winter rains on sloped soil also make us check the wall behind the cabinets for moisture before we close it up. If the wider room is in scope, this work is usually part of a full Kitchen Remodeling in Hacienda Heights, and homeowners often pair it with Walk-In Showers & Shower Remodeling in Hacienda Heights or a Tub-to-Shower Conversion in Hacienda Heights while the trades are already on site. We cover Hacienda Heights and the surrounding blocks in La Puente, Valinda and Avocado Heights as one service area. If you’re weighing the broader project first, start with our Kitchen Remodeling service overview.
Serving Hacienda Heights, CA – Our Local Coverage Area
We serve Hacienda Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Hacienda Heights

Two to four weeks, with the countertop fabrication wait the biggest variable. Cabinets are set in days 4 – 6 and the stone install lands around day 12 – 16 after template. Call (888) 271-7872 for a schedule based on your room.
Only if the scope moves plumbing, electrical or a wall. Like-for-like cabinet and slab replacement usually doesn’t trigger one, but LA County requires a permit when you relocate a sink drain, add circuits, or open structure. We pull the permits and pass the inspections as part of the job.
Yes, and most of our Hacienda Heights jobs stay in the existing footprint. Keeping the sink and range where they are removes the plumbing and electrical permit scope and can cut several thousand dollars. A same-size sink swap is the easy version; a farmhouse sink or a relocated range is not.
Between $14,000 and $45,000 for the full job, with cabinets at $4,000 – $13,000 and counters at $2,000 – $6,500 as line items. Material grade and layout changes drive most of the spread. Call (888) 271-7872 for a written itemized quote, free.
Our work is backed by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If a door sags or a seam fails, we make it right. Manufacturer coverage on the cabinets and slab runs separately and is longer on some lines.
Get a Free Estimate on Your Hacienda Heights Kitchen
Call (888) 271-7872 and we’ll set a time to walk your kitchen, measure the walls, and put a line-item number in front of you. A live person answers the phone, day or night. On the visit you’ll see cabinet samples, talk through slab options, and leave knowing exactly what the job costs and what the schedule looks like. Free estimate, no obligation, no pressure to sign on the spot.
Written by the team at Groundwork Construction Co.












