







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Installation & Refacing in El Monte, CA
Cabinet installation in El Monte typically runs $4,200 to $9,800 for a standard 10×12 kitchen with semi-custom boxes, while refacing the same footprint usually lands between $2,400 and $5,600. The right choice depends on whether your existing cabinet boxes are solid and square or whether decades of settling have thrown them out of alignment. We handle both, and we’ll tell you honestly which one your kitchen actually needs before you spend a dollar.
Groundwork Construction Co. of El Monte does cabinet work as part of a full kitchen scope, not as a stand-alone swap. That matters here. A lot of El Monte homes were built between 1948 and 1975, and the kitchens in those houses usually have plaster walls, out-of-plumb corners, and plumbing that was moved at least once by a previous owner. Dropping new cabinets into that without addressing what’s behind them is how you end up with doors that rub and a dishwasher that won’t slide back in. We plan for the surprises before demolition, not after.
Call (888) 271-7872 and a live person picks up, any hour, any day. We’ll get you a free estimate and design consult and walk you through the difference between installing and refacing in plain terms.
Cabinet work almost never happens on its own. It sits inside a larger scope, and if you’re planning the whole room, start with our Kitchen Remodeling in El Monte page to see how cabinets, counters, and layout fit together. This page focuses purely on the cabinet layer: what it costs, what it involves, and how to know which route fits your house.
Key Takeaways
- Installation in El Monte: roughly $4,200 to $9,800 for a standard kitchen; refacing runs about $2,400 to $5,600.
- Refacing makes sense when boxes are solid and layout works. Replacement makes sense when boxes are water-damaged, sagging, or the layout fights you.
- El Monte’s older housing stock (much of it 1950s-1970s) means wall and plumbing conditions often drive the final number more than the cabinet style does.
- Every project is covered by our 730-Day Done Right Promise, backed in writing.
- Upfront pricing means the number on the estimate is the number you pay, and we offer 0% financing for 18 months plus $1,000 off projects over $10,000.

When You Need Cabinet Installation & Refacing
Cabinets fail in predictable ways, and El Monte’s climate has its own fingerprint on the process. Summers here run hot and dry, and the inland valley heat pulls moisture out of wood seasonally. Doors that were flush in March can bind by August. Add a few decades and you get the scenarios below.
- Doors that won’t stay shut or won’t close at all. In El Monte’s older tract homes, we regularly see hinge screws that have stripped out of particleboard boxes after 40 years of daily use. Once the screw holes are wallowed out, no amount of adjusting fixes it for long. That’s a replacement signal, not a repair one.
- Water damage under the sink or behind the dishwasher. Slow leaks are common in homes where the supply lines and disposal were never updated. Swollen boxes and delaminating bottoms mean the cabinet is structurally done, even if the doors still look fine from across the room.
- The layout fights how you actually cook. A 1962 galley with a 24-inch range slot and no landing space beside the fridge was designed for a different era. If you’re reworking the flow, new boxes are usually cheaper than trying to reconfigure old ones.
- You want a new look without tearing out solid boxes. Plenty of El Monte homes have good, square, plywood-built cabinets from the 1960s and 1970s that will outlast anything sold today. Refacing those, with new doors, drawer fronts, and veneer on the exposed frames, gets you a modern kitchen for roughly half the cost of replacement.
- Cabinet doors that are peeling, chipped, or thermo-foil that’s blistering. Heat and age break down older laminates. Once the finish is failing across multiple doors, refinishing rarely holds up and replacement fronts are the more durable move.
- You’re adding storage because the kitchen has none. El Monte’s smaller postwar footprints often max out at a handful of upper cabinets. Adding a pantry run, deep drawers, or a full-height cabinet wall is a layout question as much as a product one, and we plan it around your appliances.
If any two of those describe your kitchen, it’s worth a walkthrough. We’ll tell you which route fits, and we won’t upsell a replacement when refacing will do the job just as well.
Our Cabinet Installation & Refacing Process
Every project follows the same sequence. The order matters, because cabinet work done out of order causes the most expensive problems in a kitchen.
- In-home consultation and measurement. We measure the actual room, not the assumed one. Corners in older El Monte homes are frequently out of square by half an inch or more, and walls bow. We note every deviation up front so the cabinet plan accounts for it. This is also where we talk through door styles, finishes, and hardware, and where the design consult happens at no cost.
- Scope decision: install or reface. We inspect the boxes, check for water damage, test the frame for square, and confirm the layout works for your appliances. Then we put both routes and both prices in writing so you’re comparing real numbers, not guesses. Upfront pricing, no surprises.
- Material selection. We work with a curated set of brand partners across every trade, from KraftMaid and Cambria in kitchens to the cabinetry hardware and finishes that hold up to daily use. You choose quality based on what you actually want, not what happens to be sitting in a warehouse.
- Protection and demolition. Floors and counters get covered. Old cabinets, countertops if they’re coming out, and the backsplash come down in a controlled sequence. If plumbing or electrical needs to move, that happens now, before anything new goes in.
- Installation or refacing. New boxes get shimmed, leveled, and screwed into studs, not just into drywall. Refacing means new doors, drawer fronts, and veneer applied to the frames, with everything aligned and the reveals even. Our technicians have up to 12 years of experience, and the crew that starts your job is the crew that finishes it. Background-checked and in uniform, every visit.
- Final walkthrough. We open and close every door and drawer with you. We check the hardware, the alignment, the soft-close function, and the seams. Anything that isn’t right gets fixed before we call the job done, and everything is covered by the 730-Day Done Right Promise. If something fails later, we make it right.
One safety note worth flagging. Cabinets are heavy, and the load-bearing work sits above counter height. Old uppers in El Monte homes are sometimes anchored into plaster over lath with no blocking behind it, which means a cabinet full of dishes can pull free. We check the anchoring on every job and add blocking where it’s missing. That’s not something we’d suggest checking yourself and then re-hanging a loaded cabinet over a countertop. Leave the structural work to a trained installer.

Cabinet Installation & Refacing Pricing in El Monte
Here’s what cabinet work actually costs in this market. These ranges reflect El Monte specifically, where older homes and their wall/plumbing conditions often add scope that a newer house wouldn’t require.
| Scope | Typical Range (El Monte) | What Drives the Number |
|---|---|---|
| Refacing, standard kitchen (10×12) | $2,400 – $5,600 | Number of doors/drawers, veneer grade, hardware, whether boxes need repair first |
| Refacing with new countertop | $4,800 – $8,900 | Counter material (laminate vs. quartz like Cambria), sink cutout, backsplash |
| Full cabinet replacement, semi-custom | $4,200 – $9,800 | Linear footage, box construction (plywood vs. particleboard), door style, soft-close hardware |
| Premium/custom replacement | $9,000 – $18,500+ | Full-overlay custom fronts, inset doors, specialty storage, tall pantries |
| Layout change (moving plumbing/appliances) | Add $1,500 – $4,500 | Relocating supply/drain, moving electrical, patching floors and walls |
The single biggest cost variable in El Monte isn’t the cabinet line, it’s what’s behind the old cabinets. A mid-century home with plaster walls and a drain that needs to shift from the center of the sink run to the side can add a couple thousand dollars in one afternoon. We’d rather show you that line item on the estimate than surprise you with it mid-job. That’s the whole point of upfront pricing.
On top of the project cost, we offer 0% financing for 18 months to spread the number out, and $1,000 off any project over $10,000. For a full kitchen that includes cabinets, counters, and layout work, those two stack and change the monthly math considerably. The free estimate and design consult is where we put real numbers in front of you, and it costs nothing to get them.
If you’re weighing cabinet work against a bigger overhaul, our Kitchen Remodeling overview covers how cabinets, counters, and layout fit together in one scope. A lot of El Monte homeowners find that a cabinet refresh plus a new counter gets them 80% of what a full gut would, for less than half the money.
Is It Cheaper to Repair or Replace My Cabinets in El Monte?
Repair is cheaper when the boxes are solid and the problem is limited to hardware, hinges, or a single damaged front. Replacement or refacing is cheaper long-term when boxes are water-damaged, out of square, or the layout no longer works. A single stripped hinge or a warped door is usually a repair. Multiple failing doors, soft or swollen boxes, or plumbing that needs moving push you toward replacement. Call (888) 271-7872 for a free walkthrough, and we’ll tell you which side of that line your kitchen sits on.
How Much Does Cabinet Refacing Cost in El Monte?
Refacing in El Monte typically runs $2,400 to $5,600 for a standard kitchen, and the range depends mostly on how many doors and drawers you have, the veneer grade, and whether the existing frames need repair before any new front goes on. Refacing costs roughly half of replacement because you keep the boxes and only change what you see. We put both numbers in writing so you can compare directly. (888) 271-7872 gets you a free estimate.
How long does cabinet installation take?
Most cabinet installs take two to four days once demolition starts, and refacing usually runs one to three days because there’s no box removal. Your timeline stretches if plumbing, electrical, or wall repair is involved, which is common in El Monte homes built before 1980. We give you a start and end date in the estimate and stick to it. Call (888) 271-7872 and we’ll build a realistic schedule around your kitchen, not a sales pitch.
Can I see my kitchen before cabinets go in?
Yes. The design consult walks you through layout, door style, and finish before any cabinet is ordered, so you’re deciding based on a plan, not a guess. Our brand partners, including KraftMaid and Cambria for kitchen finishes, let you see and touch material samples during the consult. It’s part of the free estimate, and it’s where most of the decisions actually get made. Call (888) 271-7872 to schedule yours.
Written by the team at Groundwork Construction Co. of El Monte, serving El Monte.


