







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in South San Jose Hills, CA: What It Costs and How Long It Takes
A new concrete driveway in South San Jose Hills typically runs $5,310 to $14,160, and most residential pours are finished in three to five working days once the forms are set. Concrete work on the sloped lots here takes longer than a flat suburban lot because grading, drainage and sometimes a retaining wall have to come first. Call (888) 271-7872 and we’ll walk your property, check the existing base and put a written number in front of you at no charge.
How a Concrete Pour Actually Goes, Day by Day

Concrete is unforgiving. The finish you see on day five is decided by what happens in the dirt on day one, so we don’t rush the prep. Here’s the real sequence, with the decisions that land on you.
Stage 1: Site walk and layout (day 1)
We measure the existing driveway, mark the finish grade against the garage slab and the street apron, and figure out where water needs to go. On a South San Jose Hills hillside parcel, that means deciding whether the slope drains to the street, to a swale or to a dry well. You approve the layout and the slope before anything gets torn out.
Stage 2: Demo and haul-off (day 1 to 2)
Old concrete gets broken, loaded and hauled. A standard two-car driveway is roughly 400 to 600 square feet, which is a full day of demo and a second day if there’s a thick old slab or a failed base underneath. You’ll want to know where your cars go for the week; we’ll tell you up front how long the driveway stays unusable.
Stage 3: Grading, base and forms (day 2 to 3)
We cut to subgrade, compact the soil, and bring in 4 to 6 inches of compacted Class II base. Forms get set to the approved slope and any utility sleeves for irrigation or gate wiring go in now, before a single yard of concrete shows up. On graded hillside lots we may add a small retaining curb or drainage channel at the uphill edge, which is a decision point and a line item you approve before we build it.
Stage 4: Pour and finish (day 3 or 4)
Concrete arrives by truck, gets screeded to the forms, floated and finished. This is where you pick your surface: broom finish for grip, a light salt finish, or an exposed aggregate band at the apron. Control joints get cut within 24 hours to steer cracking where we want it. You’ll confirm color and finish before the truck rolls.
Stage 5: Cure and strip (day 4 to 7)
Concrete cures, it doesn’t dry. We keep it damp for the first few days in hot weather, strip the forms, and backfill the edges. Foot traffic is usually fine after 24 to 48 hours; vehicles wait about seven days, longer if the weather runs hot and dry. We do a final walkthrough with you before we call the job done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Options You’ll Be Choosing Between
Most of the cost spread on concrete work comes down to a handful of decisions. Here they are with the honest trade-off on each.
- Standard 4-inch slab vs. 5 to 6-inch reinforced slab: A 4-inch pour is fine for foot traffic and light cars and sits at the lower end of the range. A 5 or 6-inch slab with rebar or mesh costs more but holds up far better on a sloped South San Jose Hills lot where a loaded truck or an RV might park.
- Broom finish vs. stamped or exposed aggregate: Broom is the workhorse, grippy and inexpensive. A stamped pattern or an exposed aggregate border in Belgard or Techo-Bloc style gives you the look of pavers at a lower base cost, but the surface needs sealing every few years to stay sharp.
- Rebar vs. welded wire mesh: Mesh is cheaper and handles most residential pours. Rebar costs more per square foot and is worth it on wider slabs and on clay soil that moves with the seasons.
- Drainage: swale, trench drain or dry well: A graded lot with marine-layer moisture and hard winter rain needs somewhere for water to go. A simple swale is the cheapest fix; a trench drain or dry well costs more but keeps water off the garage slab.
- Control joints and expansion joints: Not a place to cut corners. Properly placed joints cost very little and are the difference between hairline cracks and a failed pour.
If the driveway is part of a bigger plan, this scopes neatly with our Driveway & Pavers service and the full Driveway & Pavers in South San Jose Hills work we handle.
What Concrete Driveways & Concrete Work Costs in South San Jose Hills, CA

Concrete driveway installation in South San Jose Hills runs $5,310 to $14,160. Here’s the line-item picture behind that number, plus the related concrete work that often rides along.
| Scope | Typical range |
|---|---|
| Concrete driveway installation | $5,310 – $14,160 |
| Driveway replacement (full tear-out and pour) | $5,900 – $16,520 |
| Driveway sealing (after cure) | $295 – $825 |
Four things push a job toward the bottom or top of that range:
- Square footage and slope. A short flat apron sits at the low end. A long hillside run with a grade that needs retaining gets you to the high end.
- Existing condition. A cracked slab over stable base is straightforward. A failed base, tree roots or a buried old pour means extra demo and haul-off.
- Reinforcement and thickness. Standard mesh over a 4-inch pour versus rebar over 6 inches changes material cost meaningfully.
- Drainage and site work. Adding a trench drain, swale or retaining curb is real labor and real material.
Your written estimate itemizes demo, base, reinforcement, concrete, finish and drainage so you know exactly what you’re paying for. What it doesn’t cover, and what we flag separately, is any permit fee your job triggers and any utility relocation we uncover after demo. The number you approve is the number you pay, backed by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat South San Jose Hills Homes Do to This Job
South San Jose Hills sits in that unincorporated LA County pocket (ZIP 91792) where half-acre to two-acre hillside lots, many still zoned for horses, mean a driveway is often a long private run graded across multi-level terrain, not a flat pad off the street. That changes the work: retaining walls, longer drainage runs and reinforced slabs carrying heavier loads than a typical suburban driveway ever sees. The housing mix, mostly 1960s to 1980s ranch and custom homes, also means we frequently find original galvanized plumbing and aging panels near the work zone, and any new addition or ADU conversion on a graded lot needs engineering that accounts for the slope. Seasonal clay-soil expansion up here is real, so we spec reinforcement and joints for movement, not just for looks. If your plan is to convert a garage into living space, homeowners often pair this with a Garage Conversion ADU in South San Jose Hills so the new driveway and apron get built to suit the finished layout.
Serving South San Jose Hills, CA – Our Local Coverage Area
We serve South San Jose Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked About Concrete Driveways & Concrete Work in South San Jose Hills

Most residential concrete driveways take three to five working days from demo to stripped forms, plus about seven days before you park on it. Hillside grading and drainage work can add a day or two. Call (888) 271-7872 and we’ll give you a realistic timeline for your specific lot.
It depends on what the concrete touches. A straight driveway replacement usually doesn’t need a permit, but retaining walls over a certain height, new drainage tied to the site, and any work near a structure or utility do. We check the county requirements for your parcel before we quote so nothing gets missed.
Usually yes. A driveway pour rarely disturbs plumbing unless the line runs under the slab, and in that case we locate it before demo. If your home still has original galvanized plumbing running under the driveway, that’s a conversation we have before the first cut, not after.
Concrete driveway installation runs $5,310 to $14,160, and a full replacement with tear-out runs $5,900 to $16,520. Larger sloped lots, reinforcement and drainage push toward the high end. Call (888) 271-7872 for an exact quote; estimates are free.
Every concrete project we do is covered by our 730-Day Done Right Promise, so if something isn’t right we make it right. That’s one of the longest workmanship guarantees in residential construction. Call us to schedule your free estimate and see the written guarantee before you commit.
Get a Written Concrete Estimate in South San Jose Hills
If you’re ready to price a new concrete driveway or concrete work in South San Jose Hills, call (888) 271-7872 for a free on-site estimate. We walk the lot, check the base and grade, and hand you a written line-item quote with the price locked in. A live person answers around the clock, and our technicians arrive in uniform. We serve all of South San Jose Hills and the surrounding foothill communities, including Valinda, West Covina and La Puente. If a bigger build is in the plan, homeowners often pair concrete with a New Detached ADU in South San Jose Hills and let us coordinate the site work from foundation to finish line.
Written by the team at Groundwork Construction Co.












