







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Whittier, CA: What It Takes and What It Costs
Custom & Geometric Windows in Whittier run $4,500 – $15,000 for a typical whole-house package of shaped or non-standard units, and $8,000 – $25,000 when the openings are arched, radiused or ganged into a feature wall. Plan on 3 – 6 weeks from template to install for true custom shapes, and 4 – 8 weeks total on a historic Uptown property that needs design review. Call (888) 271-7872 for a free on-site estimate.
How a Custom & Geometric Window Job Actually Runs

Shaped windows aren’t a box-store drop-in. Each one is templated against the actual rough opening, built to that template, then installed against trim and stucco that may be 90 years old. Here’s the real sequence.
Stage 1 – Site visit and field measure (day 1, about 2 hours)
We measure every opening, check plumb and square on the existing frame, and photograph the interior and exterior trim. On older Whittier homes we also note plaster depth and lath condition, because a radiused unit needs a stable substrate behind it.
Stage 2 – Design and unit selection (days 2 – 10)
You pick shape, material and glass package. We bring manufacturer catalogs and drawings so you’re comparing real options, not brochures. This is where a true half-round arch gets priced against a segmented arch that’s built from straight units – the segmented version often saves $1,500 – $4,000 and reads nearly the same from the street.
Stage 3 – Order and lead time (4 – 8 weeks)
Custom shapes can’t be expedited the way standard sizes can. Andersen and Marvin specialty lines typically run 5 – 7 weeks; radius work on Marvin’s custom line can stretch further. We confirm the delivery date in writing before we schedule anything else.
Stage 4 – Demo and framing prep (1 – 2 days)
Old units come out, and we check the framing for rot and for the surprises old homes hide – undersized headers, add-on framing from a prior remodel. Any structural repair gets flagged to you with a written change order before it’s done. We never proceed on a verbal.
Stage 5 – Install, flash and finish (2 – 4 days)
Units set level and plumb, flashed correctly at the head and sill, insulated at the perimeter, then trimmed and stucco-patched. We walk the job with you at the end, and the install is covered by the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
- Wood vs. clad-wood vs. fiberglass. Wood suits a period home in Uptown and takes stain and paint honestly, but needs repainting every 5 – 8 years. Clad-wood (aluminum outside, wood inside) gives you the historic interior look with almost no exterior maintenance, and costs roughly 20 – 30% more. Fiberglass holds up well and takes a factory finish, but the interior profile is flatter than wood.
- True divided lites vs. simulated divided lites. Genuine muntins are historically accurate and add real money – often $300 – $800 per unit. Simulated divided lites with an internal spacer bar look right at a fraction of the cost, and most buyers can’t tell the difference from 10 feet.
- Glass package. Dual-pane low-E is the baseline. Tempered glass is required in many shaped units and near doors. If you’re near Greenleaf in a historic block, note that some upgrade glass tints alter the appearance enough to draw comments in design review.
- Shape: half-round, segmented, elliptical, ganged arch. A true radius is the most expensive. A segmented arch made from three or five angled units saves real money. An elliptical or eyebrow arch costs somewhere in between, and often fits the roofline better on a Craftsman or Spanish-revival facade.
- Hardware and grid profile. Historic review may ask for a specific muntin width. We confirm before ordering so a beautiful window doesn’t get flagged post-install.
What Custom & Geometric Windows Cost in Whittier, CA

Custom & Geometric Windows in Whittier land in the $4,500 – $15,000 range for a whole-house package of standard-shape replacements, and $8,000 – $25,000 when true arched, radiused or ganged feature units are in the mix. A single arched unit alone runs $1,200 – $3,500 installed. Impact-rated glazing on top of any of that adds roughly $2,000 – $5,000 to the total package.
Five things push a job toward the low or high end:
- Number and shape complexity. Every shaped unit carries a template and fabrication premium; complex arches add per-unit cost.
- Existing condition of the rough opening. Rot, undersized headers or non-square framing means carpentry time. On 1920s homes in Whittier, this is the single most common surprise.
- Material grade. Clad-wood and fiberglass sit higher than vinyl. True divided lites add on top.
- Glass performance. Low-E is standard; impact-rated and upgraded thermal packages push the number up.
- Permit scope and historic review. A standard replacement in 90604 typically runs a straightforward permit. A change in opening size or appearance in the Uptown historic district triggers design review, which adds time and often a modest fee.
Every written estimate is line-item and it’s what you pay. The number on the page is the number on the invoice. If a surprise turns up mid-job, you get a written change order first. Nothing is done verbally.
See the difference
Before
After
Before
After
Before
AfterWhat Whittier’s Housing Stock Does to This Job
Whittier is a built-out, older first-ring LA suburb, so most of what we see here is remodel and rebuild on aging single-family homes, not new construction. In Uptown Whittier, the historic core along Greenleaf and Philadelphia, that means 1900s – 1930s Craftsman and period-revival homes where plaster walls, plank sheathing and hand-framed openings predate modern dimensional lumber. A 1925 Craftsman with a curved porch arch is a genuinely different job from a 1958 tract home in 90604, and the templating and framing prep reflect that.
The other Whittier-specific wrinkle is design review. The city actively reviews exterior work in the historic district, so a window change that would be routine in Hacienda Heights or La Puente can trigger a submittal here. We build review timelines into the schedule from the start, not after demo. The postwar tract homes in the east and south (90603, 90604, 90605) are simpler – standard framing, standard permits, straightforward installs. In both cases we plan summer work around heat and Santa Ana wind days, since stucco patching and exterior sealing don’t tolerate 100-degree afternoons well.
Serving Whittier, CA – Our Local Coverage Area
We serve Whittier and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Custom & Geometric Windows in Whittier

Plan on 4 – 8 weeks total from signed contract to final walkthrough. Custom fabrication itself takes 4 – 6 weeks on most lines; demo, install and finish take 3 – 6 working days. Historic review for a Uptown property can add 2 – 4 weeks. Call (888) 271-7872 for a realistic timeline on your specific openings.
Yes – window replacement and any change to opening size requires a permit through the City of Whittier. Like-kind replacement in the postwar tract neighborhoods is typically a straightforward residential permit. A shape change or facade change in the Uptown historic district also triggers design review, and we tell you upfront which track your job falls on.
Usually yes, if the existing opening is already the right shape or can be enlarged within the existing wall cavity. We confirm framing and any plumbing or electrical in the wall during the site visit. If a corner requires structural work, we price it in writing before touching anything.
A single custom-shaped unit runs $1,200 – $3,500 installed, depending on size, material and glass. Fully custom radius work on a Marvin or Andersen specialty line sits at the top of that range; a segmented arch fit from standard units sits at the bottom. Call (888) 271-7872 – estimates are free and itemized.
The installation is covered by the 730-Day Done Right Promise, and the manufacturer’s warranty on the units themselves comes with them. If something we installed isn’t right, we make it right. That’s the written commitment, and we put it in the contract.
Get a Free Estimate on Custom & Geometric Windows in Whittier
Every Custom & Geometric Windows project we take on starts with a free on-site estimate and design consult. Call (888) 271-7872 and a live person answers – day or night. We’ll schedule a site visit, measure your openings and hand you a written, line-item quote with no surprises. If your project is over $10,000, ask about the $1,000 off, and ask about 0% financing for 18 months.
Written by the team at Groundwork Construction Co.












