







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in West Covina, CA: What They Cost and How the Work Runs
Custom & Geometric Windows in West Covina typically run $6,000 to $22,000 installed for a whole-house package, and most single rooms land between $2,500 and $7,000 depending on how far the shapes stray from a standard rectangle. Arches, half-rounds, trapezoids, angled corner units and true radius work cost more than the same square footage in a stock window because every opening is measured, templated and built to order. A typical job runs four to eight weeks from order to final inspection. Call (888) 271-7872 for a free on-site measurement and a written, line-item price.
How we build a geometric window package, step by step

Custom windows aren’t a swap-out job. Nobody pulls a stocked unit off a shelf and drops it into an arched opening. Here’s the actual sequence, with the time each stage eats.
Day 1: Measure and template (2 to 3 hours)
We don’t trust a tape measure alone on curves. On arched and angled openings we build a physical template or run a laser template of the rough opening, then note the wall thickness, the existing framing, and whether the header is sound. You decide at this stage which openings get custom shapes and which stay rectangular, since a rectangular window is dramatically cheaper than a curved one of the same size.
Weeks 2 to 5: Order and fabrication
Curved and trapezoidal units are made to order. Lead times for Andersen and Marvin custom shapes usually land in the three- to five-week window, sometimes longer for true radius work. You choose the frame material, glass package and finish grille layout while the order is in the queue. This is the long pole in most West Covina jobs, so get your order in early.
Day 3 of construction: Demo and prep
Crews pull the old units, check the rough framing, and repair any rotted sill or header before the new window goes near the opening. On the 1950s and 60s West Covina tract homes, that often turns up a soft header or a previous homeowner’s improvised framing. We can’t hang a custom arch on bad framing, so we fix it now.
Day 4 to 5: Install and flash
Windows get set, shimmed level, and flashed correctly at the head, jambs and sill. Flashing is the part nobody sees and everybody regrets skipping. We seal with a compatible caulk and check drainage paths so the San Gabriel Valley winter rain has somewhere to go.
Day 6: Inspect and walk
Where a permit was required, we schedule the city inspection and walk the job with you. Final pass includes operation testing on every operable sash, confirming screens and hardware, and a written punch list.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
- Frame material: vinyl vs. wood vs. fiberglass vs. aluminum-clad. Vinyl is the cheapest and holds up well to the dry heat; wood looks best but wants repainting against our intense UV; fiberglass resists the thermal cycling and the odd hailstorm; aluminum-clad gives you the wood look outside with a finish that holds. Cost climbs roughly in that order.
- Glass package. Double-pane low-E is standard now and stays clear in this sun. Triple-pane adds cost and weight and rarely pays back in West Covina’s mild winters. Laminated glass helps on street-facing windows if you care about noise and security.
- Shape and grille layout. Half-rounds, eyebrows, quarter-rounds and trapezoids all cost more than a rectangle. Grille pattern (true divided lites vs. simulated) swings the number too. A simulated-grille arch looks nearly the same for a fraction of the cost.
- Finish and hardware. Factory finish holds up better against UV than field paint. You pick color, handle style and screen type; screen upgrades for the dusty summer months are worth the modest bump.
What Custom & Geometric Windows costs in West Covina, CA

A whole-house custom package generally lands between $6,000 and $22,000, with single-room projects sitting at $2,500 to $7,000. For a broader scope conversation we also quote standard replacements on the same visit, but the shapes are what drive the price here. The Windows & Doors in West Covina page covers standard replacement; this page is only about the custom and geometric work.
What pushes a job to the high end:
- Shape complexity. A true radius arch or an angled corner unit costs far more to fabricate than a square.
- Opening count and size. More openings multiply the labor, templates and fabrication cost.
- Existing condition. Rotten framing, a sagging header or unexpected rot under stucco adds repair labor.
- Frame material. Wood and aluminum-clad run above vinyl for the same opening.
- Permit scope. New shapes and enlarged openings usually need a permit and inspection; a simple swap inside an existing frame may not.
A written estimate includes the units, factory finish, glass package, flashing and trim, installation labor, and permit fees where required. It does not include framing repairs found after demo, or painting and stucco patching around the new opening. We flag those up front so the final number doesn’t surprise you.
See the difference
Before
After
Before
After
Before
AfterWhat West Covina homes specifically do to this job
Most homes here date to the late 1940s through the 1970s, built as single-story stucco tract houses on slab foundations, and that era changes how a custom window goes in. The side yards are narrow and lots are tight, so working around the exterior is often a scheduling job in itself. Original window openings in these homes are often slightly out of square, so a geometric unit has to be built to the real opening rather than to a nominal dimension. West Covina’s Community Development Department takes a close look at anything that enlarges an opening or changes the exterior envelope, which is exactly what a new arch or angled corner unit does, so plan check is part of the schedule, not an afterthought. The dry San Gabriel Valley summers and periodic Santa Ana winds work the seals and finishes hard, so factory finishes and proper flashing matter more here than in a mild coastal market. If the job turns into a wider exterior update, many homeowners pair this with Concrete Driveways & Concrete Work in West Covina. We cover the whole of West Covina, plus nearby Valinda, La Puente and South San Jose Hills, and we’re happy to walk a whole-house window plan as our Windows & Doors service if the scope grows to include standard units too.
Serving West Covina, CA – Our Local Coverage Area
We serve West Covina and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Custom & Geometric Windows in West Covina

Most projects run four to eight weeks from order to inspection, with the install itself taking two to three days. The long stretch is fabrication for curved and angled units. Call (888) 271-7872 for a schedule estimate on your openings.
If the new window changes the opening size or the exterior envelope, the Community Development Department usually requires a permit and inspection. Same-size replacements inside the existing frame typically don’t. We handle the paperwork and get it pulled before work starts.
Yes in most cases. The new units fit inside the existing openings and only minor framing repair is added. Structural change is only needed if you’re enlarging the opening or adding a new one, and that’s a separate conversation.
Whole-house packages run $6,000 to $22,000, and single-room work sits around $2,500 to $7,000. Shape, material and opening count are the biggest drivers. Call (888) 271-7872 for an exact quote – estimates are free.
Every custom and geometric window install is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right. Window manufacturers carry their own product warranty on the units themselves.
Get a free estimate for custom and geometric windows
We’ll measure your openings, build a template where the shapes call for it, and hand you a written line-item price with what’s included and what isn’t. A live person answers the phone at (888) 271-7872, day or night. Upfront pricing, no surprises, and every job backed by the 730-Day Done Right Promise from a state-licensed, insured team. From foundation to finish line, one contractor for the whole scope. If the project grows past the windows, we can quote the full exterior on the visit.
Written by the team at Groundwork Construction Co. of El Monte.












