







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Custom & Geometric Windows in Hacienda Heights, CA: What They Cost and How Long They Take
Custom & Geometric Windows in Hacienda Heights run roughly $4,500 – $15,000 for a standard whole-house replacement and $8,000 – $25,000 when you’re ordering true architect shapes: arches, half-rounds, trapezoids, trapezoid-and-arch combinations, and stacked picture units built to a hillside view. Most single custom units take 4 – 8 weeks from template to install because the glass is cut once, to your rough opening. Call (888) 271-7872 for a free on-site estimate; we’ll measure, template, and price before anyone touches a frame.
How We Run a Custom & Geometric Job, Stage by Stage

Geometric windows don’t get ordered off a shelf. Each angle is a decision, and each decision has to survive inspection. Here’s the sequence we follow, and what we need from you at each stop.
Stage 1: Site visit and shape survey (day 1, about 2 hours). We measure every rough opening, check wall depth, and confirm whether the framing can carry a heavier unit. On a hillside lot, that means a level and a look at the wall below the sill before we commit to an arched picture window. You decide the shape language you want (one hero arch, or a series of matched rectangles with arched transoms).
Stage 2: Template and manufacturer order (days 2 – 10). For true radius and trapezoid units, we build a paper or plywood template of the opening and send it with the order so the glass is cut to your wall, not to a catalog drawing. This is where lead time lives: 4 – 6 weeks is common for geometric glass, longer for special finishes or oversize picture units. You sign off on the window schedule: sizes, operation (fixed, casement, awning), finish color, and glass package.
Stage 3: Permit and inspection window (weeks 2 – 4, runs parallel to the order). Hacienda Heights is unincorporated LA County, so window permits and inspections go through the county building department, not a city hall. We pull the permit, schedule the rough framing inspection if the wall is being altered, and line up the final inspection before install.
Stage 4: Prep and install (2 – 4 days for a typical set, 1 day for a single unit). We protect floors, remove the old unit, check the rough opening for rot and water damage (common on 1960s-era walls with shallow overhangs), reframe if needed, flash and seal, then set the new unit. A single arch or fixed picture window usually goes in and seals in one day. A whole-house schedule of 8 – 12 units takes 3 – 4 days. You’ve already made every decision by now, so this stage is quiet.
Stage 5: Trim, finish, and final walk. Interior and exterior trim goes on, we caulk and paint the perimeter, clean the glass, and walk the job with you. The county final inspection follows. If anything about the fit or finish isn’t right, it’s covered by our 730-Day Done Right Promise, and you’ll have it in writing before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Be Choosing Between
- Frame material: vinyl vs. wood-clad vs. fiberglass. Vinyl is the lowest-cost path and holds up fine in the Puente Hills heat, but it limits how tight a radius you can get on a true arch. Wood-clad aluminum (an Andersen or Marvin-style product) gives you crisp shapes and a premium look, at a higher price. Fiberglass sits in the middle and resists heat distortion well.
- Glass package. Low-E, argon-fill, and laminated glass all change the number. For west- and south-facing geometric units that catch the afternoon sun, we recommend Low-E with a solar-control coating; for wildfire-adjacent brush properties, laminated or tempered glass adds impact resistance.
- Operation. Fixed units are cheapest and cleanest-looking for geometric shapes. Casement and awning operation adds cost and hardware, but gives you ventilation in a room that only has one big shape.
- Finish and color. Standard white and bronze are stocked and quick. Custom color matching for a hillside custom home adds weeks and dollars.
- Grille and muntin patterns. Simulated divided lites and true divided lites change the look; true divided lites cost more and complicate the shape.
If your geometric windows are one piece of a bigger envelope project, they often work best planned alongside a full window and door schedule, which is where our Windows & Doors in Hacienda Heights page comes in. Either way, the shape and glass decisions get made here, on this job.
What Custom & Geometric Windows Cost in Hacienda Heights, CA

Plan on $4,500 – $15,000 for a standard whole-house replacement and $8,000 – $25,000 for a custom and geometric schedule with arches, half-rounds, and trapezoids. A single arched picture window often lands in the $1,200 – $3,500 range installed; a matched set of three radius units across a view wall pushes toward the middle of the range or higher.
What moves the number up or down:
- Count and complexity of shapes. One arch and one rectangle is a small job. A continuous run of matched trapezoids is a custom-glass order, and the glass is where most of the money sits.
- Existing wall condition. Rot, termite damage, or failed flashing behind the old window adds reframing and repair. On 1950s – 70s ranch stock in Hacienda Heights, this is common.
- Structural changes. Widening an opening or cutting a new one means a header and a framing inspection. That adds cost and a permit revision.
- Glass and finish grade. Low-E, laminated, or custom color all move the price.
- Permit scope. Straight like-for-like replacement is a lighter permit than an alteration that changes the opening size.
A written estimate from us is line-itemed: unit cost, install labor, trim, flashing, disposal, and permit. What’s typically not included: structural repair if we find rot behind the wall, painting beyond the immediate perimeter, and HOA submission fees. We tell you which of those might apply before you sign, not after. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Hacienda Heights Homes Specifically Do to This Job
Most of the homes we work on in Hacienda Heights are single-story and split-level ranches built from the late 1950s through the 1970s, often on sloped lots with shallow roof overhangs. That combination changes a window job in ways a flat-lot tract home never shows: sun and rain hit the walls harder under a shallow overhang, and wood framing behind a 1960s sill is often soft by the time we open the wall. On hillside streets, we routinely find original aluminum branch wiring that has to be addressed when a wall is opened for a new opening. Because Hacienda Heights is unincorporated, the permit and inspection path runs through LA County rather than a city building department, so the schedule has its own rhythm. Santa Ana winds and summer sun also wear exterior sealant and finish faster than on the coast, so we spec and caulk accordingly.
Serving Hacienda Heights, CA – Our Local Coverage Area
We serve Hacienda Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Custom & Geometric Windows in Hacienda Heights

Four to eight weeks from order to install for a single custom unit, with the physical install taking one day for one window and three to four days for a full schedule of 8 – 12 units. Most of that time is manufacturing and permit, not labor. Call (888) 271-7872 for a schedule specific to your home.
Yes, in most cases. Because Hacienda Heights is unincorporated, the permit goes through LA County, and a like-for-like replacement is a different permit than one that changes the opening size. We pull the permit and handle the inspection for you.
Often yes. If the new unit fits the existing rough opening, we can template and order without a header change or structural work, which keeps both the timeline and the price down. Widening or creating a new opening is what triggers framing work and a revised permit.
Expect roughly $1,200 – $3,500 installed for one arched picture window, depending on size, glass package, and whether the wall needs repair. A whole custom schedule runs $8,000 – $25,000. Call (888) 271-7872 for a line-itemed quote; estimates are free.
Yes. Our workmanship is covered by the 730-Day Done Right Promise, one of the longest in residential construction, and the window manufacturer’s product warranty applies to the unit itself. If the fit, seal, or finish isn’t right, we make it right.
If your project also includes a new approach or walkway, homeowners often pair this with Concrete Driveways & Concrete Work in Hacienda Heights or Asphalt Driveways & Resurfacing in Hacienda Heights, and you can see the wider scope on our Windows & Doors service page. We cover the full Hacienda Heights area, including 91745 and the surrounding Puente Hills neighborhoods.
Get a Free Estimate on Custom & Geometric Windows in Hacienda Heights
Call (888) 271-7872 to schedule a free on-site estimate. A live person answers, day or night. We’ll measure the openings, talk through shapes and glass, and leave you with a line-itemed written quote and a realistic timeline. No pressure, no vague number you can’t trust. $1,000 off projects over $10,000, and 0% financing for 18 months if you need it.
Written by the team at Groundwork Construction Co.












