







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Vincent, CA: What to Expect, Start to Finish
A paver driveway in Vincent typically runs $7,000 – $18,000 installed, and most jobs are finished in four to six working days once materials land on site. The number moves with square footage, base depth, and whether we’re replacing a slab or building over good compacted ground. If you’re pricing one of these, call (888) 271-7872 and we’ll walk your property, measure it, and put a line-item estimate in your hands. No vague “starting at” figures.
How we build Paver Driveways in Vincent, step by step

Every paver driveway we build follows the same five stages. The order doesn’t change much, but the durations do, and you’ll make a handful of decisions along the way.
Stage 1: Site visit, measure, and material selection (day 1)
We measure the actual driveway footprint, check slope and drainage away from the garage, and look at what’s underneath. If there’s an existing slab, we test whether it’s sound enough to stay or needs full removal. This is also where you pick your paver style, color, and pattern from real samples. That decision sets your material cost, so it happens before we quote final numbers.
Stage 2: Demolition and haul-off (day 1 – 2)
Old concrete, asphalt, or worn pavers come out, usually with a skid-steer and a jackhammer on the slab edge. A standard two-car driveway (roughly 400 – 600 square feet) takes most of a day to demo and load out. Deeper or reinforced slabs can push into a second day.
Stage 3: Excavation and base prep (day 2 – 3)
This is the stage most homeowners never see and the one that decides whether your pavers stay flat for twenty years. We excavate to depth, then build up a compacted aggregate base in lifts, compacting each layer. A proper base for a residential driveway usually runs 4 – 6 inches compacted, more where the subgrade is soft. Skipping this step is the number one reason cheap paver driveways fail in two winters.
Stage 4: Setting bed, edge restraint, and paver installation (day 3 – 5)
We screed a level sand setting bed, install the edge restraint (critical on a driveway where vehicle loads push outward), then lay the pavers in your chosen pattern. A crew lays 300 – 500 square feet a day on a straightforward rectangular driveway. Cutting around curves, borders, and apron transitions slows it down.
Stage 5: Compaction, joint sand, and final walkthrough (day 5 – 6)
We run a plate compactor over the finished field, sweep polymeric joint sand into the joints, and clean the surface. Then we walk the job with you, check the grade against the garage slab and street apron, and hand over care instructions. Cure time before you drive on it is short, typically 24 hours after the joint sand settles.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Paver driveways aren’t one product. The choices below are the ones that genuinely change how yours looks, wears, and costs.
- Concrete pavers (the default): Interlocking units in a range of colors and shapes, strong under vehicle loads, and repairable if a section ever cracks. Expect the middle of the $7,000 – $18,000 range for a typical Vincent two-car driveway.
- Clay brick pavers: Warmer look and excellent color-fastness, but they cost more per square foot and need a skilled installer for tight joints. Great fit for the older 1950s – 1970s homes in 91722 where brick already shows up in the architecture.
- Permeable pavers: Open-graded units with wider joints that let water drain through the base. Worth the premium where you’re fighting standing water or dealing with runoff limits.
- Base and edge spec: The unseen decision. A deeper compacted base and a proper edge restraint cost more up front and are why one driveway is flat at year ten and its neighbor is rutted at year three.
- Border and pattern: Running bond, herringbone, and basketweave each lay at different speeds; herringbone is stronger interlock but slower to install. A contrasting border adds a defined edge for a modest upcharge.
What Paver Driveways cost in Vincent, CA

Plan on $7,000 – $18,000 for a paver driveway in Vincent, with most standard two-car installs landing in the $9,000 – $14,000 band. Here’s what pushes a job toward either end:
- Square footage: A short single-car pad sits near the low end; a wide driveway with an apron and turnaround runs high.
- Existing surface: Rough asphalt or a cracked slab adds demo and haul-off cost. Sound ground is cheaper to build on.
- Base condition: Soft or poorly drained subgrade means deeper excavation and more aggregate.
- Paver grade and pattern: Premium clay brick or intricate herringbone costs more than a standard concrete paver in running bond.
- Drainage and grade work: Adding a channel drain or correcting slope toward the street adds labor.
Your written estimate covers demo, haul-off, base materials, edge restraint, pavers, joint sand, and compaction. It typically excludes any utility relocation, root removal from mature trees, and structural changes to the garage apron. We spell out exclusions line by line so there are no change-order surprises. Upfront pricing, no surprises – that’s the commitment behind it.
See the difference
Before
After
Before
After
Before
AfterWhat Vincent homes specifically do to this job
Vincent is an unincorporated pocket of the San Gabriel Valley, which means nearly all construction here runs through LA County’s permitting and inspection process instead of a city hall. We build our schedule around County Building & Safety plan checks and field inspectors, and that timing matters for a driveway project because grading and drainage work can trigger an inspection before pavers go down. It’s a wrinkle that doesn’t apply one town over in Azusa, which has its own building department – and because Vincent is unincorporated, a job near the Covina or Azusa border can shift from County to city jurisdiction block by block. Out-of-area contractors bidding here regularly miss that.
The housing stock shapes the work too. The 91722 area is dominated by mid-century single-story tract homes on small lots, many with attached garages and later room additions. That means tight side-yard access, mature trees whose roots buckle old slabs, and driveways that have been patched a dozen times. In the hot, semi-arid eastern San Gabriel Valley, summer sun bakes and shifts old concrete, and the Santa Ana wind season scatters debris that loads up joints. Pavers flex where concrete cracks. If your driveway work is part of a full Driveway & Pavers in Vincent plan, we scope it all together. And because ADU and addition work is common here, homeowners often pair a driveway rebuild with ADU Design & Permitting in Vincent or a Garage Conversion ADU in Vincent so the access and parking get sorted in one pass. We cover the whole Vincent area, and this sits inside our broader Driveway & Pavers service.
Serving Vincent, CA – Our Local Coverage Area
We serve Vincent and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Paver Driveways in Vincent

A typical Vincent paver driveway takes four to six working days once materials are on site. Demo and base prep are the slow parts; laying and compaction move fast on a straightforward rectangle. Call (888) 271-7872 for a timeline built around your specific lot and access.
Often yes, and it runs through LA County rather than a city hall because Vincent is unincorporated. A driveway that changes grade, drainage, or the street apron typically needs a permit and inspection. We pull the permits and schedule the inspections so the sign-off isn’t on you. Call (888) 271-7872 to find out what your project needs.
Most Vincent paver driveways land between $7,000 and $18,000, depending on square footage, base depth, and paver grade. A standard two-car install usually sits around $9,000 – $14,000. Call (888) 271-7872 for an exact line-item quote – estimates are free.
Sometimes, if the existing base is sound and the finished height still clears your garage slab and street apron. More often, a proper paver driveway needs the old surface removed and a fresh compacted base built. We check on site and tell you honestly which path makes sense. Call (888) 271-7872 to book a look.
Every paver driveway we build is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That backs the base prep, installation, and finish, because those are what fail when work is rushed. Call (888) 271-7872 with questions about your project.
Get a free paver driveway estimate in Vincent
Ready to price a paver driveway for your Vincent home? Call (888) 271-7872 for a free on-site estimate. A live person answers around the clock, and on the visit we’ll measure the driveway, check base and drainage, confirm what permitting your project needs, and hand you a written line-item quote with the warranty in writing. No pressure, no vague figures – just a clear number you can plan around.
Written by the team at Groundwork Construction Co.












