







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Vincent, CA: What the Job Actually Involves
Replacing a vanity, re-tiling a bathroom floor or shower surround, and swapping fixtures in Vincent typically runs $9,000 – $28,000 for a full bathroom scope, or $800 – $3,000 for a vanity alone, and most of these jobs wrap in 1 – 3 weeks once materials are on site. Vincent’s mid-century tract homes hide surprises behind the tile, so we bid from what’s actually there, not from a photo. Call (888) 271-7872 for a free on-site estimate.
How our Vanities, Tile & Fixtures work runs, stage by stage

This isn’t a swap-and-go job, and we don’t treat it like one. The order matters, because tile, plumbing, and the vanity have to agree on the same plane and the same drain line before anything gets set in mortar.
- Stage 1: Demo and discovery (1 – 2 days). We pull the old vanity, tear out tile to the substrate, and open the wall behind the fixtures. This is where we find out whether the 1960s-era drain is cast iron, whether the subfloor is sound, and whether the shutoff valves will hold. You approve any change in writing before we go further.
- Stage 2: Rough-in and inspection (1 – 2 days, longer if County review is involved). If the vanity moves, or the shower valve relocates, the plumbing and electrical rough-in gets inspected before tile goes up. Everything behind the wall gets photographed so you have a record. This is the stage where a project either stays on schedule or picks up a week.
- Stage 3: Substrate and waterproofing (1 – 2 days). Cement board or a bonded waterproofing membrane goes down, then a flood test if there’s a shower pan. Waterproofing is where cheap jobs fail five years later, so we don’t rush it.
- Stage 4: Tile and vanity setting (3 – 5 days). Wall tile, floor tile, grout, then the vanity cabinet set and leveled, then the countertop template if you’re going with stone. You’ll make your grout and layout decisions before this stage starts, not during it.
- Stage 5: Fixtures, trim, and punch (1 – 2 days). Faucets, shower trim, mirrors, towel bars, caulk, and a final walkthrough where you sign off against the written scope. Anything on the punch list gets handled before we call the job closed.
Across all five stages, the homeowner makes three real decisions: tile and finish selection, fixture brand and finish, and whether to move any plumbing. Everything else is our problem. Most jobs are completed in a single visit per stage with the same background-checked, uniformed technicians throughout, and every one of them is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
You’ll make more decisions here than you expect, so here’s the honest trade-off on each one, not a catalog page.
- Vanity: stock, semi-custom, or custom. Stock cabinets run $800 – $1,600 installed and work fine in a standard 91722 bathroom. Semi-custom (KraftMaid, for example) lands closer to $1,800 – $3,000 and buys you the exact width and drawer layout. Custom buys the fit, costs the most, and makes sense only when the wall is out of square.
- Countertop: quartz vs. cultured marble vs. granite. Quartz (Cambria and similar) holds up to moisture and cleans up easily. Cultured marble is the budget pick and can yellow. Granite is durable but needs sealing. Cost gap between them is real, and it doesn’t change the lifespan much.
- Tile: porcelain vs. ceramic vs. natural stone. Porcelain is the workhorse for floors and showers. Ceramic is cheaper and softer, fine on walls only. Natural stone looks the best and demands the most maintenance. Grout line width and tile size also drive labor.
- Fixtures: chrome, brushed nickel, matte black, or brass. Finish is a style call, but brand matters for parts availability. Kohler and similar hold up and stay serviceable.
- Tile layout: stacked, offset, herringbone, or large-format. Herringbone and large-format both add labor hours, sometimes by 30 – 40%. Worth it if you love the look, expensive if you don’t.
What Vanities, Tile & Fixtures costs in Vincent, CA

Here’s the working range for Vincent and the surrounding San Gabriel Valley, with the numbers we actually quote. A vanity-only job runs $800 – $3,000. A full bathroom scope with tile, fixtures, and vanity runs $9,000 – $28,000, with most of our Vincent projects landing between $11,000 and $19,000.
The five things that push a job up or down:
- Size and layout. A 5×8 hall bath is a fraction of the tile and labor of a primary bath twice that size.
- Existing condition. Water damage under old tile, a failing subfloor, or galvanized supply lines all add demo and repair time before the pretty stuff starts.
- Moving plumbing or electrical. Relocating a drain or adding a GFCI outlet means opening the wall, rough-in, and inspection, which is where budgets get tested.
- Material grade. Porcelain vs. natural stone, stock vs. semi-custom cabinet, chrome vs. brass: each step up shows up in the total.
- Permit scope. A cosmetic refresh usually doesn’t trigger a permit. Moving plumbing, adding a shower, or altering structure does.
Every written estimate lists line items for demo, rough-in, tile, vanity, fixtures, and cleanup, plus a clear note on what isn’t included (often: structural repair if rot is found, and specialty glass). Our pricing is upfront and fixed, so the number on the estimate is the number you pay, with $1,000 off projects over $10,000 and 0% financing for 18 months available.
See the difference
Before
After
Before
After
Before
AfterWhat Vincent homes specifically do to this job
Vincent is an unincorporated pocket of the San Gabriel Valley, and that single fact changes how we schedule this work. Nearly all construction here runs through LA County’s permitting and inspection process rather than a city hall, so we build our schedules around County Building & Safety plan checks and field inspectors. A project on one side of the street might be County jurisdiction, and a job two blocks toward the Azusa or Covina border can flip to a city building department. That’s the wrinkle that trips up out-of-area contractors bidding here, and it’s why we confirm jurisdiction before the first permit is filed.
The housing stock is the second thing. Most of the 91722 ZIP is 1950s – 1970s single-story tract homes, often with attached garages and later room additions, which means we regularly open a wall on a “simple” vanity swap and find a previous remodel’s plumbing done without a permit. Older bathrooms in these homes often still have original cast iron drains and undersized venting, so we plan for discovery rather than pretend it won’t happen. Summer heat above 90°F also affects tile and grout curing, which we schedule around. If you’re pulling this into a Bathroom Remodeling in Vincent scope, the permit list expands accordingly.
Serving Vincent, CA – Our Local Coverage Area
We serve Vincent and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Vanities, Tile & Fixtures in Vincent

Most jobs run 1 – 3 weeks from demo to final walkthrough, with the tile and vanity stages absorbing the bulk of it. Permitting through LA County can add 2 – 4 weeks before work starts, so build that into your calendar. Call (888) 271-7872 and we can give you a firm timeline against your specific bathroom.
A straight swap of a vanity or a tile refresh typically doesn’t need one, but moving plumbing, adding a shower, or altering electrical does. Because Vincent runs on County permitting, we confirm jurisdiction before filing and pull the permits ourselves. Call for a free estimate and we’ll tell you what your job actually requires.
Yes, and it’s the most common scope we quote. Leaving the drain and supply lines where they are keeps the job faster and cheaper, and most Vincent homeowners choose that path. If you want a different layout, we’ll show you the cost delta before you commit.
A vanity-only install runs $800 – $3,000, and a full bathroom scope with tile and fixtures runs $9,000 – $28,000. Where you land depends on size, material grade, and whether plumbing moves. Call (888) 271-7872 for an exact quote; estimates are free.
Every installed vanity, tile, and fixture is covered by our 730-Day Done Right Promise. If something fails because of how we installed it, we come back and make it right, no fine print. Homeowners often pair this scope with Tile Roofing in Vincent or Specialty Roofing in Vincent while we’re already on site.
Get a free estimate for Vanities, Tile & Fixtures in Vincent
We’ll come out to your Vincent home, measure the bathroom, check what’s behind the existing tile and vanity, and hand you a written line-item estimate with a fixed price. No surprise change orders, no vague allowances. Our technicians bring up to 12 years of experience and every call is answered by a live person, 24/7. Call (888) 271-7872 to schedule, or reach our Bathroom Remodeling team for the wider scope. We cover all of Vincent and the surrounding San Gabriel Valley.
Written by the team at Groundwork Construction Co.












