







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Valinda: What You’re Actually Getting Into
A paver driveway in Valinda typically runs $7,000 – $18,000 installed, takes 3 – 6 working days from demo to final compaction, and outlasts poured concrete by decades when the base is built right. The price swings mostly on square footage, base depth, and paver grade. If you’re budgeting right now, call (888) 271-7872 and we’ll walk you through realistic numbers for your lot. This page is only about paver driveways, not the wider paving scope.
How a Paver Driveway Goes In, Day by Day

Most companies describe paving as one blurry process. It isn’t. Here’s the real sequence we follow on Valinda jobs, with the decisions landing on you at each stage.
Day 1 – demolition and haul-off. We saw-cut and break out the existing surface, whether that’s cracked concrete, worn asphalt, or old pavers, then load it into dumpsters sized to your square footage. You decide now if any of the old material gets reused as base aggregate (sometimes worth it, often not).
Day 2 – excavation and base. We dig down 6 – 10 inches depending on soil and traffic load, then lay compacted Class II base rock in 2 – 3 inch lifts, wetting and plate-compacting each one. This is the stage that decides whether your pavers stay flat or sink in five years. Skipping depth here is the most common corner-cut in the trade.
Day 3 – bedding, edge restraint, and drainage. A 1-inch sand setting bed goes down, then steel or concrete edge restraint around the perimeter, then grading so water sheds toward the street or a dry well instead of pooling against your garage slab. You confirm the slope direction before we lock it in.
Days 4 – 5 – laying and cutting. Pavers go down in your chosen pattern, with field cuts at the borders and around the apron. You inspect the pattern orientation and border color before we move to the next step.
Day 6 – compaction, joint sand, and cleanup. Plate compaction seats the pavers into the bedding, polymeric joint sand goes in, and we sweep and wash down. You get a final walkthrough with us on-site. That’s the whole job, and it’s covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Pick Between on a Valinda Paver Driveway
Pavers aren’t one product. These are the real choices, and what each costs you in money and upkeep.
- Concrete pavers (interlocking). The standard, and most of what we install in Valinda. Range $3 – $7 per square foot for the paver itself, holding up well under the inland heat. Available in 60mm (residential) and 80mm (driveway-grade) thickness. Always ask for 80mm on a driveway.
- Clay brick pavers. Warmer look, exceptional colorfastness, but pricier at $5 – $9 per square foot and heavier on the install labor. A good fit if you want a traditional curb appeal and don’t mind the upcharge.
- Permeable pavers with open joints. Lets rainwater drain through the surface, which helps on Valinda lots where the grading runs toward the street. Costs 10 – 20% more than standard pavers, and the base prep is deeper. Worth it if ponding is a known issue.
- Pattern and border choices. Running bond, herringbone, and basketweave are the common picks. Herringbone is the most durable under tire traffic; a contrasting border strip adds $200 – $600 and a lot of visual polish.
- Color and finish. Standard, tumbled, or shot-blast finishes. Tumbled reads older and softer; shot-blast is more slip-resistant in the wet season.
What Paver Driveways Cost in Valinda, CA

Standard paver driveway installation in Valinda runs $7,000 – $18,000 for a typical two-car driveway, with the number landing low or high based on five things.
- Square footage. A 400-square-foot driveway sits at the low end; 800 square feet of frontage pushes toward the top.
- Existing surface and demo. Breaking out thick old concrete and hauling it off adds $800 – $2,000 versus starting from bare dirt.
- Base depth and soil. Deeper base (needed where the soil is expansive or grading is off) adds cost. On Valinda’s older lots, this is almost always a factor.
- Paver grade. 80mm paver plus upgraded color runs higher than a 60mm standard paver.
- Drainage and edge work. Dry wells, channel drains, and heavy edge cuts around an irregular apron add $500 – $1,500.
Our written estimate itemizes the base depth, paver spec, edging, and drainage line by line, with the price locked before we start. What it typically doesn’t include: relocating a gas or water line under the driveway (we’ll flag it and quote separately), or landscape restoration beyond the work area.
See the difference
Before
After
Before
After
Before
AfterWhat Valinda Lots Do to a Paver Driveway
Valinda isn’t a standard subdivision. It’s an unincorporated stretch of the San Gabriel Valley where the lots are unusually deep and irregular, and much of the housing is older, owner-built, and self-managed. The driveway job reflects that. On most Valinda jobs, we’re working around a rear addition, a converted detached garage, or a gate that wasn’t in the original plan, which means the paver field has to be laid around setbacks and structures instead of a clean rectangle.
Permitting runs through LA County Building and Safety rather than a city department, so if your project touches the right-of-way or alters drainage toward the street, expect county review and a longer lead time. The inland heat that pushes summer highs past 95°F does one helpful thing for pavers and one less helpful one: it cures the base fast and accelerates joint-sand degradation, so we spec polymeric sand and recommend a refresh every few years. Mixing paving with a larger project, like the ADU Design & Permitting in Valinda we handle, often makes sense when the work touches the same setbacks. Call (888) 271-7872 to talk through your lot’s specific profile.
Serving Valinda, CA – Our Local Coverage Area
We serve Valinda and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Valinda

Plan on 3 – 6 working days for a standard two-car driveway, weather permitting. Demolition and base prep take the first two to three days; laying and joint sand finish the rest. Larger or irregular Valinda lots with tighter access can run a full week.
Usually not for a straight replacement within your existing footprint, but most Valinda projects touch setbacks, drainage, or a structure, which does trigger LA County Building and Safety review. We flag permit scope on the estimate so you’re never caught off guard.
Yes, in most cases. We lay pavers up to the existing garage slab and leave buried utilities alone. If a gas line or water line crosses the driveway alignment, we’ll note it and quote any relocation separately before we start.
The range is $7,000 – $18,000 for a typical residential driveway, with square footage, base depth, paver grade, and drainage driving the final number. Call (888) 271-7872 for a written, line-item estimate, and the price is locked before we start.
Every paver driveway we install is covered by our 730-Day Done Right Promise: if the work isn’t right, we make it right. That covers workmanship on base prep, setting, and compaction, plus manufacturer coverage on the pavers themselves.
Schedule a Free Paver Driveway Estimate in Valinda
Tell us the square footage, what’s there now, and what you want it to look like. We’ll visit the site, walk the base and drainage, and hand you a written line-item estimate at no cost. Calls are answered by a live person around the clock, and every technician is background-checked and arrives in uniform. Call (888) 271-7872 for paver driveways in Valinda, and we’ll get the number to you in writing.
Written by the team at Groundwork Construction Co.












