A Groundwork company - serving El Monte, CA
A new herringbone paver driveway

Brick Paver Driveway in El Monte, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in El Monte
A new paver patio with a seat wall and fire pit
A new paver pool deck
A new wood side gate with black hardware
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
New architectural shingles with a clean valley
A new casement window over a kitchen sink
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Brick Paver Driveway in El Monte, CA

Brick paver driveway installation in El Monte typically costs $14 to $26 per square foot for the pavers and base, with most full driveways landing between $8,400 and $22,000 depending on size, base depth, and demolition. Paver driveways last 25 to 50 years, get stronger as the interlocking surface settles, and can be repaired one brick at a time instead of being torn out and repoured. We install clay brick and concrete paver systems across El Monte and the surrounding San Gabriel Valley, built to handle the heat, the occasional monsoon-summer downpour, and the heavy multi-car loads that come with many of the lots off Valley Boulevard and Lower Azusa Road.

The point of a brick driveway is that it’s a system, not a surface. The bricks are the part you see. Underneath, a compacted aggregate base, a bed course, and polymeric joint sand do the actual load-bearing, drainage, and weed control. When any one layer is skipped or thinned to save a day, the pavers shift, rut, and pop within a season. We build the whole column, no shortcuts, and back it with our 730-Day Done Right Promise. This page covers the brick side specifically. For the full range of hardscape work we do, including concrete, permeable systems, and aggregate, see our Driveway & Pavers hub. For area-wide detail, the Driveway & Pavers in El Monte page has neighborhood-level pricing and seasonal notes.

Call (888) 271-7872 and a live person picks up, any hour, any day. No voicemail. The number you see is the number you pay, and the estimate and design consult are free.

A crew setting pavers over a compacted base

When You Need Brick Paver Driveway

Most El Monte homeowners call us after a specific failure or a specific plan, not in the abstract. Here are the situations that come up most often.

  • Your asphalt has reached the end of its useful life. A 20-to-25-year-old asphalt driveway in El Monte can show spider web cracking, sunken ruts under the car tires, and alligator cracking along the apron. Once the base has failed under the asphalt, the asphalt’s going to fail again, so the fix is a new base with pavers over it. We see this cycle most on the older lots east of Santa Anita Avenue.
  • Your concrete has heaved or cracked from tree roots. El Monte’s mature ficus and liquidambar trees push up slabs and lift the driveway edge. Every lift point can be a fresh crack after a hard rain. A paver system with a flexible edge restraint and a properly trenched base resists this better than a poured slab, because the bricks can flex over small root movement without shattering.
  • You’re adding a second vehicle or an EV charger. Homes along Peck Road and in the Mountain View area are adding vehicles, which means widening the driveway or replacing a single-car width with a proper double. Paver installation lets you match to the exact edge, curve, and grade, and we can run conduit for the charger during the same dig.
  • You’re doing a whole-property refresh. A brick paver driveway ties in cleaner with a new front walk, planting beds, and a low retaining wall than a gray slab. When the rest of the yard is getting upgraded, the driveway is the single biggest visual element on the front of the house.
  • You have a drainage problem in the driveway. Water pooling at the garage threshold or running into the garage is a common complaint after El Monte’s summer storms. A paver system gives us more control over slope and drainage because we can set a specific cross-slope and add channel drains or permeable joints at the same time.
  • You want to crack-seal or replace asphalt every other year and stop. Asphalt maintenance in El Monte’s climate typically means sealing every two to three years. Brick pavers need sand top-off every few years and nothing else until one brick cracks or a tree root pushes one up.

Our Brick Paver Driveway Process

Every install follows the same six-step sequence. We don’t skip steps or merge them into one long day to shave labor. The sequence exists because a failed driveway is almost always a step that got rushed.

  1. Site visit and grade check. We measure the driveway, check the slope toward the street and the garage, confirm utility locations, and look at what’s under the existing surface. If there’s a buried utility line, drain line, or old footing to work around, we find it before the first cut.
  2. Demolition and haul-off. We break out the existing asphalt, concrete, or pavers, load it out, and inspect the base underneath. Old asphalt is often a poor base for new pavers because the edges and joints have already failed, so we usually remove it entirely rather than pave over it.
  3. Excavation and new base. We dig to the right depth for the paver thickness plus the bedding sand plus the compacted aggregate base. For a residential driveway in El Monte, that’s usually a 4-to-6 inch compacted Class II base on top of native soil, sometimes deeper where the original subgrade was soft or wet. We compact in lifts so the base is dense and doesn’t sink later.
  4. Edge restraint and laying course. We set a concrete or aluminum edge restraint on the sides that will hold the pavers under load, then screed a level bed of bedding sand. The bricks or pavers go down in your chosen pattern, cut at all edges and curves with a wet saw for clean lines.
  5. Compaction and polymeric joint sand. We run a plate compactor over the finished field, sweep polymeric sand into all joints, and activate it with a light mist. The polymer locks the sand and reduces weed growth, ants, and washout from rain.
  6. Final walkthrough and cleanup. We walk the driveway with you, check the slope, check the joints, and confirm the apron and drainage. Any loose brick or edge gets reset. Then we clean the site, haul the last of the debris, and leave the driveway ready to drive on the next day.

Technicians on every job are background-checked and arrive in uniform. Our technicians have up to 12 years of experience installing pavers in the San Gabriel Valley, and they’ve seen how the local soils behave after a wet winter versus a dry one.

Materials we work with

We install clay brick and concrete paver systems from regional and national manufacturers, and we can source tile-style porcelain pavers for a driveway that needs a modern look with a tighter joint. If you’ve got a pattern in mind (running bond, herringbone, basketweave, or a border-and-field design), we can lay it out on the base before the first brick goes down. We don’t carry brick on a truck, so the exact brick color and pavers come from a manufacturer and are on site before demo day.

We also build adjacent hardscape in the same project: front walks, planting bed borders, retaining walls, and driveway aprons. If your project expands into a covered carport or a small structure at the end of the driveway, visit our Home Additions & ADU page. Our home page has the full service list and the brand partnerships we work with.

New double-hung windows in a dining room

Brick Paver Driveway Pricing in El Monte

Brick paver driveway pricing in El Monte falls into a predictable band because the labor and materials are fairly consistent by driver, not by which contractor you hire. The ranges below are honest and reflect what we see installing in the city, not national averages.

Line item Typical El Monte range Notes
Demolition and haul-off (asphalt or concrete) $1.50 – $3.50 / sq ft Concrete is at the higher end because of weight and disposal fees
Base excavation and compacted aggregate $3.00 – $6.00 / sq ft Increases with soft soil or a deeper base for heavy vehicles
Clay brick pavers, standard pattern $5.00 – $9.00 / sq ft Field bricks; per-brick cost
Concrete pavers (interlocking system) $4.00 – $8.00 / sq ft Wider color range, often lower than clay brick
Bedding sand, polymeric joint sand, edge restraint $1.50 – $3.00 / sq ft Not skippable; a common corner cut by low bids
Curbs, borders, or pattern work (herringbone, borders) Add 10 – 25% to paver cost Herringbone and field with border takes longer to lay
Drainage additions (channel drain, grate) $250 – $900 / unit Usually one unit at the low point near the garage
EV charger conduit run under driveway $300 – $700 Worth running during the dig, not after

A standard two-car driveway in El Monte is typically 450 to 700 square feet, so a full removal-and-replace lands roughly like this:

  • Small (one-car plus walkway), 300 – 400 sq ft: $8,400 – $12,500
  • Standard two-car, 450 – 700 sq ft: $12,000 – $20,000
  • Wide or RV-pad driveway, 800 – 1,200 sq ft: $20,000 – $31,000

What moves the number

Driveway size is the biggest driver. Second is what’s under the existing surface: if the subgrade is wet, soft, or full of old rubble (common in parts of El Monte built up before modern grading), the base gets deeper and the price climbs. Third is paver choice; clay brick is at the higher end, concrete pavers are lower, and porcelain runs higher than both. Fourth is pattern and borders, which affect labor hours. Fifth is drainage, which is a small line item but adds real value when a driveway has a known water problem.

What we include in every quote

  • On-site measure and grade check, free
  • Written quote with each line itemized, no “misc” line
  • Paver manufacturer, color, and pattern named in writing
  • Base depth specified by number, not by feel
  • Drainage plan described, including where water exits the driveway
  • 730-Day Done Right Promise, in writing, on all workmanship
  • 0% financing for 18 months available, and $1,000 off projects over $10,000

Upfront pricing, no surprises. The number on the quote is the number you pay unless you add scope in writing, and we don’t add scope after the pour or after the pavers are cut. Call (888) 271-7872 for a free estimate on your specific driveway.

How long does a brick paver driveway take to install?

Most residential brick paver driveways in El Monte are completed in 3 to 6 working days once we start. The range comes from the sequence: demo and haul-off is one day on a typical driveway, base excavation and compaction is another day or two, and installation plus joint sand and cleanup is one to two more. Driveways that require significant base replacement, deep excavation, or a custom herringbone pattern with borders run toward the longer end. We schedule demo, base, and pavers as separate days so each step cures or compacts correctly. Call (888) 271-7872 if you want a dated schedule for your driveway.

Brick pavers vs. stamped concrete for a driveway in El Monte?

Brick pavers win for repairability and long-term drainage, and stamped concrete wins on upfront cost. Stamped concrete typically runs $8 to $15 per square foot installed, so it comes in below brick or clay pavers for a standard driveway. But a stamped concrete driveway in El Monte’s summer heat will eventually crack, and once it cracks, the only fix is to replace a section or overlay the whole thing. Brick and concrete pavers are laid as individual units, so a single heaved paver from a tree root or a utility cut is a small repair, not a driveway replacement. Pavers also drain at the joints, which matters on lots where water pools near the garage. Call (888) 271-7872 and we’ll price both for your driveway so the comparison is on your numbers, not a general one.

Can brick pavers handle my car, truck, or EV in El Monte heat?

Yes, a properly built brick paver driveway handles standard passenger vehicles, pickups, and EVs without issue. The load-bearing capacity comes from the compacted base and edge restraint, not the brick itself. Two details matter in El Monte specifically. First, the base needs to be compacted in lifts, so a 6-inch base is not one 6-inch pour of gravel; it’s three 2-inch lifts with a plate compactor between each. Second, edge restraint needs to be set into concrete or spiked, because a truck’s turning wheel can push an un-restrained edge out over a season. We specify both on every driveway. For heavier vehicles or an RV pad, the base depth goes up; tell us what you park and we size it for that load. Call (888) 271-7872 for a driveway sized to your vehicles.

Do I need a permit for a brick paver driveway in El Monte?

In most cases, replacing a driveway surface at the same footprint doesn’t require a building permit in El Monte, but changes to the driveway apron at the public sidewalk or street, and any work that alters drainage to the street, can trigger a permit through the city. Because the rules depend on your specific lot and what the existing apron looks like, we check the permit requirement during the estimate rather than guess. That check is part of the free estimate. Call (888) 271-7872 and we’ll tell you what your project needs before you sign anything.

What’s the 730-Day Done Right Promise, and what does it cover?

The 730-Day Done Right Promise is our two-year workmanship guarantee: if something we installed isn’t right, we come back and make it right. It covers installation issues like settling pavers, joint sand washout, edge restraint lifting, and pattern or cut problems. It does not cover damage from tree roots growing under a driveway, vehicle impact, or improper use like jacking a heavy trailer on one spot. We put the promise in writing on the quote, and we stand behind it. Call (888) 271-7872 for a free estimate and a copy of the promise.

Do you offer financing or any current promotions?

Yes. We offer 0% financing for 18 months on approved projects, $1,000 off any project over $10,000, and a free project estimate and design consult. The three standing promotions apply as written and aren’t conditional on a particular day or season. On a $14,000 brick paver driveway, that’s $1,000 off before financing, which moves the cash outlay into a range some homeowners can pay down over a year and a half without interest. Call (888) 271-7872 for exact numbers on your driveway.

How do I know a paver driveway won’t fail like my asphalt did?

Failures come from the base, not the pavers. Asphalt on a failed base fails again; pavers on a properly compacted base last decades. When we quote a brick paver driveway in El Monte, we specify the base depth, the compaction method, and the edge restraint in writing, because those are the parts that decide whether the driveway lasts 20 years or 3. A driveway installed over wet, uncompacted, or too-shallow base will rut and shift within a season. We inspect and rebuild the base as part of the job. Call (888) 271-7872 and we’ll walk your current driveway and tell you what’s happening underneath it, free.

What can I do to maintain a brick paver driveway in El Monte?

Most of the maintenance on a brick paver driveway is a sand top-off and a sweep, not a yearly seal. Every two to three years, top off the joints with fresh polymeric sand where it’s worn down, and sweep off leaves and dirt so water can move off the surface. Avoid pressure-washing at high pressure, which can blow out joint sand; a garden hose and a stiff broom handle most of it. After El Monte’s summer storms, check the apron and the low point near the garage for ponding and clear any leaf dams. If a paver cracks or a tree root lifts one, a single brick can be pulled and reset; it’s a small repair, not a driveway replacement. Call (888) 271-7872 if you’re seeing shifting or joint washout; we’ll look at it during the free estimate.

Do you install permeable or drainage-focused paver driveways?

Yes, we install permeable paver systems and conventional driveways with added drainage. El Monte lots often have a grading problem where water drains toward the garage rather than the street, and a paver install is a good time to correct it. We can set the cross-slope properly, add channel drains at the low point, and use permeable joint material in the field for better infiltration. We don’t promise a fully permeable system works on every lot; soil conditions and the slope to the street limit how much water the ground can absorb. We check during the estimate and tell you what will actually work on your lot. Call (888) 271-7872 for a driveway drainage plan.

Can you handle a driveway that ties into a new front walk or retaining wall?

Yes, and it’s usually better to plan those together than to install the driveway and add hardscape later. A new brick paver driveway is the right moment to run matching brick for a front walk, add a low retaining wall at a grade change, and line the bed borders, all in one sequence so the pavers, steps, and edges meet cleanly. A driveway installed on its own and a driveway installed with matching adjacent hardscape look different. For a full property refresh that expands past the driveway, our service lines run from Roofing to Windows & Doors to Fence Installation, and we handle them as one project. Call (888) 271-7872 and we’ll quote the driveway and adjacent work on one estimate.

Why choose Groundwork Construction Co. of El Monte for a brick paver driveway?

We build pavers the same way we build every project: with a specified base, a written quote with itemized line items, background-checked and uniformed technicians, and the 730-Day Done Right Promise on all workmanship. Our technicians have up to 12 years of experience with paver installation in the San Gabriel Valley, including driveways in South El Monte, Rosemead, and Temple City. Calls are answered live, 24 hours a day, seven days a week, which matters when a demo day is tomorrow and you have a question. We don’t subcontract the paving work, and we don’t replace a paver job with a truck-sourced brick delivery; the bricks are specified, ordered, and installed on a dated schedule. On a $14,000 driveway with $1,000 off and 0% financing for 18 months, the monthly figure is real, not a sales tactic. Call (888) 271-7872 and we’ll walk your driveway and quote the job before you commit to anything.

FAQs – Brick Paver Driveway

How much does a brick paver driveway cost in El Monte?

A brick paver driveway in El Monte typically costs $14 to $26 per square foot installed, which lands most standard two-car driveways between $12,000 and $20,000. Clay brick runs $5 to $9 per square foot for the pavers themselves; the remaining cost is demolition, base excavation, bedding, joint sand, and edge restraint. Call (888) 271-7872 for a free itemized estimate on your driveway.

How long does a brick paver driveway last?

A properly installed brick paver driveway lasts 25 to 50 years, and the pavers themselves often outlast the underlying base. Failure usually comes from the base or edge restraint, not the brick. A driveway with a properly compacted base and concrete or spiked edge restraint on a suitable lot holds up decades longer than an asphalt driveway that needs sealing every two to three years. Call (888) 271-7872 for a free estimate and we’ll tell you what your current driveway is doing.

Can you install a brick paver driveway in El Monte in winter or during rain?

We install brick paver driveways year-round in El Monte, but we schedule around rain. Wet native soil can’t be compacted correctly, and a paver base laid over wet subgrade will fail later; we either wait for a dry window or protect and dry the excavated area before compacting. We don’t pour concrete or set base in standing water. Winter is actually a reasonable time to plan a spring install, since the estimate and design consult are free and we can lock in a pavers order early. Call (888) 271-7872 to get on the calendar.

Do brick pavers need to be sealed?

Brick pavers don’t require sealing to perform, and most installs we do get their durability from polymeric joint sand rather than a surface sealer. Sealing can help on very light-colored pavers or on pavers exposed to hard water, but it’s optional and requires reapplication every few years. We build polymeric sand into every install. Call (888) 271-7872 for a free estimate and we’ll tell you whether your pavers need a sealer, honestly.

Will a brick paver driveway increase my home value in El Monte?

A brick paver driveway improves curb appeal and can return a meaningful portion of its cost through resale, though the exact return depends on your market and the rest of the property. In El Monte, where many homes have a dated asphalt or concrete driveway, a clean paver drive with matching front walk and borders stands out on the block. It also makes the property easier to sell because a buyer doesn’t have to plan a driveway repair. Call (888) 271-7872 for a free estimate so you can price the project against your home’s value.

Ready to get a brick paver driveway quoted in El Monte? Call (888) 271-7872 and a live person picks up any hour, any day. We’ll walk your driveway, check the grade, and hand you an itemized written quote with a specified base depth, the paver manufacturer and color named, and the 730-Day Done Right Promise in writing. The estimate and design consult are free, and the standing promotions are real: $1,000 off projects over $10,000, 0% financing for 18 months, upfront pricing with no surprises. Call today.

Written by the team at Groundwork Construction Co. of El Monte, serving El Monte.

Getting started with Groundwork in El Monte

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your El Monte team

A local vetted partner works across El Monte and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in El Monte? Licensed & insured · free written estimates
Call (888) 271-7872
Local Service Coverage

Request a Free Estimate in El Monte

Tell us what you need - Groundwork Construction Co. of El Monte responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch